Hi folks, Kirk here with Kirk Giordano plastering. I want to show you today
the drips treatment around flashing, and we ripped off all of the stuff. Oh, here now,
there's a lot of ways to do this here. One of the best ways after the stucco is gone is to
have a flashing here going down inside this. These drip screens we kind of counter. Their
flashing coach says two inches inspector here says we can do one when we do roofs
stairs deck. It's always 2 inches. Still, he said we can do 1 inch, which is fine because
these fellas only put this up 2 inches anyhow, and we want to go over their flange. Hence,
what I'm doing is I made a couple templates a little wood blocks here. They did 1 inch,
so I'm putting this guy right here. I'm putting this here, and that gives me a template. I've
already done some of the horizontals, and then I go vertically down; I'm going to
do another one here just to give you an idea of the proper way to do stairs again, granted, yes.
construction there'd be one flashing going all the way up and then the stairs are port but the
stucco was torn off afterwards so now we have to improvise to accommodate the stairs now this
guy here now this - to do drip screens metal flashing the flashing I've been doing this a
lot of years this isn't something that somebody can watch this and see how it's done but again
a lot of folks who say gee how the heck are we going to do the stairs well this is the
way to do it there's a couple way to do chimneys stairs and this is the proper way so again I'm
just going to be cutting pieces fishing them in here fishing them in here the verticals because
my horizontals my guidelines are already done anyhow now to give you an idea if you're ever
going to do drip screens and the proper deck flashing this is necessary all right guys well
since I'm getting ready to pay for this anyhow I would use the roll paper for its high ready razor
straight down that wrong good night Susan I'll just set this here easy wait up that's my paper
just come down angle now I could fish it in each which way and take forever I could just do this
we're gonna put our next pieces over here, and this way, there's not a whole bunch of
little points right here the whole bunch a little joint one solid piece the next
piece goes over that it's a real nice way to assure yourself a watertight seal thanks for
watching again this is Kirk with Kirk Giordano plastering and this is for those who want to do
it but don't know how to thank you, Jason, for the go-ahead and taping this one here,
and I'm gonna finish off what I'm doing we'll see folks on the next one