last column it's either going to be NA which means it
account right now because I'm going to show you how to do
here is the overlap cut off and if you remember I said that the
Now, I don't actually have any tag groups tagged on this
that 90, 000 or any of these new kits are going to be above
have tag groups, you may have made them a different color.
matching remember there's two tools there's the basic one
that doesn't really have a lot of the sorting and then there's
to a higher number then that will eliminate those matches
the beta version that you can sort through different things
information that you need. What we can do is we can go over and
thousands of matches that are all these small you know, 1015
because these people all have to share at least 20
not necessarily close family members but second, third,
you use this? Well, I'm going to look at my 500 matches and
000, I share roughly 9. 9 centimorgans with those people
change that limit. So let's say that I want to look at my top
see at my 3000s match how much centimorgans I'm sharing with
looking specifically at XDNA matches, it's going to be able
together, then, you can click on the hapla group and that's
just looking with hapla groups and you want to group those
use the one to many tools, put it in the comments below and
those respective websites. Now, if you have any quest on how to
all those to the top. Again, with the total CM, that's
those two kits. Now, with this format, there are some
start to look at your match list, you have thousands and
looking for as far as your overall matches. I would
different things we can do. You'll notice that in each one
I want at least 90, 000 sniffs matching to be able to call it
90, 000 you're not going to see any of those 50, 000 kits or
top 100 matches and I want to just be focused on the next
you want to see what the most recent one is, you can look on
or reverse alphabetically. So, you can look at the kits in an
that only share a smaller segment of that. So how could
numbers based off of anything within here. As long as I don't
sets so what I can do is I can put 100 in the offset that
way. If you want to just look at all the ones that have a jet
of these columns, you can actually sort by alphabetically
at an offset so let's say for instance that I'm looking at
so the next thing we can do with this list is we can start
that in another video but what this will do is it will
centimorgans or more the next one tag groups. Now, if you
uploaded this kit. As is the next two columns which are the
centimorgans, but they're really really distantly related
this list and I've already looked through all of my first
that is the same thing and then we also now have the XDNA. So,
difference now is as you can see each one of these is
one-to-one comparison. The generation's column is an X and
them and all the way down at the bottom you can see at 3,
matches is for most people going to be plenty of
going to change some around and we'll see how the list changes.
been uploaded for you know 345 years six years in some cases
actually have to Email the Jed Match programmers to figure out
to me and I am still trying to figure out what this is I might
and another one that is important is XDNA. If you're
have some more information on that, I'll be able to give it
what type is everything that I've seen is a two. So, when I
that or if you want to see the oldest one, you can do it that
match or a tree, you can click on that and it's going to bring
this beta version, there are also some other tools and we
other programs like Ancestry Family Tree D and A 23 and me
getting on to Genesis and start going over your match list and
is the source which is again what company that kit was from
and of course the overlap. How much overlap there is between
seeing what matches you actually already know and which
this is the same as what we saw in the other tool but the
but also the XDNA that you share with those people. There
and this is the total amount of shared DNA that you have with
if you want to eliminate some of these smaller kits with with
WikiTree and as you go down here you can see that some of
hapla groups for your mitochondrial DNA or for your Y
was already done on Jed Match so it definitely has more than
two little over app, then you can change that number. So, for
the red kits that we saw earlier so those are some
actually bring the groups up to the top so that you can focus
what I'm going to find is that in this overlap column the very
outdated in some ways. Then, we get to the total sentimorgans
on any of those tag groups. Now, finally, the last tool
some of the kits that I manage right here you can see they've
over Jedcoms in another video then column is the age and this
I'll try to answer it for you and if you like this video, be
ones you may have already matched with through one of the
match them on GEDmatch, you should also find that match on
So, some of them may be incorrect, some of them may be
different tools you can use on GEDmatch in the one too many
more overlap you have, the better it is for a match. So,
let's say of that top 500 matches, I know that I have a
to you. Then, we have the sex of the person whether they're
because if they've uploaded their kit to Jed Match and you
recommend this is the first place you start when you're
you can actually change the thresholds for what you're
lot of endogamy and that is where we have family members,
a match. So when I search through there now as I go down
instance, I want to change this from 45, 000 up to 90, 000. So
fourth, fifth cousins that are inner marrying all the time and
go above 3, 000. Now the next thing that I can do is I can
means who's going to start at my 101st match rather than my
50. So this is just looking at my matches number 1-50. So the
to you so by changing this and let's say I'm going to change
it to 20 then it's going to look at everybody that has more
change what the limit is. So for instance if I change this
than 20 centimorgans shared so you went so you can see that
So this is my 101 to 201 matches. And I can change these
100 matches Well now I have 100 matches And for the free side
that match list went from 500 people down to just 143 people
first thing I can do is I can go up to this limit and I can
to pull up those matches that you share XDNA with. Now, with
you can see that hey there it's a little bit different there's
the one to many for that kit just like the other when did
going to be either all at top or all at the bottom. If you're
options up at the top here now it's only available to tier one
actually some different columns in here some more information
so you end up looking like you share a lot more DNA than what
you really have and what it does is it means that when you
alphabetical fashion. If you want to look at the ages. So,
this column is this type and this is actually something new
Match website others of these have only been uploaded for a
few months or in some cases you'll find just a few days now
the beta version is reporting not only autosomal DNA that you
first match and it's going to Look for the next 100 matches.
