Let Garmin assist getting you started with your dēzlCam™ OTR710 truck navigator
Your dēzlCam™ OTR710 device will come with a vehicle suction cup mount, vehicle power
cable and vehicle power adapter
Let’s begin by going over the dēzlCam™ OTR710’s hardware
The power button is located in the upper right-hand corner on the back of the device and is indicated
by the power symbol
This is used for powering the device on and off
On the bottom-right of the device is the USB-C port, which is used for connecting to a power
outlet in the vehicle with the included vehicle power cable
This port is also used for connecting to a computer or AC adapter
There are two microSD™ memory card slots on the bottom edge of the device
The slot on the left is for adding storage space for maps and data
The slot on the right is for storing video footage from the dash cam
A 16 GB memory card will come pre-installed in the camera slot
You can use a compatible memory card with a storage capacity up to 256 GB for either
slot
The camera can be moved horizontally to provide an optimal viewing angle while mounted
Now that we have covered the hardware basics, let’s go over mounting and powering the
device
Determine where you would like to mount the device on the windshield
Choose a location that provides the dash camera with a clear view of the road
Then, clean the area with rubbing alcohol and a microfiber cloth
It is your responsibility to ensure the mounting location complies with all applicable laws
and ordinances, and does not block your view of the road during the safe operation of your
vehicle
Press the suction cup to the windshield and flip the lever back toward the windshield
to secure it
Then, press the mount onto the suction cup ball until it snaps into place
Next, plug the vehicle power cable into the USB-C port on the device
Plug the other end of the vehicle power cable into the vehicle power adapter
Then, plug the vehicle power adapter into a power outlet in your vehicle
Fit the tab on the bottom of the mount into the slot on the back of the device above the
memory card slots
Press the device into the mount until it clicks
Adjust the device for better viewing and operation
We are now ready to begin the initial setup of the device
Choose your locale and select “OK”
Then, choose a language and select “OK”
Read and accept the End User License Agreement
You can connect to the dēzl™ smartphone app to access additional features including
the Garmin Vault, live traffic updates and hands-free calling
For more assistance, check out our videos on pairing your dēzlCam™ OTR710 device
to the dēzl™ App
Next, you can connect to an available Wi-Fi® network
Select the network you would like to connect to
If necessary, enter a password and select “Done”
You will be asked for your consent to Garmin collecting, using and sharing your device
data
Select either “Yes” or “No”
Select “Email Address” and enter your email to register your device
Select “Offers and Promotions” if you want to receive promotional emails from Garmin
Then, select “Continue”
Read and agree to the warning
Now, we will need to create a vehicle profile
Routing and navigation are calculated differently based on your vehicle profile
It is critical that you are as accurate as possible when entering your vehicle information
Select your vehicle type
In this video, we will be selecting the “Tractor” option
The following options may differ depending on which vehicle you select
Next, select your trailer configuration
Select or enter your vehicle’s maximum height, then select “Next”
Then, enter your vehicle’s maximum width
Enter the total length of your vehicle
This will include any trailers
Then, enter the total weight of your vehicle
This includes the weight of the load you are carrying
Ensure the actual weight of the vehicle has been set for the total weight on the profile,
and not the maximum possible weight of the vehicle
Setting the profile for the maximum possible weight may result in unneeded restrictions
Select any hazardous materials that you are carrying, or select “None” and press “Next”
Your basic vehicle profile has been created
The wrench button is used to edit information and add additional vehicle information such
as axle weight
Ensure that the rest of the trucking profile information is accurate to avoid incorrect
routes
Press “Select” to continue
Next, select the horizontal camera location of your device on the windshield
Then, select the height of your vehicle
Select “OK” to proceed to the camera adjustment screen
Make sure the camera is pointed straight ahead and provides optimal view of the front of
the vehicle
Adjust the camera as needed, then select “Done”
If you would like the dash cam to begin recording automatically each time the device starts,
select “Yes”
Otherwise, select “No”
Select the pieces of information you would like the dash cam to record along with the
video footage
Select “Save” to finish the dash cam setup
The initial setup has now been completed
If necessary, go to an open area with a clear view of the sky to acquire satellite GPS signals
Lastly, let’s check for available updates to your device
You can use a computer and the Garmin Express software if necessary, but the Wi-fi® option
requires fewer steps
To successfully complete a Wi-Fi® update, a wireless connection to home high-speed internet
is required
It is important to avoid using a mobile hotspot
Check out our Wi-Fi® connections video for tips to ensure your Wi-Fi® update is successful
From the main screen, select “Settings”
Then, select “Updates”
Your device will automatically search for available map and software updates
A blue download arrow indicates an update is available
A green check mark indicates it is up to date
Select “Install All” to start all available updates
Read the important installation notes and select “Start”
If you have not connected your device to a power source, you will now be prompted to
do so
Follow the on-screen prompts
These updates will take an extended period of time
You will not be able to use your device during the update
Once the update has finished downloading, wait for the device to restart
Your dēzlCam™ OTR710 is now ready to use
And that’s it!
Thanks for watching!
For more help please visit support.garmin.com