hi there everyone welcome back to infinity drones
today i've got some amazing news for you guys we are going to unlock my mavic 2 pro
to remove the no-fly zones as well as the altitude limits and enable fcc boost mode
in this new mod this new version is absolutely exciting because it supports almost all
dji drones so if you guys want to and you guys were ready to apply the mod all you need to do is
just simply go to the drone hacks website please make sure it's the drone hacks by think awesome
once you've opened the site you'll have a couple of options to choose from obviously all these
unlocks are going to be at your own risk so if you are going to proceed with this please make
sure you understand and fully agree to all the terms now in our scenario i would like
to mod my dgi drone the first thing you'd like to do is just maybe go check the bird map out
the bird map is going to show you what drones are supported and what you need if you don't
understand there are options where you can click on which license do you need and so forth
in my scenario i've already done this previously on another drone so i'm going to do this now on
my personal drone as well so i'm going to click on the mavic 2 zoom and pro option and you're
going to see all the options available now this new mod is absolutely amazing because it runs
on the latest firmware it supports all of this so where you see the recommended firmware you
can now ignore this and you can just click on the latest firmware on the bottom of the page
and it will show you what mods are available so in this case you can see that the free or just
the dronex application itself is going to allow you to flash your firmware modify your parameters
so you can increase your speed and so forth i'll show you how to do that as well and if you'd like
to enable fcc mode this is obviously to increase your range of signal strength if you're outside of
the us but there's also a boost option so if you are in the us you can still enable fcc boost which
will increase the output of your remote or your signal even better even more so the last one the
one i'm most excited about is we can now remove the altitude limit as well as the no-fly zones
using the certificate so you need to have the correct license for this one now if you do not
have a drone hacks account i would simply click on my account and then you could go to the sign up
option and you could register your email address now this is where you guys need to think ahead
is the drone something you're going to keep for a long period of time are you in the process of
maybe thinking about upgrading your drone and so forth because if you are i actually recommend
creating a separate gmail account for each drone that you're going to mod on the dronex application
or by purchase or purchase a license for and the reason for this is if you sell the drone
you can now give the gmail account or whatever account you've created with the drone because
the license is linked to that login details so in this case i've already got an account on my
name so i can just log in i can go view my profile or i can purchase more licenses but if you are new
to this i would recommend signing up and getting a email account that is dedicated for that drone
purely because if you ever want to get rid of the drone you can then give the account with and the
person purchasing the drone can then get all the benefits of the dronex license that you've already
purchased because the license is linked to the drone serial number it's not transferable between
one drone and another so in this case i all you need to do is you can go look at the pricing
options in this case i've done up anything in my shopping cart but if you have already selected
maybe a pricing option for yourself so if i'd like to go and purchase a license i can now go
and buy a license now if you want to buy a license obviously you're going to have a few
options but we want to obviously upgrade my dji mavic 2 pro so in this case i can go choose my
bird which is my mavic 2 pro and i can go buy a regular license if you click on the license
it goes to the whole process of going to the cart where you can make payment my internet connection
is unfortunately not fantastic so as you can see here the regular license is now put in my
cart and i can proceed proceed to my checkout now if you do make payment you'll just get an email
and it's just going to tell you that you have purchased your license you're not getting anything
as you can see there's no shipping costs or anything like that included because it's just
linked to your account that you've registered with so make sure once again that you are signed up
so the account gets linked to the correct email address now once you've done that go to the
download page which you can select whichever operating system you're working with currently
it supports windows and linux you can just click on the button on the bottom and start
downloading the application and it's a very easy to use application tool now if you are unsure of
how the whole process works you can always go to the options on the screen at the top here you can
go to the unlock certificate it'll explain the whole process for you step by step how to do it
and proceed accordingly so if you do go into the dji go 4 app for instance and you find that you
don't have your certificate enabled you can just go to get on manually as well because sometimes
it doesn't always enable automatically but i'll go through the process but later for you as well
now you can also like i said go take a look at the what options are available in the hack and
the unlock certificate it explains it quite well so for those of you guys who would like to have
some further reading especially for those of you guys that aren't 100 sure what fcc boost
is um but further well let's continue to do the mod as you can see i've now completed my download
for the dronex application and if you want you can just open it over there i've already got quite a
few downloaded from previous experiences so i'm just going to open my drone hacks account my login
details everything has already been inputted so it's going to be easier for me just to proceed
so what you can do so long is once the dronehex application has now opened up you can type in
your details and it is then going to log you into the application but while you do this you
might as well turn on your drone so in my case i'm just going to switch on my drone quickly
and you're going gonna see that drone hacks will detect it pretty soon now once it's detected
you'll see on the dronex screen itself it's gonna say it's device connected and then we can just
click and check the firmware of the drone itself so if you click on the welcome page you'll see the
version that your firmware is currently on now i already have a license associated with my drone
so when i connect it up dronax will automatically detect my license and it will start loading the
settings available for me now if you do not have a license associated with your drone a little pop-up
is going to appear and it's going to show you that or ask you to link the existing license in
your account that's not assigned to a drone to this drone you have then the option to click ok
obviously cancel it naturally you would most likely assign that license to your drone
now once the license is assigned to your drone you're going to see the drone hacks is going to
say that the license is valid for the drone and it's going to start loading the exploits that are
available now this can take some time depending on your internet connection so you just have to wait
for drone hacks to complete loading the exploits and then log you into the application itself
once it's logged you into the application it's going to start loading all the exports again
