what's up guys yes it is Monday it's not freezing cold it's actually almost 50
degrees right now I do think it's gonna rain probably can't see it here in the
video and yes I got my beard trimmed my haircut I feel great
so I'm ready to get going we're gonna be working on sealing today we're gonna be
hopefully wrapping the ceiling up and even working on our sidewalls
remember we already laid off our base trim we got all of our interior wall
framing done so feeling pretty good about this and I
want to show you something real quick now take a look at this see that that is
condensation now I get a lot of questions about vapor barrier and do you
really want that vapor barrier on your walls because you're gonna trap moisture
inside the wall cavity well this is acting like I think it's
supposed to and that is by keeping the moisture from going through the
insulation and condensing on the backside of the outside steel so this is
this is going to keep moisture that's in the building in the building now that
does mean that you have to condition the space that means you have to run a
dehumidifier if the humidity level gets too high we've sealed this cavity off
we've got a breathable weather barrier on the outside that's allowing anything
on this cavity to breathe but we're not letting air pass through from here to
there which is where your problems usually persist now I would love to hear
what people think about this and this is pretty extreme we've got a really big
warmup so there's a lot of moisture in this building right now and so there's a
lot of condensation that typically is not gonna
be here but it just represents what the thought process is maybe it's wrong but
it's our thought process we're stopping water from going through the cavity and
condensing on the outside so I don't know I just want to show you guys that
so now what we're doing here in preparation for the sealing is we've got
everything cleaned out of the building because working around stuff is just a
super huge pain and right now what we're doing is we're determining the center
location and we're snapping our line for that first sheet of steel because it is
a raised cord trust we usually want to start in a corner but we really can't do
that because we want to have that crisp rib line right down the center so what
we do is we start in the middle we work to one side and then we come back to the
middle and then we work out the other side I'm really excited to get this
ceiling I love doing the vaulted raised core trusses and listen it's going to be
insulated I don't know how many times I have to say this I don't how many times
I have to answer that comment down in the comment section but yeah we spend
time insulating the wall cavity and we also insulate the ceiling with an are 38
fiberglass
you got cardboard yeah mr. beaver yeah leave the beaver who's been so long
since I have what's his name the the friend that's always like you
look beautiful you look like a buck yeah
right yeah let me grab my bro I might have a girl so it's all you it's
all you bro where's our center line sensor is this
guy I know but what are we doing over here I I wouldn't do it I just put like
a temp screw in it then once we got our sheet on we'll climb back up here yeah
well we want the plastic on over here why don't we put it over on that side
then or we could put it over on that side cuz I wanna let's strike here but
we could throw over that now if you decide I think the Southside makes more
sense okay good get low when the whistle goes I mean like we might shatter the
box real quick do it man come over here and grab this drills right on my waist
right over here in the front I'm just gonna attack us here so we can give me
one second there hit one here and then we'll go get McGill peeking Kiera
why would just showed up this time around I think I might have mentioned it
but I went ahead and got AC cabinet grade plywood it was literally a couple
dollars more sheet and it looks a ton better so I'm excited to try that for
the first time we typically use a BC X 3/4 plywood and honestly that's so we
can get a lot more strength on the interior wall customer can hang anything
anywhere
Oh
look at that ac great plywood
need to get that file back covers uncovered get that pile it on the folder
and then we'll get the scissor lift loaded with our lumber and by then I'll
be down this wall room that's our seven floors yet just like I planned it in
thank you I look at it do the way around Greg how did I get blessed with such a
preacher like you yeah we're good
come back after lunch and we'll go ahead and rip this last piece down to go
through there but first half is done it's all downhill literally we're gonna
start the peak when we come back and we're just gonna go downhill literally I
love putting ceiling and yes it's a lot of work it's hard on my shoulders
everything's above your head but with that mega deck scissor lift three guys
the right tools man it goes quick and it is very gratifying but we're on the last
row of Steel and I think it's really cool here to note how the the vapor
barrier is getting sucked due to the vacuum pressure of the soffit draw up to
the ridge vent and I always think that's pretty cool just seeing the building
science of the building actually working like it's supposed to which is the
chimney effect where it's pulling that lower air pressure up to the ridge cap
so I think that's pretty cool
similarly 30 and a half to 13 3/8 it's always kind of rewarding when you get to
your last couple sheets and the whole run has been within 1/8 inch I think 30
and 3/8 30 and 1/2 measurements so that means at least that we ran it fairly
straight very rarely do you get every one of them to be exactly perfect but
1/8 inch we can handle that
just bought it I think down over there I'm saying biggest flaw that gun dog
nice check out this AC plywood it is looking great look at look at these
seams yes there are multiple pieces there guys it's not just one big piece I
think that AC plywood was well worth the extra a couple bucks a sheet I think it
totaled about $180 on the job for the entire amount extra 30 and 3/4 Greg
let's take a step back and look at this wall it's gonna be great this is where
that 12-foot mezzanine is gonna be it's gonna come out of that end wall 12 feet
and it'll be like 8 foot tall so you can have like a nice little metal metallurgy
working area look at that sweet
Oh
make sure there's no staples yeah Bob that's a great humble gie
another path for ya if it don't look right
probably paternity right touch it why you know
well that was a pretty productive day for us guys killed it we got the ceiling
done that raised chord vaulted look it's awesome and then we went ahead we had a
little bit like a half hours worth of time so we went ahead and started on
this back wall we got that ACX plywood ran out scribed around in this corner
that turned out pretty good looks like a nice seamless wraparound corner and then
we've also got this guy over here started as well so tomorrow we'll get
back here we'll run out that plywood remember there's a mezzanine back there
so we can't just run the steel on top we'll have to do a little bit of I guess
special trim I'm gonna go out on the limb I think tomorrow that interior is
gonna be pretty close to getting finished because there's not a lot to it
and we definitely have some pretty good systems in place I think to get that
done pretty efficiently in one day so I'm sure I'll to come back off to make
my window trims and then once the concrete's done I'm sure we'll come back
for the mezzanine but needless to say not much left here guys so if you
haven't already hit the subscribe button give me that thumbs up Greg said he
needs it it only is the only way he will feel good about himself that's not true
Greg is super uber confident but regardless definitely appreciate your
guys support so if you like the video sorry about the fog just moved into a
new climate here in the trailer says it's heated but if you liked it hit the
subscribe button if you haven't already I'd love to hear your thoughts on what
you guys think yes remember the ceiling will be insulated that's super foggy
let's get that cleaned off well I don't know if that's gonna get any better even
if I wipe the lens off so we'll catch you guys on the next video thanks a lot
for hanging out watching the video but like I was saying the ceiling will be
insulated I will try my hardest to come by when the subcontractor is here
blowing in that fiberglass but don't fret we spent time to really
make sure that this building is going to be super energy efficient for our client
and I think you will enjoy it for years to come
he definitely is gonna have an awesome workshop that I'm sure anybody would
love to have so we'll see you guys on the next video later