all right guys Kirk and Jay here with Kirk Giordano plastering, today I want to go over
this Bosch bulldog what is it it's a hammer chisel it drills it does everything we were
at a jobsite the other day and they were supposed to break out everything I'm going to show you how
to break out in this video too but I'm going to explain something else - okay this is a rotor
hammer it's basically to break out anything or you put your let me start off like this you see
this drill bit here this is to drilling concrete you turn this on a certain way and it vibrates
and spins so say if you were doing break out that that's straight break out but if you were
trying to drill in it would spin and hammer at the same time that's to put holes in concrete
or stuck or stuff you use these guys here the the bits that come with this guys are usually a
pointer to break stucco out don't use a pointer we just left a job yesterday and he had a guy
spend two to three days and he used a pointer what did that pointer do well it punctured the
paper he's got ten thousand holes in the paper so I said I hate to tell you this but you've got
to start again and go three more inches back or a couple more inches back in order to get some
paper now these pointers are good for something I just throw them away because I have no use for
them you show you something else while we're on these Bulldogs now this one is its inch and
a half it won't work either trust me I've thrown a lot of them away because I just can't use them
I buy these in the case they're usually about 200 bucks Lowe's Home Depot about 200 bucks and
all the hardware stores I've seen them as high as 380 at the professional plastering material
yards don't figure I've been using this for Oh 15 years or so when I went into my last material you
artists today dude I notice you guys got the Bosch how come he says well people are asking
about it I said they're probably watching that 700 800 videos we have because I show this often
but what I haven't showed is what I'm about to tell you guys here's okay we start off with a
half inch bit like this guy right here it comes just brand new in the box like this let me pull
this apart because I'm going to show you something guys we've been doing this so long that I take it
for granted this one's a half inch bit this was a half inch bit it almost looks like a pointer now
because we've used it to death so when you use it over where it's no longer effective take it
out and it really takes about it two to three years to wear one of those out what I'll do is
here's a half inch bit but you can also go to Home Depot go to Lowe's they have these bits right here
they're like 15 buck this is a self sharpening a bit what's that mean I don't know but it works
well it's got a half inch bit so you pull the head down stick these guys in lock it once it's
locked won't come out and so when you go through up got it on spin when you go to hammer this out
now here's the thing guys you don't want to start way over here you want to start a little bit out
of time I'll show you we're going to stand back up here and what I okay guys I've got about ten other
heavy-duty hammer chisels but they're so heavy that by 15 minutes and I'm as strong as the next
guy but in 15 minutes you're like ah struggling man because it's just too heavy this one is light
what about the air ones that bounce all over the place now you get it for 20 30 bucks in they're
throwaways but they bounce everywhere so you got no coordination with them and the other big ones
I'm not going to name names because I don't want anybody yelling at me say hey what he's saying my
thing is too heavy for but all the bigger ones that are twice this size if you do this for say
three to four hours I'll guarantee you just like me you get tired because they're too heavy this
little light guy here you just hold it here here's a tip when breaking out guys see we want some
clean paper like this you start close to it and you work your way back and know I'm not wearing a
mask because I'm trying to explain something here what's in this stuff I don't know could be silica
dust that's cancerous it could be lead could be asbestos it could be a hundred other different
things and none of them are good to inhale so wear glasses have yourself a good respirator
I'm talking about a good one not none of that paper crap stuff a really good one because dust
and I've been doing this for over 30 years so I'm not going to worry about a little dust at me right
now so here's what you do guys you take it and you start from the edge if you start we're over
here you can have big rocks and clinkers so you don't want that here's what you want to do guys
look at our time and pull back
you get the idea guys and here's something else too why do we use it uh I mean we're using a
Bosch Bulldog here because it's uh hay concrete everywhere I got a habit of just sticking it in
the dirt I stick it in the dirt come on where's the dirt and just let it sit because I don't like
to get dirt in the motor but kid why not use a hammer guys well if you don't have a Bosch
Bulldog and you just got a little area use a hammer but usually a hammer will push the stucco
into already deteriorated paper if that paper is not deteriorated it's going to get jacked up when
you're using brute force yeah you take a hammer and you start pounding this stuff yeah you can it
it just destroys it I used to use a hammer over 30 years ago before I didn't have tools but you
do more damage than good guys so get yourself the proper tools and when the bit goes bad fix it and
that was from my buddy who his guys spent three or four days and they got to spend another two
or three more because you don't you don't want the membrane that's the whole idea is to get
the new paper over the existing paper and the new wire to tie in with the existing wire why
do you tie that in so you don't get a perimeter crack right there while you put new paper over
existing paper common sense that doesn't leak anyway guys I thought I'd point out a couple
things like that because I noticed they're selling these at material yards and I thought man it must
be because all our videos were showing people in there asking for them my name is Kirk Jason on
the camera we thank you guys for watching it as usual you have questions we have answers we'll
see on the next one once again folks we thank you for watching and I really enjoy all your comments
if you guys like this video please click the like button down below and also if you enjoy
what we do subscribe to our channel so we can keep making these videos for you my name is Kirk
and Jay we thank you for watching and from the entire giordano family we'll see on the next one