hey, hello everybody
today we make a connection between 2 router wifi without using the LAN cable
Here I use TP-Link wifi
First, log into TP-Link website with ip address 192.168.0.1
192.168.0.1
Username is admin
The password is also admin
look at the connection model as above
The internet will enter the first router
The internet signal will be transmitted through the wireless environment as above in the second router wifi
The second router will receive and transmit wifi further to the end device( laptop, smartphone,..)
We will perform the TP-Link router setup to perform the above task
Zoom in a little for easy viewing
step 1: install wifi name and password
The name and password of wifi must be installed first, because it is difficult to change the WDS mode later
on the left menu select "Wireless"
Wireless Settings
In the "Wireless Network Name" section, enter the wifi name as you like here
In this example, I name it: TP-LINK_RE
Click "Save" to change the wifi name
Next is the wifi password
select "Wireless Security"
in WPA / WPA2-Personal
Enter your wifi password in the "Wireless Password" section
In this example, set the wifi password to: 1234abcd
Click "Save" to save the new wifi password
Next is to install WDS
We return to the section: Wireless Settings
select: " Enable WDS Briding "
Click "Survey" to let TP-Link find the wireless router around it
This is a list of wireless router around it. There are 9 wireless router
Here I want to connect to the wireless router named NETVN
click "Connect" in green at the end
Connect
wifi name and MAC address of the 1st wireless router
enter the wifi password of the 1st wireless router
In this example, the wifi password of the 1st router is 123456789
Click "Save" to save the installation results
Ok
will appear a notice of the results of the installation as above
section Channel at number 1
2 first and second router wifi with the same wifi channel
here is channel 1
in 11 channels
switch to "Status"
WDS Status: Run
Thus, the TP-Link wifi has successfully installed WDS mode
Step 3 is to change the ip address for the second wifi router
to avoid two router with the same address
Network
LAN
change as above
as shown above
Click "Save" to save the changes
OK
TP-Link router will restart to change ip
log in to the second wifi router with the new ip address 192.168.1.254
192.168.1.254
Login name and password remain the same, admin and admin
Login
Step 4: (Disable DHCP)
DHCP
DHCP Server: Disable
in Default Gateway enter the 1st wifi router ip address here
here the 1st wifi router ip is 192.168.1.1
So this section fills 192.168.1.1
Click "Save" to complete step 4
OK
Click "click here" in blue
reboot
ok
Wait for the router to restart automatically
login again
Login
review status
is initializing
ok already
WDS Status: RUN
wait a minute
try internet access
youtube
ok
unplug LAN cable connecting the computer and the 2rd wifi router
Test connection with wifi
TP-LINK_RE
successful connection
Check internet connection
ping 8.8.8.8
ok
Thank for watching