Hi everyone, welcome to HowFixit.
In this video guide, I'll show you how to replace the gimbal ribbon cable on the DJI
Mavic Mini 2 drone.
Also, You can find links to step-by-step video instructions for repairing other drone models
in the description.
To disassemble DJI Mini 2 drone you'll need the following tools:
Phillips 1 Screwdriver Tweezers
Plastic pry tools Glue gun
The drone is a complex device that has many screws and parts.
In the process of disassembling your DJI Mini 2 drone, I recommend keeping track of each
screw and part step by step, this will help to reassemble your DJI Mini 2 drone successfully.
And don't worry about losing any of the screws, all of them will definitely remain on the
magnetic mat.
In the description, I left links where to buy all the necessary tools.
Before you start, remove the battery.
Use a plastic tool to open the drone body.
Be careful with the thermal compound, it will be reused when reassembling the drone.
Some ribbon cable connectors are additionally fixed with silicone glue.
First, remove this glue, then you can safely disconnect the cable.
Carefully disconnect the cable from the mainboard.
Peel off the black tape inside the drone body.
This tape holds the mainboard inside the body of the drone.
Remove the top shell cover of
the drone.
In the description, I left a link where to buy a gimbal ribbon cable.
Now use a glue gun to fix the previously disconnected ribbon cables and wires.
The drone is assembled, and now you can check it.
I really appreciate you watching my video guides, you can ask all additional questions
regarding the repair in the comments.
Thanks for watching and have a safe flight.