Hey, DIYers, Jorge here from AlarmGrid.
Today I'm going to be showing you guys how
to troubleshoot a Lyric system that's using Apple HomeKit.
So first of all, what is Apple HomeKit?
How do you get it on the Lyric system?
A lot of people, they buy the system,
and they automatically expect it to start
working with their Apple HomeKit, and all
their other HomeKit devices.
That actually is not the case.
First, 1, in order to enable HomeKit,
you are going to need a monitoring company
to enable HomeKit on the actual system itself,
so it does not work right out of the box with HomeKit.
You need to activate the panel with an alarm company,
and they have to send out a command
to enable the HomeKit feature on the actual system itself.
2, your HomeKit devices do not directly work with the system.
They're actually bridged by a HomeKit device,
like this iPad, if you have an Apple
TV, if you have an iPhone.
You're going to be using the HomeKit app to integrate
other HomeKit devices, such as lights, locks, thermostats,
cameras, doorbells, whatever it may be,
you're going to be using the HomeKit
app to integrate those HomeKit devices to the Honeywell Lyric.
And obviously, like I said, you need
to have that feature enabled by a monitoring
company on the system.
It does not, I repeat, does not work right out of the box.
All right, so let's say you guys have HomeKit enabled.
Lyric's been working great, your HomeKit's been working great,
the integrations are amazing, but then
all of a sudden, you start getting,
a no response, which I'm going to show you guys in a second,
here on the tablet.
You open up HomeKit, and your system
is showing no response or a unavailable, which sometimes
does happen whenever there's a Wi-Fi issue,
or something like that.
Couple of troubleshooting steps to do.
1, you want to make sure you have HomeKit enabled, which,
like I said earlier, you need to have that enabled
by the monitoring company.
2, you want to make sure that the tablet, or whatever
device you're using HomeKit on is on the same Wi-Fi network,
as the Lyric.
Something to keep in mind-- the Lyric only
connects to 2.4 gigahertz Wi-Fi network.
So if you're using, an iPad or your iPhone and your router
does 5 gigahertz and a 2.4 gigahertz frequency,
it might not be working if it's going to the 5
because the Lyric only connects to 2.4.
So always make sure it's connected
to the same Wi-Fi network.
I'm going to go ahead and open up my tablet real fast,
and show you guys some other steps we can go ahead and do.
One other thing you guys can do before actually removing
the Lyric from HomeKit and resetting HomeKit
on the actual system itself, you guys
can actually just do a reboot on your modem and reboot
the panel itself.
So obviously, we're all not new to rebooting a router.
You unplug it from power, leave it off for 30 seconds.
You can also try rebooting the Lyric system,
unplug the backup battery, and unplug the system
from the outlet.
Or if you're using the LT cable, just
use a little barrel connector, remove it,
and the system will power down, and then
just power everything back up.
Sometimes everything just pairs together
and everything starts working again.
And then, if that still doesn't work,
then that's when you're going to need to unfortunately reset
HomeKit and remove the accessory from your HomeKit app.
All right, guys.
So I have my tablet on the Apple HomeKit app.
As you see there, I'm getting that issue
that some of you guys may get.
It says no response, or it might say unavailable.
So the very first thing I'm going
to do, I'm just going to go ahead,
and delete the panel from my HomeKit.
It might not be that convenient for you
guys to do if you have a whole bunch of scenes and everything
set up, but if it comes down to it,
this will be probably the last step
to troubleshoot after you've checked the Wi-Fi network
and everything.
So you might have to delete the Lyric
and re-add it, and then if you have
a whole bunch of other devices, recreate
the scenes all over again.
All right.
So the first thing I'm going to do to delete it.
Let me just see here.
So there's a little exclamation point
right on top of the default room Lyric that says, No Response.
I'm going to hit that exclamation point.
I'm going to hit the little gear icon in the bottom right.
I'm going to scroll that down to the bottom,
and there should be a Remove accessory.
So I'm going to remove the Lyric system from my HomeKit for now,
starting fresh.
Again if you have a bunch of other HomeKit devices,
those should still be fine.
All we did was remove the Lyric.
Now what I'm going to do on the Lyric,
after I remove it on my Apple HomeKit,
I want to reset Apple HomeKit on my Lyric system.
So you guys are going to need the master code for this.
So I'm going to go to--
let's say you're in the primary screen.
This would be the screen security automation,
video, smart scenes.
You're going to go to Security.
When you're in Security, you're going to go to Tools.
Now, here, you're going to use a master
code, which is a lot different than an installer code.
So the master code, mine is defaulted at, 1, 2, 3, 4.
From there, I'm going to go to Advance,
and then I'm going to go to reset HomeKit.
Are you sure?
Yes.
This is going to basically wipe out
any HomeKit that was recently paired to the Lyric system,
which, again, we want to do that so that we can start fresh.
All right.
Now after I reset it, it'll bring me here.
I can go ahead and hit the Back Arrow key.
If I want to make sure what Wi-Fi network my system
is connected to, I can easily go right here to Wi-Fi config.
I can go to scan Access Point real fast, and then from there,
it should show me a check mark as to what's
right next to the network that I'm connected to.
So I'm connected to AlarmGrid.
Good.
So now I know, when I'm connecting my tablet now--
I'm just going to check the Wi-Fi real fast.
It's connected to AlarmGrid, so the same Wi-Fi network.
Now from here I'm going to go to Add Accessory.
And again remember, when you're doing Add Accessory on Apple
HomeKit, you're not going to have a code, nothing to scan.
So you're going to hit I don't have a code, or cannot scan,
and then it should show you the Lyric.
You probably are only going to have one Lyric in your house,
so when you see that Lyric, you're going to select that.
Luckily all the other lyrics didn't pop up on mine,
so I'm going to go ahead, and just
select that one right there.
It's going to ask me to enter in a code.
If you look at the Lyric system, it's also
asking me to enter in a code.
You need to enter in the master code, that's
the pairing authorization.
So you need to enter in 1, 2, 3, 4.
That's my master code.
And then it's going to give you that code.
Now, from here, you can either use a camera
and point it at the Lyric screen,
or you can just type it in yourself.
3, 7, 0, 4, 6, 4, 6, 6, and then hit Continue.
Remember, yours is going to be different.
It's not going to be the same code,
so do not try to use that number that you just saw on my Lyric,
because it will not work.
You need to use the one that's on your Lyric.
All right.
Now it's going to ask you to go through the whole set
up all over again.
Where is the Lyric located?
And all those other steps, whenever you're
setting up a HomeKit device.
But these are the basic steps that you guys want
to go through whenever you're troubleshooting
HomeKit on the Lyric system.
If you have any issue with HomeKit,
you want to try these steps first.
And if this still doesn't work, the last step
would be to call your monitoring company
and just see what's going on.
Maybe they can reset it for you or something like that.
If you guys have any other questions,
please feel free to email us at support@alarmgrid.com.
If you found the video helpful, make
sure you hit Like underneath, subscribe to the YouTube
channel, and hit that little bell icon,
so whenever we upload new content, you guys get notified.
I'm Jorge, and I'll see you guys next time.