is it gonna happen today I think it is docked chops in the house the buds been
wiped down and I think the paint's about to start
flying
welcome back guys this is our five day Club 525 inch restroom we got to build
ladders we got to stay on the cab down we got to do a lot more stuff so there's
a lot to do let's get to it
so we've got a slight dilemma with this tracker in lifting it the front end of
the mainframe is so high off the ground it's really not a good place to Jack
from and we don't have a good platform or stance to take this off behind to get
the wheels off so we're gonna get a bunch of railroad ties build a platform
underneath there make it safe that way no one gets crushed
well we don't like the way this is looking
we're just too many blocks doesn't look safe we don't have the other wheel off
yet but we're going to go get something to make this a little more sturdy so we
can be safe when working on this tractor because there's probably 35,000 pounds
in this front half sitting here that could come crashing down and we're gonna
make that better
so here's what we're looking at rather than fabricating a stand we're in a buy
one of these pretty cheap it's just a big chunk of concrete basically these
will work I think there's a hold of big budgets and they were free
thanks Highline ready-mix you guys are awesome appreciate it
so we're going to do is we're going to take one of these we're gonna put it
underneath one side of the axle right here so it'll fit perfectly rider need
here and then when we jack up this other side put one right there
that way this Bud's not tipping over and so look a lot better than that because
that's not cool
okay what do you think so the tractor when we bought that bud didn't come with
the cover for the levers so back when leg arms was a little smaller leg arms
he built this one he doesn't like it says he can do better so he's making a
new one
O'Hara took a little bit this decal eraser wheels pretty awesome but I
chewed it up pretty good and it got pretty hot too I couldn't even hold the
drill hardly my hand but I got this off
that's nice to have done for sanding lots of sanding we just keep sanding
eventually to be done sanding and then we'll paint I keep saying that but no
the decal right here
all right it's time for some tires we're into the outside for for sure the inside
for not as big a deal because you can't see hardly in the metal on those so we
clean them up paint them still but these are the ones that I want to look better
so I'm gonna wire brush the inside it's hard to get that circumference with the
regular sander we tried some sandblasting it's just taken way too
long and it's gonna using a lot of Sam so we're gonna go ahead and aspire brush
that's we done the other tractor worked great let's get to work
that's how much fuels in this tractor right now we got to get the fuel out
because the fuel line needs replaced between the rear tanks the front tank
it's kind of rotten and we want to clean the fuel tanks out to you this tractor
holds like five hundred gallons of fuel it's like a third fold but we're getting
now right now take a look
is it gonna have today I think it is doctor chops in the house the buds been
wiped down I think the paints about start flying
alright there we are that's part of the painting done got the black on we've got
a sealer coat on all the areas that needed it but it's not done yet and this
has got to sit for at least a day before we can put the next coat of paint on it
next video part 6 will be the finishing of the pain and apply some decals much
stuff so thanks for watching guys appreciate it
god bless subscribe like and come back again