and just make sure that you are able to make changes to your drone
as you can see i've now logged in i can click on the hack parameter option and you can see that my
drone is currently in fcc mode now i would like to switch over to fcc boost mode all i have to
do is select the box click the apply button and drone hacks will do the rest as simple as that
all we need to do now is just to wait for the mod to be applied to the drone once it's completed
dronax can have a little pop-up to say it's successful and then which you can just restart
the room so as you can see we're just waiting now for it to complete it can take a minute or two
but the pop-up should pop up any second now once it's complete you can see the pop-up there
all you do is click the ok button restart your drone and then you are good to go you can check
in the app itself but it would be easier just to restart the drone reconnect it to the pc and then
go into the hack parameter option and check if the boost mode option has been selected as you can see
i'm just connecting my drone going to the hacks option now just waiting for drone hacks to detect
everything remember your internet speed will determine how long the exploits will take to load
but once that's done all we want to check is if the boost mode option has been
enabled on my drone if it has then the drone has been successfully modded to fcc boost mode
and we can proceed to the no fly zone mod now sometimes you're going to get an error message
and you're going to see it pop up any second now that is because the internet speed is not great
the best thing to do here is just to click ok button restart the drone reconnect everything
and then try again when the drone gets connected the loading exploit phase happens automatically
now if you don't restart your drone you might get stuck on the loading exploit page because
it's errored out and it doesn't know it needs to refresh so simply just restart your drone it will
automatically restart the loading exploit page again now in my scenario unfortunately my internet
is very bad so i had to go through the process two times luckily i succeeded on the second attempt as
you can see i am now in boost mode that means that the fcc boost mode mod was successful and i can
proceed now to install the dronehack certificate remember the dronag certificate will remove the
altitude limits as well as the no-fly zones so once again just as easy as the fcc mod just
click the install button and once you click it a little pop-up screen to appear for you to agree to
naturally that is a place where you need to accept responsibility because you could
be breaking laws in your country remember just because you've removed the limits does not mean
you are flying illegally artel parrot none of those drones have any limits but if you remove
the limits you can potentially be breaking the laws in your country so please fly responsibly
and do not break the laws in your country now once a certificate has successfully installed
a little pop-up's going to appear to tell you that you should not be upgrading your application
nor your firmware if you do the possibility that the certificate will stop working does exist
now all you need to do is restart your drone and you can then proceed to check or go for a
test flight now remember if you don't want the mod anymore you can simply update the firmware on your
drone or you can go into the dronex application go to the hex firmware option and click the
remove option then it will remove the altitude limit as well as the no-fly zone certificate
now let me quickly jump over and show you guys how to change the parameters of your drone
that is if you want to make it a bit faster or a bit slower it's completely up to you all you do is
switch over to the hack parameters tab and it will then load the exploits available for your drone
it's just going to check the parameters for you so it's just checking what is your current settings
and then you can make changes in this case we can make changes to sport mode as well as to normal p
mode unfortunately we can't make changes to tripod mode or cinematic mode here but if you do
go to the advanced options on the right side that will give you a few more options so on the screen
if you want to you can change a few of the options over here so if i want to i can make my
the send speed faster or my ascent speed faster and if i make anything over here and i'm not
happy with it all i can do is just click on the reset button again and i can then just restore to
the default settings so there's no real risk here if you want to play around with it do
please don't make massive changes like i've just done just click the reset button i would make five
degree changes maybe at a time if you want to do something a bit more advanced you can click
on the advanced parameter option this could be a few more options for you now you can search
for something in this case let's just search for tripod mode and i can look at all the settings
that are associated with that now please only make changes here if you know what you are doing
if you don't leave this alone you can really mess something up here if you make a change
here and you are uncomfortable and you want to go back to the previous settings you can just
close the screen click on the set default values and it will restore to the previous configuration
now if you guys want more in-depth knowledge of the drone alex application i really do recommend
going to the dronex website reading all of the content there or go to the fly my mavic youtube
page good friend of mine he has a whole tutorial on how the dronex application works so simply go
to to fly my mavic click the subscribe button and follow the content that he's making there
he's really up to date and he works very closely with the developer of the dronex application
well done guys you have now modded your drone all that's really left is for you to go
and test it out so what you need to do just go into the go4 application or the fly app
and then you can go check if your certificate is enabled or not so log into the go for app
go to the top three buttons on the top right and you're going to scroll down to the bottom where
you can see the three dots at the bottom of the page now usually it will open at the drone icon on
the top left simply tap on the three dots at the bottom scroll down we can see unlocking license
geo unlocking on the dji flyer app and then you can take a look at what certificates are on your
drone currently in my case i've got a few that's from the app itself but i'm more concerned about
the one that's on the aircraft itself so the drone hacks one remember was loaded onto the aircraft
so just tap on the aircraft side and you're gonna see that the drone hacks certificate is enabled if
it's not enabled so you tap on the certificate to turn it on and off now remember if you turn it on
again you're gonna have to accept the liability questions so just tap on the buttons and then
proceed now if you are flying you cannot disable this while in flight but this is pretty cool if
you want to turn off the certificate and enable the no-fly zones if you are in an area where you
are maybe more sensitive towards that but if you want to turn it on you can simply come back in
here tap the certificate button and it will then be enabled as you can see that it's valid till
2030 so it's going to be there for a long long time remember once again do not update the app
and do not update the firmware on the drone if you do you will lose the mod now thank you guys
for sticking around till the end of the video please consider to click the like and subscribe
button as it really helps out the channel thank you for watching see you on the next one
you