Hi guys, today I would like to show you how to configure and set up your AD-PRO-6.
So it's very simple to set up and AD-PRO-6 all you need is 5 simple steps.
The first step is going to be, to configure your computer's IP Address.
Secondly, what you want to do is,
you're going to connect physically your AD-PRO-6 to
the power supply, your breakout cable to your RJ45 Ethernet cable.
And third, what you want to do is,
you want to configure or you want to verify the network settings
on your AD-PRO-6 through the web server.
Fourth, you want to
configure your DMX softwares,
in this case we're going to be using MADRIX to configure the AD-PRO-6
and lasty, what you want to do is,
you want to connect your DMX signals.
so first what you want to do is,
you want to open up your network and sharing center.
You want to go to change adaptor settings.
make sure your wireless network connection is disabled.
and go to your local area network
on to properties and internet protocol version 4.
You want to go from automatic to Manual IP Address
so you can change it and just set it
for the 2.0.100.100 IP Address.
With the 255.0.0.0 Subnet Mask.
This is your default IP Address for the computer so the AD-PRO-6 will work.
Once you have that, what you want to do is,
you want to open up your web server.
Make sure that you have connected all of your AD-PRO-6
cables
and you want to put the default IP Address that comes on the bottom
of the AD-PRO-6.
The default IP Address for this AD-PRO-6 is,
2.0.100.113
As you can see here,
you can select device control on the web server.
And from here, you'll be able to see all the different
configurations for your AD-PRO-6.
Just verify that everything is configured to the settings that you want.
Once you've done this, what you're going to do is,
you're going to configure your DMX software.
I'm going to open up MADRIX
Here on MADRIX, what you're going to do is,
you're going to go to Preferences, Device Manager, and to the ArtNet tab.
As you can see, the ArtNet Remote is set to the computer's IP Address.
What you're going to do is,
you're going to search for a new device.
And the AD-PRO-6, since it's a very easy plug and play device,
It should appear automatically.
Now here as you can see,
the AD-PRO-6 comes out in 2 different devices
The universes 1 through 4 have 1 IP Address
and universe 5 and 6 have another virtual IP Address.
This is because ArtNet
goes in multiples of 4 universes.
So finally what you're going to do is,
once you configure your AD-PRO-6 on your DMX software,
your just going to want to turn on all of your ports.
Enable them
and configure your LED Strips
for your DMX signals
Well guys, remember the five simple steps.
which are basically:
First you want to configure your IP Address.
then you're going to connect your AD-PRO-6
Thirdly you want to configure your AD-PRO-6
with a web browser or just verify the settings.
Then you're going to configure your DMX software
And finally, what you want to do is,
connect your DMX signals and verify that your LED strips are working.
Well guys, if you have any other question, make sure you comment down below.
Remember to like and to subscribe to our channel.
and thank you for watching.