hey guys rolando from revemoto and today we're going to be working as 2017 but it also works
in 2015 to 2021 gmc yukon xl rear bumper so if you guys like this video go ahead and like
subscribe and turn on that push notification and hit that like button if you guys need
any prepaid auto body parts for your car, go to revemoto.com your pre-painted auto parts source
all right so here's our brand new red photo painted bumper right here
first thing we're gonna do is we're gonna go ahead and
put that cover piece right there like a little crack
this piece right here just line it up just prong with this
now we're doing these are going to be one of these grid guns you get this at like
home depot or close recorder online
and all you have to do is insert it in there and then use this tool to plug it up
continue on to the other side
all right so we have this top hat right here or the seal some people call it
just line up the tabs with the holes and then press down
well remember go around the whole the old bumper and get this bracket
and put it back in the same place you found them so this one particular bracket goes right here
so just taking one bite one by one is my recommendation so you guys
remember how to put it back on i'm gonna put that lower piece on
and just remember to go ahead and make sure the prongs
these prongs line up what i noticed right here it's hard to put in because
of this little middle bracket but you can actually take it off with these things
so let me show you guys how to think about um we can put it back in
so he's got a flathead kind of high up
all right so now that we solved that no problem we're gonna go ahead and put that lower
all right so just remember to take this off it was so much easier putting this lower
all right so if you guys remember that that uh module right there we took off and we kind
of drilled it out i put it back in with the rivet tool just the same way that i put the
uh that hood that was called the tow hitch cover on bracket so same thing
i just kind of did it off camera now we're going to go ahead and put the module back on
so
this is
then push
all right so remember
you gotta remember these uh these sensors have these plastic pieces on them
make sure they're right there and then look behind there make sure they don't crunch up
actually went in there
so make sure like the uh plastic piece goes around and it's snug in there
not like bent or anything like that or it's not gonna function correctly so make sure you do that
throughout the whole process of putting those sensors in all right remember to screw it down
before we forget right here
there's going to be these
we're missing one
you guys remember inside the bumper right in here
all right so you guys are ready so all that hard work now we're gonna go ahead
and put on the new bumper let's remember that clip right there the harness for the
sensors make sure you plug that in first and then get one of the bolts on the top
right here or on either side so it can be one of your helpers basically
foreign
so i figured out why i think he's jumping there's a sensor right here if we get that makes the gate
go down so you can turn that off or be careful so as you can see i didn't tighten it up all the
way it's kind of loose still but i'm going to press the sides in so let me show you guys that
all right so we're going to line that up on the bracket making sure it's sitting on top
and then we're gonna go ahead and put the bolts back into place
right there
so i'm not gonna bore you guys without me just screwing the uh bolts back into place or the
screws but i'm gonna show you guys when i get to the other side same exact thing so on this side
same thing as within the other side push that in and then put the screws in
all right last thing we're going to do is we're going to go ahead
and put in those 10 millimeters down there on each side and also the cover
and then we're gonna go and tighten up those bolts right there
all right the final piece of puzzles right here make sure these things hook on the top and then
screw it into place
all right guys that's how you put on 2015 to 2020 gmc yukon xl rear bumper
it was a very big bumper but hey we accomplished all by ourselves
go ahead and comment down below if you guys have any questions about this uh this installation and
also give us a like so we can produce more great content like this for you also if you guys need
any pre-paint on body parts go to revemoto.com your pre-painted autobody part source thank you