Hi everyone, welcome to HowFixit.
In this video guide, I'll show you how to replace the GPS module on the DJI Mavic 3
drone.
Also, You can find links to step-by-step video instructions for repairing other drone models
in the description.
To disassemble DJI Mavic 3 drone you'll need the following tools:
Screwdriver set with Phillips 1 and Torx T5 screwdriver
Plastic pry tools Tweezers
The drone is a complex device that has many screws and parts.
In the process of disassembling your Mavic 3 drone, I recommend keeping track of each
screw and part step by step, this will help to reassemble your Mavic 3 drone successfully.
And don't worry about losing any of the screws, all of them will definitely remain on the
magnetic mat.
In the description, I left links where to buy all the necessary tools.
Before you start, remove the battery.
A standard bit won't fit in this hole, so you'll need a long-tip screwdriver.
Use a plastic tool to open the drone body.
Remove the top shell cover of the drone.
Now you can replace the GPS module.
If your DJI Mavic 3 drone has a navigation system error, no GPS signal, or GPS is not
working, replacing the GPS module may resolve this issue.
In the description, I left a link where to buy a GPS module for the DJI Mavic 3 drone.
After replacing the GPS module, you need to calibrate the GPS on your drone, which you
can do in the DJI mobile app.
Let's start reassembling the drone.
The drone is assembled, and now you can check it.
I really appreciate you watching my video guides, you can ask all additional questions
regarding the repair in the comments.
Thanks for watching and have a safe flight.