hey guys welcome from red model today we're going to be fixing a 2016
mitsubishi lancer rear bumper so it looks like it fits from 2008 to 2017. if you
guys like this video go ahead and like and subscribe and turn on that push notification
so let's go ahead and get started so the tools you're going to be using
my wife is videotaping so she made me put it on the cart so we need a screwdriver a
socket wrench with a 10 millimeter and an extension
and then a uh paddle removal tool right here so let's push our cart this way
actually let's go on the other side first
all right so first we're gonna use this it's gonna be a screwdriver
so right here on the sides of the bumper there's these uh pushpin looking things
so it's like a screw screwdriver it's made of plastic
once that's kind of out a little bit you can use a flat head and just pry it out
tie it out like that same thing with the other one just kind of turn it
and then pry it out like that it falls down like that sometimes and then there's another
one on top i think this is a different one i think this bumper has been fixed before
so it doesn't have the other push pin but it should be a push pin like that stick it out
and right on top right here it's a 10 millimeter so we'll get a 10 millimeter
mm-hmm
we're going to do the same thing on the other side
same thing on the other side you got these like little push pins but it's a screwdriver
looking thing you just turn it like that and then you use this to take it out
so there is gonna be two more but again they're missing it and then a 10 millimeter right here
all right there you go so now we're gonna go to the bottom so if you go to the bottom right
here same thing you're gonna use one of these either a ply head or a tool like this one hold on
all right so now it's off like that
looks different
so there's gonna be a couple more of those over here
so it's gonna be a couple more of those pushpins right here
and right here but they're missing it so we have to get their store and get that later
so there's another one right here on the other side oh my god it's like equally as hard
oh this one's easier take it off
there you go put that there then we're gonna open the trunk
if y'all are from bucky's you know what that is if you're not and you come to texas right there
so
impact well i don't know
so take off that uh bolt right there
leave that in there so there's another one the other side right here
so now
all right so we're gonna go to one side we're gonna pull like that
like that go to the other side
pull like that
oh a lot of stuff and this is going to be a plug right here
if you come back here
so this light right here you can clip it like that
got a new video person
are you just pulling it out yes i'm just pulling it out held down by these clips
so right here
so it's these prongs again
and then back here you see this go ahead and push down on that
anything over here another plug
okay
all right so that's how you install a 2016 uh mitsubishi lancer rear bumper if you guys like
this video go ahead and like and subscribe to us if you guys need any parts for your vehicle
go to revemoto.com your pre-painted auto body parts source thank you guys