all right we're gonna thread this machine we're gonna thread the upper and then we're
gonna thread the bobbin and then we're gonna start sewing this spool of thread it's going
to slide onto this piece which lifts out you want the thread to go on so that it is coming
off clockwise well the end cap off slide the spool on this end cap is a little bit large
you could probably use a smaller one and then you're gonna follow there are actually numbers
on here that you can follow this thread is gonna go around this little black piece sort of slides
underneath it and come right down this slot you can see it number two here you're gonna
go under and back up right here you have this metal lever you can see the wheel on
the right the manual wheel will make that go up and down that's also make and you'll go up
and down there's a slot on the underside of it and the thread is gonna pass through and
in there from the right to the left and you'll should be able to feel or hear it kind of pop
into that as you do that it's down the front and then right here there's a little hook above the
needle and the thread is gonna slide in there and the last step is just to thread the needle
and depending on which presser foot you're using this will look a little bit different but you're
gonna slide the thread not slot in the presser foot you know thread that when you thread the
needle it goes from front to back and all the way through leave a tail at the back and then that's
your upper threading here is your bobbin for this drop in bobbin case and this is the lid to the
bobbin case and you can see it actually has some instructions printed on there so when you drop the
bobbin in you want the thread to be coming off the bottom to the left and then there's an arrow here
as well to show you the thread is gonna go around this little hook here and then come out here I'm
going just slide the lid back on and now I'm gonna use the wheel on the right hand side to lower the
needle catch the bobbin thread and pull it up so I'm gonna hold the upper thread slightly taut use
the wheel turning it toward myself to lower the needle raise the needle you can actually see that
thread pass over the bobbin here as I pull this it's gonna pull that bobbin thread up you may need
to sweep a finger or a tool under there to catch it there's your bobbin thread you can see the
bottom turning as it pulls make yourself a tail you now have both upper and lower threads yourself
a tail and pull those to the back and then you're ready I guess you can slide your fabric underneath
the presser foot and always remember to lower your presser foot before you start sewing
there's a lever toward the back it will lower and raise your presser foot and this button
right over here is going to allow you to reverse so we're going to take this fuse to just forward
when you get to the end here your needles lowered into the fabric to raise it up
you're gonna use the wheel on the right toward myself raise the needle raise the
presser foot fabric out you can use the blade on the side just snip your dress