hey guys welcome back today i'm going to be doing a 2014-2019 chevrolet impala
front if you guys like this video go ahead and like subscribe and turn on that push
notification if you guys see any pre-painted autobody parts for your car go to revemoto.com
your free paint automatic one source let's get started all right once you have the uh
front bumper and accessories are all put together the brand new bumper go ahead and uh we're going
to plug up the fog lights and also get some screws that's supposed to be on the top portion of the
bumper like this and we're going to have those help us out hold the bumper
so i haven't put the bumper in place i just want to show you guys right here
make sure that this tab lines up with the holes that's on the fender or it will never sit flush
all right once you have those bolts on the top securing the bumper they're not tying
all the way they're just very loosely put on i'm gonna go check underneath the bumper it's like
that fender liner needs to go underneath the fender i mean underneath the bumper
and also anything that's holding the bumper from sitting flush underneath
all right so now we're gonna put the screw up there and then the screws down here
so remember that's going to be a t-15
so now if you guys remember there was a bulb right here that you have to go inside through
the spender right here so i'll show you guys how to uh put it on from this side
at this angle then over there i'm going to show you guys from the inside angle
so to make the easiest thing to do with the hand tighten it first
and then you use the ratchet to tighten it up
oh it's like you just uh see if it's flush and if it's wiggling or anything
it looks good and there's going to be another angle of how i'm gonna put that screw inside here
so again first i like to hand tighten it
and then i tying up with the wrench
so once it's in place kind of guide it
all right so now we're on this side so go ahead and make sure you put the
bumper on top of the bracket and then we're gonna screw it all in
all right so this one right here we had to finesse a little bit just because the fender
was like a broken bracket back here with the headlight so the customer didn't want to fix
the headlight so we're gonna go ahead and do our best but hey it looks pretty good to me
now we're gonna go and put that bolt in
all right it's gonna go ahead and put those t 15 torx bits in
all right there's more over here but he's missing some so we'll get some more
at the dealership later
so right underneath the bumper there's gonna be the fender liner remember put those uh
seven millimeters back on
if you guys look right here there's another one where it hits the damp it has broken so don't
forget that one either and i know you guys are wondering why is there no black lower valence
rubber piece right here uh the customer just didn't have the uh
ability to get those so it's okay we don't need them anyway so it's just a little uh ground effect
that prevents you guys from hitting the curb but all in all the bumper's still in one piece
so i'm going to go ahead and put on the other fender liner right underneath
so this was not the original one uh the customer gave us this one
it doesn't fit properly it is the same uh look on the fender liner but it's not the same exact one
so we're gonna do our best to put it on but i think the holes are not lined up correctly
and it's too uh too short but we'll do our best but hopefully you guys have the original ones
so if this piece came off go ahead and put it back on same way
so this one over here is missing a uh a clip
so we can put the screw on there so we got to get that one at the dealership
also all right guys so the last thing you have to do is put this back on
but as you can see i didn't take this off in the first place but it was missing
these clips already so the clips look like similar to these push pins like this
but we're gonna get some of the dealership so you're gonna need one two three four of those okay
all right the last couple things that we got to do is uh go ahead and screw these back on
all the way around so screw them on just like the ends basically and then
we're going to put the hood down so we can check if the alignment is correct
all right we're gonna go ahead and check the alignment put the hood down
so it feels a little too tight on this side so we're gonna adjust it over here
all right once you check the alignments good go ahead and proceed to put those bolts in
so one of your bolts gonna look a little different which is this one
compared to this one so they're one is a little bit fatter than the other one
so you're gonna have two two of these one on each side but basically it's gonna go
in the bigger hole this one right here that's gonna go right there
and also on the other side
all right last but not least i'm gonna go ahead and put this cover on
and then put this pins back in
all right guys so that's how you saw 2014 2019 chevrolet impala front bumper
if you guys like this video go ahead and give us a like and also comment down below
with any questions you guys have if you guys need any prepaid auto body parts go
to revemoto.com your pre-painted autobody part stores thank you