in this video I'm going to show you how to set up some of the various gauges
that you can access on your Dynojet power vision for harley-davidson models
so here we are in the main screen of the power vision first thing we want to do
is select our preferred units of measure we'll go to settings units and we can
change that from metric units to English units I prefer English so I'll leave
it on English we'll back out to the main screen again now to access our gauges
we'll go to the data log menu under data log settings data log theme we can
select three different themes all available gauges daytime digital gauges
or nighttime digital gauges we'll leave it on all gauges so if we go into view
our gauges this would be an example of a nighttime digital gauge panel we also
have graph gauges available various types of analog gauges this would be an
example of a daytime digital gauge and we also have a sweeping bar gauge so
we'll go ahead and set up the gauges in this panel this is for digital daytime
gauges I'll start with my gauge in the upper left hand corner I need to select
a signal for that gauge I have two types of signals that I can select vehicle and
Dynojet channel streams the only Dynojet channel streams you will ever have are
AFR or lambda if using the wideband auto tune accessory all of the other
channel streams will be under vehicle this bike does not have a tachometer so
the first gauge I want to set up is engine speed or rpm the natural low
limit for that channel stream is zero and the high limit is set to 9000 this
bike doesn't Rev past 6,200 rpm so I can actually drop this down to about 7000
under normal circumstances my readout is going to be white now behind a daytime
digital gauge it's not very visible so I want the readout to show black
if I get upwards of 6000 rpm I want the readout to turn red so I'm
going to select red as the high-limit color and I'm going to program 6000 rpm
as the high limit
so now when I'm approaching 6000 rpm my digital readout will be black but once I
reach 6000 and upwards of 6000 the numbers will change red
another good gauge to maybe set up would be battery voltage that's going to be a
vehicle signal
the natural range of battery voltage is 0 to 16 volts I want that to read out
black under normal circumstances if my battery voltage is low let's say 11 and
a half volts
I want the gates to show red
also if the battery voltage is high let's say fourteen point seven volts
I also want the gays to show red
my third gauge
I want to set up to show throttle position and that is an ECM channel
stream from the vehicle streaming into the power vision
in the natural low and high limits of that channel stream is 0% throttle to
100% throttle really needs to be no warning but I do want the gauge to show
in black lettering during all normal circumstances
and as I move the throttle you can see it increase for my fourth gauge
how about a gear indicator
the high and low limits for gear or 0 to 6 this is a six speed bike want that to
show in black
and now I have a gear indicator and now that you know how to set up your gauges
it's basically up to you to decide how you want to set up your gauges and what
you want to see