♪ [music] ♪
- When the smoke clears in the end of the video, make sure you sign up for that
Vanguard giveaway.
♪ [music] ♪
- Hi, this is Jay P Morgan, standing on top of a toilet, bringing you The Slanted
Lens. Today, we're shooting a button for a commercial for Roto Hero. So, we have our
hero standing here totally in silhouette, his cape is flowing next to
him, and as the lights come on, the cape flies away, we'll see that it's Roto Hero,
plumber comin to save your day. So to make this button happen, it will just go on the
end of the commercial during the jingle. We're going to have a light behind, a 1k,
they'll have a cookaloris or a cookie. That cookie is gonna break up the light,
make shafts around our talent, make that really kind of cool look from behind.
And then we'll break the cape loose with a little special effect.
And then last of all we're gonna look at the
different smoke solutions that Rosco makes. They have three different smokes.
We're going to look at each of them, do a bit time lapse to show how long
they last and just how that smoke looks on camera. This will help us to understand a
little better about the different smokes we can use and what the application is.
So, let's get started and see what we can do.
♪[music]♪
- Let's look at how we set up our scene today. First we rigged two 12' x 12'
duvateens side by side to create a large black background. At the seam in the
middle where the two grommeted edges of the duvateens came together we turned them
away from the camera and clipped them together at the back. These blended the
two duvateens together, giving us a nice, clean seam there that will disappear when
we light our scene, especially when add our smoke.
We brought in a toilet for him to stand on.
I mean, it's rooter hero. He needs to be standing on a toilet. This is our entire
set. It's very simple. It's just a black background and a toilet that our
talent's going to stand on. The first light that we're going to set up
is the 1K. That's going to aim directly at our talent's back.
He's literally going to block it from the camera view.
This light is pivotal to everything we're going to do. It's going to determine how
the cookaloris or the cookie looks, it's going to show us the smoke we're going to
use. So, it's important to get this light up first. We now set up our Rosco smoker
and proceeded to create a cookaloris or cookie. We wanna shape that 1K that's
aimed to our talent's back. Our cookie is going to be cut out of foam cores.
Let's get that started and see what we can do.
The goal of our cookie is to create light streaks
that emanate around our talent, making him look like a super hero.
At first for our cookie, we start cutting long triangles, the points kind of coming
to the center area like the spokes on a wheel. The idea was will these are like
spokes that give these streaks that come around him. That really didn't work at
all. A more traditional method was a lot more effective. We cut just random holes
that allowed the light to pass through in some areas and not in other. Several
pieces of cookie were clamped together to create the light streaks. If we needed
more light in an area, we would cut pieces of the cookie away.
If we wanted to block the light we would just clamped or tape pieces
of cookie in place that would block the light
in that area. It really became an experimental process, where we're cutting
and taping and just trying to work to a point where we like the look of the smoke.
With our cookie creating the look that we want,
we're really ready to test the perfect smoke for the shot.
Now, I've wanted to test the three types of Rosco smoke for sometime so
this is the perfect time to do that. We need to know which one of these three
smokes is best for our shot but more importantly, I wanna have a deeper
understanding of what each of these three smokes do and how they relate to one
another. We've been running smoke for a while, testing with our cookaloris,
so we're going to first bleed all the smoke out of the machine.
Then we're going to run fluid in the machine for one minute, see what kind
of smoke that produces. We're going to run the
camera for 10 minutes and see how long the hang time is for that particular smoke.
We'll time lapse that to show you the result. This is our Rosco light fog fluid.
We're going to see what this does with our test. This fluid is a more translussive
fog effect that disperses into a haze much quicker than the original fog
fluid. It's great for just putting a nice haze in a room where you don't really see
smoke, but just gives you atmosphere. It does disperse very quickly,
so it needs to be replenished often. We now move to the Stage & Studio
fog fluid. This is thick. It's a billowy fog but it has a very short hang time.
