Hello everybody and welcome to another video review. Today we’ll be taking a look at the
Creality Smart Kit which was sent to me for review purposes. No money has exchanged hands,
so this will represent my personal opinion on the device and will be followed up with a detailed
video discussing what the company could do to improve the follow-up version of this product.
I personally like to see companies improve, so I hope they will take the information I present
in these two videos to create something that pushes innovation. I will be posting a link in
the description below as to where you can actually purchase this device, however I
strongly recommend you watch until the end of the video before you even click on that link.
So what is this set of devices supposed to do exactly. Well,
the intended goal is to be able to easily control your printer remotely while being able to check
on the printing status visually. Now the idea behind this product is good however as we’ll
discuss latter on in this video how the implementations just isn’t that great.
So this kit includes the Creality Wi-Fi Box along with a webcam and before starting
anything I wanted to so see if any of these devices would work offline. During my tests,
and attempts at hacking the devices, I discovered quite a few important details.
First off the camera is pretty standard, so you can actually use like a normal webcam
and although the video quality is too bright to begin with, once you adjust your settings it’s
actually a decent camera. As for the Wi-Fi Box, unfortunately that’s where the issues started to
creep up. Now luckily for me, I had two of these on hand, and I was able to sacrifice one in the
name of experimental hacking. Now I personally am not skilled at this endeavour, however I did come
across some instructions online which seem to be processing, so I decided to give it a shot.
And I promptly bricked the device, and it hasn’t really worked since, so that didn’t go as planned.
Turning my attention to the backup Wi-Fi Box I began the setup process.
The machine doesn’t come with the power adapter, so you’ll need to use one that’s 5Volts to 2Amps,
which most phone adapter’s use. You won’t be able to connect to the device without installing the
app, which is a little disappointing since it means that people like me can’t really use if
for client work because of security issues. Also, this won’t work with anything but your cell phone,
which means you’ll be forced to use the built-in slicer program to get it to work correctly. Once
again, we’re going to be a little limited on our use case for this. So once you plug in the Wi-Fi
box with an internet cable, the lights should look like this when they are fully functional.
When you first open the app, you’ll be greeted by a welcome screen which has a
browse only mode and a term agreement mode. By selecting the browse only mode you’ll only be
able to look at the content and won’ t be able to access any of the services which are provided by
the cloud which includes the slicing of 3d models. So if you want to use the device, you’re going to
need to agree to the terms of service. There are four tabs at the top of the screen which allow
you to change between content. The follow tab is where you’ll go to follow your favourite designers
and get up to day info about their designs. The “For You” tab is recommendations that will be
made to you by Creality Cloud. Groups is where you can join groups that has content you want to
stay up to date with. The last tab is the models one, where you can search for models to print.
To be able to slice the downloaded files, you first need to create a creality account. You
will be prompted to create the account the moment you attempt a download. There are two options for
this, one is you can use your phone number and the other is through e-mail. I choose to use my
phone instead, at which point I received a confirmation number to complete the setup.
In order to add a printer, you’ll first need to sink up the Wi-Fi box. To do so, you’re going to
go to the bottom right corner of the screen to the “Me” button. From here, you’ll select “Add
Device” and choose “Scan or Code” since this will be the easiest solution. If you haven’t already,
you will be prompted to give access to your devices' camera. From here you can easily
scan the QR code which will allow you to select from two options. Depending on how your printer
is to be connected to the Wi-Fi Box, you’ll choose the option accordingly. They do a good job
of informing the user of what they need to do in order to make sure that the connection is made to
the device. At this point, you will be given the password for the Wi-Fi Box, which is a default of
12345678. This is where you’ll be redirected to your network and internet options, where you can
enter the password to connect with the device. After entering the password I could clearly see
that I was properly connected to the Wi-Fi box but the box itself wasn’t recognizing the Internet
connection. From this point, I tried pretty much everything I could think of. I rebooted the Wi-Fi
Box, followed by my network router, and tried resetting them to the factory defaults. I then
proceeded to troubleshoot my hardware by replacing both the network switch and the cables to ensure
that it wasn’t a faulty connection. My unit no matter what I tried just wouldn’t connect
to the internet, which means it's pretty much useless. Once you have your device linked up,
it seems like you can add multiple printers to that device, however I was not able to test
this feature because the device wasn’t working correctly. This brings up a glaring issue with
the device. The Wi-Fi box is pretty much useless if it’s not connected to the Creality Cloud.
So was this product even what people were looking for? I’d argue that probably not, although I could
easily see how someone who was looking from the outside of the community might think so.
If this product was intended to rival Octoprint, it needed to provide a very similar and secure
service that was stable. Now to be clear Octoprint does have its own issues however there are ways in
which you can actually use it offline. Octoprint also allows the user to slice their models
with their own software, rather than relying on someone else's settings to do the job correctly.
This product requires Creality Cloud access and transfer the data to the device via Wi-Fi,
which inherently make the data more unstable when compared to a wired connection. We’re also limited
to a maximum of 2 devices. A great innovation would have been to allow the user to be able to
connect at least 3 to 4 printers and control these remotely. This however is not the case either.
Frankly, I’m very disappointed with creality since this is the first product I’ve used
from them which didn’t work out of the box. And my final verdict is a 0/10. It couldn’t
do its basic function and as such it failed to deliver on its promise to its user base. Having
a working camera means nothing if the user didn’t intend to use the camera on its own.
If you’ve spent money on this device, I feel very sorry for you and I really hope they send
you a working device or refund what you paid for it. As I said before I will be posting a
link for the product in the description below, but unless you’re a talented hacker this might
not be the best solution at the moment. If Creality is able to release a product which
functions offline and is resilient enough to compete with octoprint then I will re-visit
this specific review in the future. As I said before, I intend to do a breakdown of what they
could do to improve the user experience if they choose to release a new version in the future.