I've got driver bits and drill bit scattered everywhere in my shop.
I've got more over here, Ohhh, I've been looking for those.
Good bye.
I have a piece of quarter inch ply that I have cut to size by measuring the inside deminsions
of the cabinet I want to mount my magnetic storage rack in.
I'll lay everything out just to get a rough idea of where I want everything.
Test these magnets...
nice!
and the rows of magnets should do nicely right around these areas.
Take a trip over to my extremely well organized scrap bin. (Clears throat) Yeah I gotta fix that.
Rip that piece of scrap down to one inch strips on the table saw.
Tack, tack, tack staple boom next.
I want to be able to use the peg board from the outside of the cabinet I'm mounting this
in and these one inch strips along the back side
will give me the space I need.
Now that that is done I'll adjust my fence
and rip some strips about a half an inch thick.
Then I'll take them over to my thickness planer and plane them down to the same thickness
as the magnets I'm using.
I'll just glue these in place and when its dry
trim the extra.
This is how the magnets came packaged.
I'll have a link on my website to where I got these. Check the description.
Just FYI it hurts when these things snap together and your fingers just happen to be in the wrong place at the wrong time.
Not that I did that.
Ok, I did do that. Some hot glue should do the trick.
All done, lets create some organization.
I will have all the measurements along with a cut list on my website not just for this
board style magnetic bit holder rack I am building here but also
for a stand alone cabinet style version. Two for one if you will. This style can just be
mounted on a wall or if you want to hide the bits
and make your space seem a bit more tidy you could build the cabinet version. Visit simply
easy diy dot com. Check the description I'll have all the links.
Hey thanks for watching, subscribe if you haven't. Check me out of Facebook and Pinterest.
If you like this video, here is a couple more you'll like as well.
Until then.