Welcome to Sage Audio. Today we’re talking about How to Master for Streaming
But first, if you have a mix that you need mastered
send it to us at SageAudio.com to receive a free mastered sample of it.
Loudness Normalization
When mastering for a streaming service, loudness normalization is an important
topic - since it’ll cause the amplitude of your track to potentially be altered
during playback. Most services utilize downward normalization,
meaning your track is turned down if it goes above a pre-determined LUFS.
I’ll create a -14 LUFS signal, and a -8
LUFS signal. Then I’ll use -6dB of clip gain on the louder track
to match them and simulate normalization. Let’s see if we can hear a difference between the 2.
Apple, Spotify, Tidal, YouTube, and More
Different streaming services like Apple, Spotify, Tidal, YouTube, and more normalize
audio to different LUFS settings, and may utilize upward and downward normalization,
or just downward. For example, YouTube only uses downward normalization,
and will only turn audio down if it’s too loud, not up if it’s too quiet.
Just about all of these
normalize to -14 LUFS. Let’s listen to a signal pre and post-normalization.
How Encoding Affects Volume
Another thing to consider is how encoding or the translation of a lossless file to a lossy file
changes the amplitude. When the resolution gets reduced, so too does the accuracy of the amplitude
- causing clipping distortion; to avoid this it’s recommended you set your ceiling to -2dBTP.
I’ll simulate how a track would clip after encoding, so you can hear the effects.
Oversampling
When you’re trying to avoid clipping distortion after encoding, like when mastering for streaming,
oversampling can be helpful, since it’ll reduce the amount of clipping distortion.
To avoid clipping distortion post encoding, I’d recommend lowering the ceiling of the limiter,
using a little lookahead, and 4x or more oversampling.
Let’s listen to a pre and post-oversampled signal to see if we notice a difference.
True Peak Metering vs. TP Limiting
Although you may be using a true-peak meter to measure the level of your signal,
this is different than true peak limiting. True peak limiting utilizes
true peak metering to determine where clipping would occur,
but then compensates for these peaks, sometimes to the detriment of your transients.
With that in mind, it may be better to simply lower your
limiters ceiling and use oversampling instead.
Let’s compare the two.
The Issue with Dynamics
Although more dynamic is typically thought of as better, when the audio is normalized,
this can become an issue. For example, if your LUFS is -18, and you have a -2dB peak, your
signal will be increased by about 4dB, causing the streaming service to utilize a limiter.
This situation isn’t ideal, since you can control how that limiter will alter your signal.
Let’s take a listen to a track with these levels for reference.
Target Loudness
Many engineers ask, why go above -14 LUFS if it’ll be normalized? There are a lot of answers to this
but in short, you never know when normalization settings will change, the timbre of a louder
master is different and can be beneficial, and some listeners turn normalization off.
Furthermore, some services don’t normalize so you’ll need to keep that in mind.
With this in mind, let’s listen again to the -14 LUFS
and normalized -8 LUFS master to see if we hear a difference in their timbres.
Target Loudness Limiters
Although target loudnesses should typically be avoided, some limiters have target loudness
functions, which can be convenient if you want to preview how that loudness will sound.
Izotope’s Maximizer and TC Electronic’s brick wall limiter are examples of these,
but more will probably be released in the near future.
Let’s listen to a signal being normalized by TC Electronic’s brick wall limiter.
Upward Compression and Normalization
If you want your master to sound aggressive like a loud master, but you don’t want normalization to
affect your peaks, utilize low-level compression. This will increase the detail of your track
from the bottom up, leaving your peaks alone, and somewhat negating the need to master loudly.
Let’s listen to a master with low-level compression at -14 LUFS,
and one without low-level compression at -14 LUFS.
If you have a mix that you need mastered send it to us
at SageAudio.com to receive a free mastered sample of it.
Also, Subscribe to stay up to date on all of our latest releases. Thank you so much for watching!