Hey guys, in this video I want to show you some radical new findings about how the ancient
Chennakeshava temple was really built.
This ancient technology is completely different and mind boggling, so make sure to watch till
the end of this video.
Here you can see that several statues are missing.
Archeology reports say that at least 94 statues are missing from the temple.
People stole these priceless statues and sold them to foreign collectors.
But this is where we can find some crazy details.
If you see here, you can see that the statues have been removed, and you can see multiple
holes at the top.
But if you look closely, you can also see the holes in the bottom.
And on the very right, you can see a statue that has not been removed.
What does this mean?
This means that statue and the stone behind are not made of one stone block.
When we look at this temple wall, you can see a bunch of carvings, we normally assume,
these are all carvings etched on top of the giant blocks that make up the wall.
But no, ancient builders carved the statues separately and then fixed them on the walls,
just like how we wall mount TVs today.
The statues ae simply mounted on these slots using a variety of joints.
But let’s take an even closer look, we can see how the statues have been mounted on these
holes.
These statues are small, only about 6 to 9 inches tall, but look behind them.
Each statue has atleast 2 cylindrical extensions, 2 rods, I mean 2 stone cylinders at the back,
which were then plugged into the holes on the wall.
This is actually a brilliant engineering technology and is very hard to remove or dismantle.
But that was not enough, so in addition to the 2 joints in the middle, there were also
joints made at the top and bottom, making it nearly impossible to understand that the
statues were made independently and then joined to the wall.
There are tube like extensions joining the statue and the wall, these are actually plugged
in to the back, but the mount is so perfect, everything looks like one piece.
The same type of joint is also found on the top, and it is very difficult to even explain
it, and it is nearly impossible to engineer such joints in stone, today.
But when I analyzed this even closer, this gets even more complicated.
Let’s focus on this area, you can see a row of small tower like carvings.
Normally, you would have assumed that this entire area was made of one stone block, but
now you may understand that each tower, with that circular symbol, and the 2 animals, are
made of one stone, and then mounted to the back.
So, these three towers are made of three different stone blocks.
I thought the same, but this is wrong.
From the front view nothing is visible, but when you see things from the side, the circular
thing is actually another separate stone block, mounted on this tower.
The mounting connectors are clearly visible.
Each animal is also an individual stone block, attached to the tower.
This is very hard to believe right, because look at this area, where the two animals meet,
it looks like one stone, but these are 2 different stone blocks.
And if you look carefully, there is a connector at the back, that has been precisely set up
between them, the alignment is done with insane precision.
My point is, each tower is not made of one stone, it is made of at least 4 different
interlocking stone blocks.
And maybe this is how the small statues were also attached to the rotating pillar.
I already showed you that we can put our hands inside, at the back of the carvings in another video.
Experts are breaking their heads, thinking about how did ancient builders carve these things?
It would make it much simpler if they made the small statues separately and then mounted
them on the pillar.
In fact, now it makes more sense why they used these extensions, they are the connectors
to mount these small statues to the pillar.
I think archeologists have made a big mistake in thinking that, wow, how did they make these
tiny carvings with large empty spaces at the back?
This is based on the assumption that the whole pillar or at least a major portion of it is
made of one stone.
While the reality is, this empty space is absolutely necessary, so they could mount
these separate stone blocks, and the space will also provide the necessary tolerance,
if they ever had to dismantle them.
When we look at a large statue, like this Madhanika, we realize that it was made separately
and then mounted in place.
We don’t think, the statue, the wall, the ceiling is all of the same stone block, right?
Why?
Because this is the technology that exists today, and we always subconsciously connect
any technology with today’s technology.
Today, if you buy a stone or a wooden statue or even a tiny figurine, you think it is a
single piece.
Because we are used to today’s technology.
But ancient builders must have taken it to an even more intricate, micro level.
So just like how we understand that a large statue is only a part of the entire structure,
they broke down the statue itself, into many different parts.
So, the statues are also made of many smaller stone blocks and then assembled together.
And their assembling is so perfect, it has been fooling us for many centuries.
Don’t be distracted by her beauty, focus on left shoulder, see that joint?
Nobody knows this, because nobody understood this until now.
But the most important information of this ancient technology is hiding inside the temple,
in this carving of Narasimha, we have to take a close look at the details.
Lord Narasimha is a half man, half lion deity, although in this temple, his face looks a
little different from a typical lion.
He is wearing a helmet or a crown and you can see the diamond in the center there, and
you think he is pulling a rope in his hands, but if you look carefully, it is not a rope,
it is the intestines of a demon, who is lying on his lap.
He is killing the demon with his bare hands by disembowelling him, and he basically going
to wear his intestines as a garland.
There are interesting details about how this demon is pinned by Narasimha, for example,
he has put his leg in such a position that the demon cannot move his hand and use his
shield.
And Narasimha is also pressing a spear on the demon’s helmet, you can see that the
spear is firmly placed on his helmet.
And of course, if you are not a Hindu, you may think this is pointless, why put a spear
on his helmet, putting it through his face will do the job, will kill the demon, right?
No, ancient Hindu texts say that this demon cannot be killed by any weapon, or any man,
or any animal, on the ground, or in the air.
This is why Lord Narasimha had to appear in this form, and kill the demon on his lap,
with his claws.
Of course, he is shown as a very powerful deity with 10 hands, in one hand he is holding
a conch, in another he is holding a spear, the next hand has a sword, and these 2 hands
are tearing this demon’s stomach, and this hand is holding a ring or chakra, and another
one is holding an arrow, and above that, you can see another hand with a mace or a bludgeon,
and the last 2 hands are holding the intestines, and the hands are shown with secret details
about an ancient hand signal, I am sure some of you will even claim this is an illuminati
symbol.
