hi I'm Mike the 1a auto we've been
selling auto parts for over 30 years
[Music]
[Applause]
over our hood there are two positions
for the prop rod there's a normal
position and then there's also a further
maintenance position so I'm going to set
it in that one a little more access to
get this cowl panel off the strap by
removing this weather seal simply just
lift it and pull it right off and I'm
gonna put that aside so we can reuse it
to remove this upper part of the cowl
cover there's three Clips there's one
here one in the center and then one on
the passenger side so I'm gonna use a
clip prying tool slide it under there
you can kind of feel the clip underneath
just try to pop it up
actually use some needlenose pliers to
squeeze the clip together underneath pop
it up
you lift up the center part just kind of
pull it off of the middle and pull it
out and up it's got clips to it lift it
straight out it's got a bunch of clips
get the other side free so this one's
just kind of stuck in it push down here
lift up here there we go kind of will
roll it forward because the washer
window washer hose is underneath pop it
out let's see the easiest way there's a
coupler right here so I will disconnect
it right here clip that back in you can
see all of the clips that are holding
this in now we take this out to remove
this metal cowl piece that's underneath
the plastic there are two 12 millimeter
bolts on both the drivers in the
passenger side and then a ten millimeter
bolts in front of those on both the
driver and the passenger side I'm going
to start with the ten millimeter bolts
put that bolt aside these look a little
bit rusty so I'm gonna spray some rust
penetrant on them again the more
callable ten millimeter one first switch
to a twelve millimeter socket to remove
these two bolts
I'm gonna spray some rust penetrant on
these now I move them out a little bit
I'm gonna turn them back in cause I want
to work the rust penetrant into the
threads now I'm gonna start turning them
back out you may have to repeat this a
couple times to get them to come out
smoothly and I've gotten out without
breaking it the same over here with some
rust penetrator we're gonna just do the
same thing don't you know applying rust
penetrant just trying to work it in the
threads so these bolts come out smoothly
in addition to these bolts there's one
bolt at the rear that's sort of vertical
on either side both the drivers in the
passenger side spray some rust penetrate
on that one because we can see the
backside of it this is a 10 millimeter
got it broken free I reach in there and
a little bit with my hand and do the
same for the bolts on the other side
one final ten millimeter bolts directly
in the middle spray some rush better
turn in there as best I can
just trying to get that bolt out and to
fall at least on this collar piece
didn't sound like it went all the way
down so maybe it's still caught in the
copy so I'm going to carefully pull the
collar piece out
well actually I can see the bolt fell
down here under the wiper transmission
so I've got it I'll be careful removing
this it's got some finishes on here you
could cut your hands so just be careful
taking us out of here and handling it
we're gonna put it aside because we can
definitely use this obviously but now we
have access to the back of the engine
leave that purge valve is located here
on top of the throttle body remove it
take some needle nose pliers squeeze
this clamp out of here just hose it's
kind of stuck on there I'm gonna take
this pick just kind of work it under the
hose just want to loosen the hose from
the evap purge valve
disconnect the electrical connector push
it in the lock actually it's clipped
into here so to give me a little more
room to move
pop the harness out of here push it in
pull it off okay
two eight millimeter bolts holding it in
don't loosen those with 8mm in your
socket carefully remove these I'll drop
them
pull the valve out it's gonna a ring
sealing it in there's it's kind of wheel
it back and forth
pull out at the same time so here's our
original evap purge valve from our
vehicle
a brand new one for money auto comm
comes the new o-ring on their same
mounting holes same tube port same style
electrical connector supposed to fit in
and work great in our vehicle just to
help with the install taking a tiny bit
of white grease I'm gonna put it around
the o-ring so it slides back into place
easier install it push it into the port
just screw installed don't worry if it
doesn't push all the way in these screws
are pretty long so I'm gonna use those
to draw it in evenly yeah just going
back and forth tighten it evenly that's
I feel them you're tight I'm just going
to stop because they're just going into
aluminum and through plastic I don't
want to crack or strip them plug the
electrical connector back in it's key to
only go on one way you'll feel it click
and push this harness back into this
spot here take our hose and put it back
in place and reinstall the clamp
I reinstall the lower cowl piece set
that right into place
I'm going to start by installing the 10
millimeter bolts back in place since the
bolt in the middle is really in there
deep and I don't want to drop it I'm
going to take some masking tape and just
stick it on the bolt head it just helps
the bolt stay in there and I'm gonna use
a driver handle with my extension it's a
little more control on it
leave this around a bit if the tape
stayed there no big deal and install
this one that's in here now I'm going to
work on the 12 millimeter bolts that
were in here before we put the plastic
trim back I'm just gonna take some glass
cleaner and just clean up the base of
the windshield and reinstall the plastic
trim don't forget to reconnect your
winch the washers because otherwise they
won't work for you it'll just be
spraying windshield washer fluid
underneath here plug the connector back
in flip this back up get line up in
place clips down the side line up just
kind of reinstall the clips one on the
outside there one in the middle one here
on the driver side now we're just going
to reinstall our under hood seal you can
see it's been contoured
and it matches up with the contour of
this in the same exact way it just
pushes right down over the plastic just
go along push it in place
thanks for watching visit us at one
arrow com for quality auto parts fast
and free shipping and the best customer
service in the industry