Let Garmin assist getting you started with your dēzl™ OTR810 or 1010
Your dēzl™ OTR 810 or 1010 will come with a vehicle suction cup with powered magnetic
mount, screw-down mount, 1” ball adapter with AMPS plate, vehicle power cable and USB-C
cable
Let’s begin by going over the device hardware
The power button is located on the side of the device and is to the left of the word
“Garmin”
This is used for powering the device on and off
Next to the power button is the USB-C port, which is used for connecting to a computer
or AC adapter with the included USB-C cable
Your microSD™ card can be inserted into the slot next to the USB-C port
Using a microSD™ card will provide additional storage space for maps and other data
Volume controls are located on the back of the device, above the speaker
The included powered mount contains a USB port for providing power to a compatible Garmin
Dash Cam™
This USB port is not designed to charge third-party devices like smartphones and tablets
The 3.5mm stereo aux out port is used for sending audio to a vehicle stereo aux in port
or wired headphones
Now that we have covered the hardware basics, let’s go over mounting and powering the
device
It is recommended to have the screw-down mount professionally installed
We will not be covering its installation in this video
Please refer to your owner’s manual for more information about installing this mount
on the dashboard
Your device also includes a 1” ball mount compatible with select third-party mounting
solutions
If you choose to use the ball mount adapter, you will need to remove the four screws currently
in the cradle
These screws will hold the ball mount adapter in place
This mounting option will not fit the included bracket
It is only intended for use in a third-party mount
Please refer to your owner’s manual for more information on using this adapter
The device is designed to receive a charge through the included magnetic powered mount
which will stick to your windshield using the attached suction cup
In this video, we will be installing the dēzl™ OTR device on the windshield
Determine where you would like to mount the device on the windshield
Then, clean the area with rubbing alcohol and a clean microfiber cloth
It is your responsibility to ensure the mounting location complies with all applicable laws
and ordinances, and does not block your view of the road during the safe operation of your
vehicle
Open the lever of the suction cup
Then, with the lever side pointing toward the top of the windshield, press the suction
cup to the windshield and fully close the lever
Next, plug the vehicle power cable into the port on the mount
The cable will click into place when fully connected
This cable is only intended to be plugged into the port on the magnetic mount
It will not fit into the USB-C port on the side of the device
If necessary, loosen the thumbscrew on the suction cup arm and the nut on the ball mount
and adjust for better viewing and operation
When you are finished adjusting, secure the mount by tightening the thumbscrew on the
suction cup arm and the nut on the ball mount
Then, place the device onto the magnetic mount
Plug the other end of the vehicle power cable into a power outlet in your vehicle
We are now ready to begin the initial setup of the device
If necessary, power the device on
Choose your locale and select “Start”
Read and accept the End User License Agreement
You will be asked for your consent to Garmin collecting, using, and sharing your device
data
Select either “Yes” or “No”
Next, you can connect to an available Wi-Fi® network
Select the network you would like to connect to
If necessary, enter a password and select “Connect”
If you do not have Wi-Fi® or do not want to connect at this time, select “Next”
You can connect to the dēzl™ app to access additional features including live traffic
updates, smart notifications and hands free calling
For more assistance, check out our videos on pairing your dēzl™ OTR device to the
dēzl™ App
Then, read and agree to the warning
Now, we will need to create a vehicle profile
Routing and navigation are calculated differently based on your vehicle profile
It is critical that you are as accurate as possible when entering your vehicle information
Select your vehicle type
In this video, we will be selecting the “Tractor” option
The following options may differ depending on which vehicle you select
Next, select your trailer configuration
Select or enter your vehicle’s maximum height, then select “Next”
Then, enter your vehicle’s maximum width
Enter the total length of your vehicle
This will include any trailers
Then, enter the total weight of your vehicle
This includes the weight of the load you are carrying
Ensure the actual weight of the vehicle has been set for the total weight on the profile,
and not the maximum possible weight of the vehicle
Setting the profile for the maximum possible weight may result in unneeded restrictions
Select any hazardous materials that you are carrying or select “None” and press “Next”
Your basic vehicle profile has been created
The wrench button is used to edit information and add additional vehicle information such
as axle weight
Ensure that the rest of the trucking profile information is accurate to avoid incorrect
routes
Press “Select” to continue to the main screen
The initial set up has now been completed
If necessary, go to an open area with a clear view of the sky to acquire satellite GPS signals
Lastly, let’s check for available updates to your device
You can use a computer and Garmin Express if necessary, but the Wi-Fi® option requires
fewer steps
To successfully complete a Wi-Fi® update, a wireless connection to home high-speed internet
is required
It is important to avoid using a mobile hotspot
Check out our Wi-Fi® connections video for tips to ensure your Wi-Fi® update is successful
From the main screen, select “Settings”
Then, select “Updates”
Your device will automatically search for available map and software updates
A blue download arrow indicates an update is available
A green check mark indicates it is up to date
Select “Download” to start all available updates
If you have not connected your device to a power source, you will now be prompted to
do so now
A description of what is included in the update will appear
Follow the on-screen prompts
These updates will take an extended period of time
You will not be able to use your device during the update
Once the update has finished downloading, you will be asked to restart the device so
it can install the update
Select “Restart and Install”
Then, select “OK”
Wait for the device to restart
Your dēzl™ OTR810 or 1010 is now ready to use
And that’s it!
Thanks for watching!
For more help, please visit support.garmin.com