Hey guys today we have something special for all of you Mustang fans.
This is a 2013 Boss 302 Laguna Seca Mustang.
It is black underneath all of this gray.
It has a funny story, it was bought in Tennesse and driven back to California where it was
parked and hasn't been touched for about a year.
Sitting in its warehose it got tons of water spots, dust and over the past weekened some
kids decided they would practice mathematics on the hood and quarter panel which scratches
the paint.
Now I'm going to show you how to remove all of this dirt and debris without adding any
new scratches and swirls.
Later on we're going to show you how to polish it.
Now we're going to introduce you to our new product which I am super excited about, our
new TORQ Snow Blaster R1.
Like I had mentioned I am going to introduce our brand new TORQ Foam Blaster R1.
This is a great foam gun for those of you that don't have a pressure washer.
Simply foam your vehicle with the same great suds to prevent scratching.
Right off the bat you see this beautiful box, great colorful graphics and for guys that
wanted to take Jen home there you go shes right on the box.
We're going to open it up, you have your canoster made of big thick plastic which is very durable
with a sturdy base so it won't tip over and spill.
Here is the top which aerates the product giving thick suds.
The straw which collects the soap from the bottom of the canister.
What's interesting about this new foam gun is these three new attachments.
This helps you designate how much soap and foam is being put on the vehicle.
Using a smaller jet you are restricting the flow of snow or by leaving it open like I
am doing, you're going to get the most suds on the vehicle.
Lastly, we have the trigger nozzle which simply attaches to the base or leave it off for rinisng
the vehicle before and after the wash process.
We'll assemble it all, add some Citrus Wash & Gloss because we want to really cut through
all the dirt and debris and then we can start washing this Mustang.
Now that we're back outside we can start washing this Mustang but before we do that we're going
set up the blaster and the buckets.
I've already filled the canister and buckets with water so we can add Citrus Wash & Gloss.
As I mentioned this is going to cut through all the grime and everything that is on the
surface to get back to the black finish.
This is a concentrated soap, this is a thick concentration.
Shake it up to mix it all together.
We're only going to use an ounce which is about three cap fulls or about that much.
Now reattching the top so we can mix it all together.
We'll start by rinsing off the vehicle to knock off the heavier loose dirt and debris.
The reason why is because dirt and other particles are very abrasive and water helps lubricate
slightly and soften it but the foam is what encapsulates the dirt so that we don't scratch it.
We'll also place the Dirt Traps in the buckets while we're here.
Place it in at an angle and that is to prevent air from getting trapped underneath it whic
hwould prevent a good seal.
One for the wash bucket and another for the rinse to further reduce the chances of bringing
dirt back on to the car.
Now that these are set up we can now add Citrus Wash for more lubrication and shine.
Lets rinse down the vehicle and then we can start washing.