Now, please allow me to zoom out so I can show you where the Narasimha is actually located.
The entire carving you just saw, is only about 3 or 4 inches wide, and it is at the end of
a cylinder in the center of this ceiling block.
Imagine carving all these details in that small area, it is a miracle in itself, but
this is not what we are focusing on.
Archeologists have confirmed something shocking about this carving.
A few years ago, when they tried to renovate this, they accidentally found out that the
cylinder moved, it was turning like a screw, when they turned it more, they were able to
remove this cylinder separately like a modern bolt.
You see, it has 4 sides or 4 facets of an octagon.
The other 4 sides are on the other side, and yes, even today, you can unscrew this like
a bolt and remove it.
Until then, archeologists had always thought that the entire ceiling is made of one solid
stone block.
But when they removed this center piece, they found that, there were other stone blocks
interlocked inside, and when they started to remove them one by one, they were able
to completely dismantle the entire ceiling.
Guess how many pieces make up this area alone?
48 pieces, yes 48 small stone blocks in various shapes and sizes.
No mortar, no cement, just stone blocks of various sizes and shapes interlocked using
a variety of joints.
If you work with machines, you know how complex it is, to make just two- or three-pieces interlock
with one another.
Imagine making 48 such stone pieces, on the ceiling to be locked in place against gravity,
and then screw a master bolt to lock everything, and all this was done more than 900 years
ago.
And when you look at the large-scale statues and pillars in this temple, you may think,
aha, this simplifies everything, now I understand how the ancient builders could build the Chennakeshava
temple so well.
But this actually increases the complexity of the construction: Now what do I mean by
that right?
Let’s say, hypothetically, initially you thought that this temple is made of 10,000
stone blocks.
But now we know that each of these blocks are at least made of 10 smaller stone blocks.
That means at least 100,000 stone blocks were used.
Let’s take a car, for example a tesla model 3, which also coincidentally has 10,000 unique
parts.
Now if Tomorrow, Elon Musk announced another tesla model, with 100,000 unique parts, the
world will go crazy, because he just increased the complexity of building that car by 10
times.
Of course, Elon Musk is not gonna do that because he is not crazy, but the ancient builders
were.
And this is exactly what we have just discovered here.
This video has just revealed to you that this temple was made with a tenfold advanced
technology than what we thought before.
But wait a minute, what if this ceiling was just a special feature?
I mean what if this ceiling is an exception, and not an example?
I mean, let’s face it, are all these areas made of tiny little stone blocks?
The majority of the walls are just covered with flowers, leaves and creepers.
It appears to be made of just one or two stone blocks, right?
But let’s take a closer look at these plants.
Inside every leaf, there is a deity carved.
Even after so much corrosion and destruction, you can still see them, and identify these
gods.
Each leaf is less than one inch tall, but you can see that each leaf is hanging out,
in a 3d fashion.
But if you start to observe closely at the destroyed leaves, you can see the top connectors
and the bottom connectors as well.
Yes, every leaf is a separate stone block attached to the background.
It is clear that every leaf was made separately and then attached to the background.
So, you can imagine how many tiny stone blocks would be required to make up one square foot
of area.
One thing to note here is that, all this binding material you see, and you will see a lot of
these cement or concrete patches in many places.
According to the tour guides, this is all new, all this was done by the archeology department,
to make sure things don’t collapse.
The original temple was built with no binding materials at all, just interlocking stone
technology using various joints.
So, we have the ceiling that’s made of 48 pieces, and we have tiny stone blocks as well
confirming that Chennakeshava temple uses multiple small stone blocks in every square
foot area.
What does this actually mean?
This means that this temple was built with a very unique technology, for every
square foot area of this temple, there is at least 10 different stone blocks, it could
be much more than 10, but I will keep it to a lower estimate.
Now, I am going to be very very conservative and leave out nearly 80 % of the structures
in this temple complex, I will not consider the tower, the compound wall, I am not going
to include this temple, this temple, this temple, I am only going to take this main
temple or the main structure.
According to Wikipedia, the area of this main structure alone is 178 feet by 156 feet.
If you look at this temple, you can see that nearly the entire height is full of various
carvings, and it will be easily 20 feet tall.
And remember this is not a solid cube, you have inner walls, outer walls, multiple chambers
and everything is in many folds, increasing the surface area.
But even if we ignore all this extra area, and we take it as a simple solid cuboid, the
surface area will come to approximately 68,000 square feet.
Since every square foot of this temple is made of at least 10 stone blocks, they would
have needed atleast 680,000 stone blocks.
Today just imagine assembling 680,000 lego blocks to build something, that would be impossible.
And these are not just readymade blocks, right?
Every stone has to be measured, cut into perfect shape for interlocking with other blocks,
not to mention the time to create exquisite details in carvings.
And to assemble, 680,000 actual stone blocks without any binding material is just mind
boggling.
This seems humanly impossible; I mean where did this knowledge of ancient technology
come from?
India is truly the land of ancient technology, especially in architecture and engineering.
On one hand we have the Kailasa temple in Ellora caves, which is made of just one solid rock.
On the other hand, we have the Chennakeshava temple which is made of at least 680,000 stone blocks.
I hope you liked this video, I am Praveen Mohan, thanks a lot for watching, don’t
forget to subscribe and I will talk to you soon. Bye!