Hi guys, my name is Jorge again here with SIRS Electronics
and today I am going to explain to you
how to program the Multi-Zone RF Controllers
ok, so what I'm going to do is I am gonna
program several RF recievers
with one single transmitter
ok these two strips are connected
to this one, so this is going to be my zone one
this is my zone two, zone three
and zone four
ok what you want to start with is
as soon as you plug in your DC plug,
if you don't have a DC plug, you connect it straight with bare wire
as soon as you plug it in,
you are going to want to select your zone
within three seconds, select the on button
on the zone that you are going to want it
it's going to flash or blink about three times
indicating that, that zone has been programmed
ok, now disconnect it and I am going to do the same thing for zone two
and within three seconds I select zone two that I want to turn on
ok, now I have that one on zone two
Same thing for zone three, within three seconds
I connect that one
and finally for zone four I can do the same thing
ok, and now while I have all of my zones turned on
I can pretty much select each zone
So if you want to start by using zone one only
you click on the on button to select that one
you can change it with the color wheel
You can do different effects, so I am going to start
do a color chase by
fading in and out each color individually
Now I am going to go to zone two,
I'm going to also change the effect
to blinking different colors
zone three
maybe I want a stationary color like blue
and zone four
I am going to run another program
Lets say something like that
Okay, as you can see right now,
each zone is doing a different thing
and that's the point of the Multi-Zone, where you can control
different zones or different rooms with one single transceiver
Okay, now lets work on unlinking them or deprogramming them
It's basically the same thing
but as soon as you connect them
what you want to do is click
or tap on the button several times
until you see them blink on and off several times as well
So if I connected, within three seconds
I'm going to tap it several times
and as you can see, it's going to blink
maybe about six to eight times
indicating that, that zone has been unlinked
or deprogrammed
and the same thing I am going to do for all my other zones
I'm going to tap them really quick
I'm going to do the same thing for this one
and the same thing for my last zone
okay, now I have unlinked them all
and what I want to do is, I want to link
several receivers to one single zone
Lets start with zone one
so I connect that
and then I start by linking that one to my zone one
and then lets say I want to do this one as well to my zone one
and lastly this one to my zone one
so technically I have three receivers
all to the same zone, which is my zone one
and now I can turn them on red,
green, blue
I can make them change colors individually
or whatever I want
and the good thing about this, is one single zone can control
unlimited amount of receivers
and since you have four zones
I mean the limitations are basically on, what your applications need to be
okay guys, well I hope you enjoyed this video
If you have any questions, make sure you comment down below or give us a call
Remember to like and subscribe to us and thank you for watching
(music)