hi, this video i will show you how to install macos on laptop or pc
Specifically in this video I will install macos on a dell laptop
You can use the same way to install macos on your laptop or pc
To do that you download the files as above, I have put the download link in the description of the video
There are two operating systems for you to choose from: Big Sur and Catalina
I choose to install Big Sur OS for my Dell laptop
Next you download the EFI file
As you can see there are a lot of EFI files so which one to download
Want to know which EFI file you have to download and install the CPU-Z software?
You download and install it like any other software
Cpu-z is a free software
After installing you open the cpu z software, here you will see what is your computer's processor
My processor is HASWELL but most likely your processor will be Coffee lake comet lake, ivy bridge
So you check your processor and download the appropriate efi file for your computer
These are compressed files after being downloaded, so you need to unzip them
You will need a USB stick to install Macos
You only need a USB stick up at least 4 GB in size
If your USB stick is not formatted you need to format it before copying the files
The USB stick has been formatted
Next you copy the files obtained in the previous step to the USB stick
In the Big Sur folder you copy the folder named com.apple.recovery.boot
Next is the EFI folder corresponding to your processor
After copying the folder you rename it to EFI
Here you have a USB stick that can install MacOS Big Sur operating system for the target computer
You turn off the target computer and start the installation
You connect your computer to the internet using a cable
Then boot the computer from the USB stick obtained from the previous step
Start the computer using UEFI
Let's start installing the MacOS Big Sur operating system for Dell laptops
First you format your hard drive so that it is suitable for MacOS
You show the attached hard drives in your computer
Select the hard drive you want to install the operating system on and format it
Set Schema as GUID Partion Map
Set Format to APFS
Then give your hard drive a name, this name will be used in the next step so you should remember it
Next, install the operating system on the hard drive you just formatted
You need to make sure your computer is connected to the internet
Your computer will reboot several times before the operating system installation is complete
It will take about 30 minutes to an hour to complete the installation depending on your computer hardware
At this point, you have almost finished installing the macos operating system
You set up your personal information such as language, username, password
I'll fast-forward the steps so you don't have to wait too long
Here the installation steps are similar to those on Mac computers
Next you tell the macos operating system what type of keyboard you are using
And here is the information after installing the operating system
Includes operating system name, processor, internal memory and other information
But you still have a problem to solve that if you want to use the macos operating system, the usb stick must always be plugged into the target computer.
So how to solve that problem?
This is not difficult you use the tool mountefi
I will put the link in the description or you can search it on Google
After downloading, open the file MountEFI.command
Here is a list of the hard drives attached to your computer
You choose the hard drive with the macos operating system installed
You can now access the operating system's EFI folder
Next you copy the EFI folder from the USB stick
You replace the default EFI folder of the operating system with the EFI folder on our USB stick
Having done that, turn off your computer and remove the USB stick
Because the laptop is connected to the wifi network, you can remove the cable
So it's done
I have Macos Big Sur installed on my Dell laptop
Do you want to try
Thanks for watching don't forget to like and subscribe