Hello I'm Harry Jones an applications engineer for Surtronic products here at Taylor Hobson.
In this video I'm going to show you how to unbox & install a Surtronic roundness R-150 instrument.
You'll receive several items which you may want to place to one side
whilst unpackaging the main instrument.
Once you have removed the packaging from the main instrument you may
want to seek help in lifting it & placing it in a suitable location.
Ideally this will be a stable surface close to an air supply.
For the initial setup you will require the 'AV pads' & the 'Air Hose' it will be necessary to
fit an appropriate air fitting to the hose depending on your air supply.
Position the AV Pads on the table & manoeuvre the instrument
to locate the four feet on top of these pads.
Place the supplied level on the spindle tabletop & adjust the four feet to level the instrument.
Connect the air hose to the instrument & secure it in place using the p-clip
provided on the rear of the instrument.
You will then be ready to connect your air hose into your air supply.
To set up the tablet you'll need the following, USBC Adapter Lead, the USB Hub, Instrument USB
Cable, Tablet Mount, Base Plate, Tablet Surround, Microsoft Surface - GO Tablet & Charger.
Firstly you want to fasten the tablet mount to the base plate using the four supplied screws.
Next you want to carefully cut out the removable sections of
the tablet surround using a sharp knife.
Take off the back of the tablet surround by removing the eight screws.
Now connect the USB adapter lead to the tablet & locate the tablet into the surround.
You'll then want to feed the charging cable
through the rear plate of the surround & connect this up to the tablet.
When the cables are tidally arranged,
secure the back plate to the tablet mount using the formerly removed screws.
Route the USBC adapter cable through the tablet mount so that it leaves through the rear cutout.
Next secure the tablet to the mount using the supplied button head screws.
Locate the completed tablet assembly
next to the instrument & connect the tablet charger to a power supply.
Connect the USB Hub to the adapter, in a suitable orientation indicated by the red labels.
You can then connect the instrument to the USB Hub using the supplied USB cable.
You can then connect to Talymin gauge
by locating it in the gauge holder & tightening the three mil screw.
You can then fit the stylus by locating the pin into the slot in the gauge.
Now you can turn on the spindle air supply by lifting the collar at the rear of the instrument.
You're then ready to take your first measurement,
in this example, I've used the rapid centering attachment, to aid with quick part setup.
Thanks for watching, for more information on the Surtronic product range,
please visit our website, links will be in the description below