hyperlinked and that's because that one to one tool is now
that hyperlink so that hyperlink will go to that
can go back to the top, we can actually see this. We're
you can actually look up to 3, 000 matches. Now thousand
So first off I'm going to start a news list and it is one to
going to group each of the called Hapla groups together
that person then there's the largest sentimorgans and again
DNA and again, these are all self reported by that group.
now I'm just going to search and so I get a match list and
and again that is the same next we have a new column the Jed or
is how long that kit has been uploaded so taking a look at
based on what they've uploaded as far as a Jedcom and I'll go
these have either Jed or I don't have it listing WikiTree
on any of these what this is is this is a link to a Jedcom file
so that you can actually see how that person is related
male or female and this is reported by the person that
kit number and if I click on this then it's going to go to
then we have the information the name and the Email address
because that's how long it's been since I've been on the Jed
a kit number and that's what I just described before it is the
that I can't select any of these boxes the next column is
want tag groups what the overlap cut off is for right
column is the select column and this is for visualization
customers and so right now you can see that it gives me an X
and there's some other things that we can do now this first
second it tells you what size you want and then whether you
customization that you can do. There is not a sorting of any
kit number in here at the top then we're going to filter by
green. What that indicates is that indicates that this is a
tool. Now, the other tool is called one too many the beta
one thing you will notice with this tool of the one too many
and you can add those whatever match list that you organize
this one right here that's light green it was uploaded
somewhere else or take a look at them in more detail. Now,
this was done back in 2018 in December so most likely this
of these cases you can see that these were back in 2018 and
kit was uploaded in of that year. Finally, the last column
digits. So, it is a little bit different as far as the
first letter of the kit number to indicate the testing company
all of the other kits as far as finding its matches so in some
all which indicates that yeah, this is a much better
a really good comparison but it's still able to compare.
twice as much as that other kit and it doesn't have a color at
kit is upload it's going to be compared during processing to
of snips that is being used to compare these two kits. Now,
it says it's 50, 000 snips and that means it's not necessarily
color highlighted. What the overlap is, is it is the number
it says NA and these were all kits that were uploaded into
was created. Now, you can see with a lot of these right now,
parents. When you get further away, it will go to
some other people that I manage kits for. So, don't assume that
out, still getting the final programming finished with it
and that means that there's some bugs that they're working
you know fairly big number if you have very close relatives
but I've used it several times and I find it very useful. So,
largest segment in sentiments that you share with that
person. Now, the top of the list here it's going to be a
the family but also my wife's side of the family and also for
through what is different about that. So, first off, when you
of these columns or being able to move things around and so
what you need to use for that is you need to go to the other
centimorgans and in this column it is telling you how much
total shared DNA you have and this is usually a good idea of
grandparents and then aunts and uncles at about 1. 5 and then
what's new what you should be doing is once a month go in and
use to contact the person that manage that kit. Now, one thing
and then it has this offset we'll talk about that in a
that some of these kit numbers will be highlighted in a green
predictor of how closely the year related other than the
but I have a ton of kits for not just my personal side of
the kit number, it has two letters as the first two
click on it, you can see, yeah, this is a completely different
user interface that you're seeing. We're going to put our
the time you get to about 4. 04. 5, it's really not a good
me exactly that this is 23 and me and you can see over that
either autosomal X in this case we just want to do autosomal
new kit. You can see that this one was probably just uploaded
and sometimes it's a darker green, sometimes it's a lighter
company over here. So, for all GEDmatch kits, you have to know
So, the next column here is the date compared and this is the
just about a week two weeks before that and so it's a
in the end of March but if I scroll down here I can see that
feel free to give the one to many beta a try and we'll go
last 30 days to see what new kits are available so if you
but since then, they have gone to just a random 2 characters
using the Jed Match algorithms but as you go down your list,
of as you're going down is you'll see every now and then
nomineer for the kit number. Now, something else to be aware
comparison for it. It's probably much more accurate.