It's good for creating fog for one single shot and then it disperses quickly so
you can move on to your next shot that's smokeless. This is also the fluid they
use to create a low lying effects indoors. That way the smoke is dispersing before it
rises up too far in the shot. So, it's a great smoke to use with yourchill box.
We are now going to test Rosco's original green fluid. It's a very thick, opaque,
and billowy smoke with a very long hang time.
Let's take a look at that and see what it does.
It could be a little overpowering to the shot sometimes. In our case, you could
almost not see the talent's face. We'll use this smoke for our shot but we'll use
bursts followed by fanning to kind of thin it out so we could see the face of
the talent very clearly. It gives you a great smoke effect thatyou can work in
for a long time.
There are great applications for each of these fog effects.
The Rosco light is great to get a shot and be able to move on.
It's also great to create atmosphere in the room and not overpower the set.
You could run the smoker on burst every few minutes and create a constant,
subtle atmosphere in the room.
The Stage & STudio is great to get heavier smoke but then it clears quickly
so you can move on. The standard green stuff is a great smoke that is thick, it
hangs in the air a long time. I love this smoke outside because it's thick and even
if there's a little bit of wind, it's gonna hold together.
So, there's a quick look at the three Rosco fog fluids.
It's time to finish our lighting.
♪ [music] ♪
We started with a 1K as a back light to create our smoke effect.
It's working with the cookie and looking great, so here's our 1K.
We'll now add a medium softbox on our talent. This is a Photoflex
medium soft box with a starlight tungsten light in it. It is boomed
overhead and feathered up just slightly so the light fall will off on the pants and
concentrate on his face. He will need to look up and keep that brim of his
hat from creating shadow on his face. Here's our softbox as the key light.
We will now add a 39 X 72 inch light panel as a fill light.
It's going to open up the shadows and make the image a little more pleasing.
Here is our lighting breakdown.
We have three lights and some great smoke.
In a very real way, smoke is a light.
It disperses the light and gives light a way to be seen.
Smoke really is our fourth light.
Here's some of the images we shot on set.
Now, we're going to move on to video.
Our biggest challenge in motion is that we need the cape flyin' in the wind and then
releases and flies out of the shot as a light comes on to reveal our plumber.
To make this cape release, we cut the ties off the cape, then we took a straight pin
and pinned the cape back on to our talent.
The head of the pin was aimed down towards the floor
and pushed up to pin the cape together. Then a piece of brown fishing line
was tied to the head of the pin. Now, as the pin is pulled down, it releases
the cape and it flies off. The cape is turned slightly to his left shoulder
so the fan can catch it and let it fall out into the camera.
To help the fan out, we add the fishing line
to pull the cape up into the air and catch the wind,
with the second fishing line to pull it down in the back.
This second line helps create almost like a sail for a boat
to catch the wind to make it billow out into the shot.
We have four people running the shot.
One releases the pin on the cape, one holds the cape up with a fishing line
from the camera left side to catch the wind and one pulls the cape down in the
back with a fishing line. After I roll the cameras, I'm going to run and turn the
light on as the cape releases and falls out of the frame.
Here's our final video piece.
♪ [music] ♪
I really enjoyed doing this shoot. I have a better understanding of the
different Rosco smokes and how to use them on set. The shot went great.
We even did a simple effect on set that we can call the flying cape effect.
I hope you found this helpful.
So keep those cameras rollin', keep on clickin'.
I hope you enjoyed our lesson today on smoke and cutting cookies, but
remember to get yourself involved in the Vanguard give away. There's many different
ways you can enter to win one of these piece of equipment from Vanguard. So go to
TheSlantedLens.com. You have until midnight on the 20th of December.
Then we're gonna give this all away for Christmas.
So go to TheSlantedLens.com and enter to win
one of these great piece of equipment from Vanguard. Also, don't forget to like
us on Facebook and subscribe on our Youtube Channel.
Keep those cameras rollin', keep on clickin'.
♪ [music] ♪