good morning folks Kirk here with Kirk Giordano plastering, and Jason Giordano doing the filming
yin also one of mine blasters we're going to do here today is interior finish we've got a lot of
areas in this large it was two rooms and they turned it into one room down so now it's kind
of a master suite a lot of areas where there's original sheetrock right here and then there's
new sheetrock so what we're going to do is tie all it they don't have the baseboards or 1x4
is up yet which is good first thing always to cover the floors they got beautiful hardwood
floors so we covered it all next thing is to apply the fiber mesh tape over all the cracks
we've got that I always apply this first then I put the bonding agent over second we're going to
apply a twenty-minute mud here which it's going to take two coats because of the existing she
bought to the new so I'm going to start after I put the bonding agent which again we're using
weld Creek now use these little baby brushes for plastering - these guys are what I call
throwers they're buff to three dollars each but it beats a forty dollar brush or a $50
brush because it hits the corners when it's all classic real tight so kind of important
little things like ever-important another thing important is always covered your electrical
receptacles because plaster will get in there real nightmare to get it out so we are out of
stage right now where I just showing you how to at least get started prior to the application of
the first go to stucco or plaster we're going to plaster all this first coat after it starts
to set we're going to use this bottle here which sprays it with water and put the second coat on
then we also again spray this and Steelheart trout let's take it after doing it thank you
alright guys this is the first coat what I like to do is do the best possible finish you can on
go that makes the second goes on here I'm just in a swimming pool trial know it no lines I use
the square trial and lead line so we start here our feet and we come on up all the way up to the
top all the way down that give us a first finish and of course when we come to these guys here you
can stretch this EPS Campbell ladder I can reach this up out of my stretching one more time throw
it all the way to bottom oh yeah like it and come down on it okay we're on a second coat first time
we've already spread out we up your drive we went sideways and pulled all the high spots off this
cone here is we don't have to go as it because we've already covered all the mesh tape and put
a full first coconut first coat in some areas with a quarter inch so now we just doubling it
up but we're more put on here come down go up in the bottom go up same way come on down like
that and soon enough in about Oh 15 minutes we're going to start finishing this wall and when I say
finishing it I just mean we're going to take water and spray hard steel trolley and it'll be kind of
salute finished well folks today you have it to coat system plastering using 20 minute but it
beeps three codes of taken mud what's with Sandy and taken my dust all over the rooms this we did
it in eight hours it's a pretty big room 17 feet by 20 but it's a pretty big room we're done we're
out of here no mass no dust thank you very much for watching this boring video and remember you
too can do it yourself but if you can't call me Kirk, cheer it up to have a nice day thank you.