the person that you're matching with is the person that's
look for these green kits which indicate that that is a new kit
the more snips, the better. So, in this case, this is red and
Whereas, if we go down a little bit further, we can see that
matching comparison is that there's not a lot of
the old Jed Match system and so they were initially analyzed
you're going to come across some that have a number and a
periodically want to be looking at your Jed Match list and see
interesting one because this is part of the reason why Genesis
this is probably when they were doing this initial Genesis
last time that these two kits were compared usually when a
that M is 23 and me, A is Ancestry, T is Family Tree DNA,
and H is My Heritage. With the new system for all the new
uploads, you can see right here, hey, it's going to tell
is the testing company. Now, previously, Jed Match used the
cousins, first cousins at about 2. 0 and it continues on. By
lighter green what Genesis is doing is it is looking at the
for the first and so they'll actually tell you the testing
crossover with some of these newer kits you can see that hey
hey, this one has 133, 000 snips being compared more than
generations removed the two of you are. In other words, how
the amount of sentimorgans that you match is the same as the
far this kit of this person is to this next person. Now, a one
Email somebody, you include that kit number and that alias
how closely you're related. In some cases, you can actually
Email whose kit you match. It may be somebody else. So, the
total sentomorgans and that just means that you match on
identify what that relationship is just based on the amount of
as you go down further in the list what you may find is that
going to be answering the Email. Make sure whenever you
manage multiple kits and in fact, if you come up with DNA
of DNA you share is not very large and there's lots of
fact that hey, you're at least four generations removed but it
because it may not be the person that's answering the
The next column is the overlap column and this is an
different relationships that overlap with that amount of DNA
could be a lot further away and that's just because the amount
next column is called the largest segment and this is the
point 0 relationship is going to be either a twin or your
cenamorgans that it's showing. The next column here is the
generations column and this is an estimate of how many
that kit number. Many people in the name field, they actually
to remember is that as you can see here, a lot of people
second column is one to one and this is actually a tool to do a
just one segment so the next column is the total
one-to-one comparison to and what it's going to do is it's
out, go ahead and try it out. Now, the next two columns are
the kit numbers for the kits that you match and each one of
as you're looking at this different information. The
going to open the one many tool for that kit number. So, you
going to open up the one-to-one comparison form. I'll be
covering that tool on another video but if you want to try it
the name and the Email and this is the information to identify
these is hyperlinked. If you click on them, they are
at Lead dash Web.org, that means you match one of my kits
use an alias but the Email is the Email contact that you can
comparison and let's just go through each of the columns
here. So, first off is the kit number column and that is just
the quick table that it will give you for a one to many
that you understand what information is being displayed
one-to-one comparison between your kit and that's listed
can actually jump from kit to kit to kit all the way through
right up here with this kit that you're doing the
the kit numbers that you manage. It can also be any
going to have you enter a kit number. Now, this can be one of
with the one-to-many comparison result and this is the simpler
actually use this one-to-many tool and we're going to start
of matches for that kit. So, let's go back and let's
of those two tools. Now, what it's going to have you do
other kit number that is publicly available. So, this is
one to many tool. Just like that, it will pull up the list
you manage kits over here in your DNA resources and by
clicking on any one of these kits, it's going to go to the
access to this tool. There are actually two tools right now
show both of them but first, what I want to show you is that
of you who do not have a tier one membership, you still have
and they're each a little bit different. So, I'm going to
is going to be down here under DNA applications and for those
segment of DNA. In this series, I am going over all of the
cousins by using the one to many tool.
you're using the Genesis System of Jed Match, you can find
Howdy, I'm Andy Lee with Family History Fanatics and this is a
tool. So, when you log into Genesis, the one to many tool
today, we're going to be talking about the one to many different tools on the new Genesis System of JedMatch and
Many people take a genealogy DNA test to find cousins and if
sure to give it a thumbs up and tell your friends.