Hi, my name is Russ Baker with Limit Out Performance Marine in Pacific,
Washington.
Today, we're going to go over the Power-Pole system, the anchor
system, that just came out about a year ago or so.
Currently, we have a Ranger bass boat and we have the eight foot
Blade series on here, great product for anchoring.
If you want to fish shallow fish, whether it's for
spawn fish, or you're flipping bushes, this is the best way to go and the
fastest way to go.
The biggest things I want to tell you about is you want to make sure if
you're going to do a Power-Pole system, is to make sure you have the right
components and the right parts.
Each jack plate is different on every bass boat, salt water boat; each jack plate needs
a different bracket.
When you purchase your power poles, make sure you have
the right bracket and th e right bolt sets for that bracket.
What I want to do is go over a little bit, as far as the installation of the Power-Pole
system and the bracket, the pumps itself, and the wiring.
What I do not recommend anybody do unless you're totally mechanically
inclined, is to install this yourself.
What I'd rather see you do is to get it professionally done at a dealership like
Limit Out Marine, or your closest bass boat dealership to you.
The biggest reasons for that is pump location because there is not a lot of room
in the back of a bass boat.
One thing we run into a lot on some brands of
boats, for instance like this Ranger, we had to actually custom build a
bracket to install the two pumps in a very, very tight location.
Other brands, such as Skeeter, same situation.
You have three or four batteries, a battery charger, and the
fuel tank you have to deal with.
You'll actually have to customize a bracket to install the brackets with.
The other thing, too, is on this boat, we did something a little bit
different.
Since we didn't have a lot of room in this back transom area,
what we decided to do is actually run the hydraulic cables through his
cable tube for his engine.
In this case, it was a lot cleaner application.
On most boats, you'll see there are actually two fittings with actual
hydraulic hoses coming through and then back to the poles themselves.
Wiring placement is a tough call because it all depends on the actual boat
itself, how it's wired in the back, the placement of the batteries, et
cetera, et cetera.
When you actually get the Power-Pole installed by your dealer, have your
dealer bleed the system, make sure the poles go up and down evenly to where
both poles go down at the same time.
You want to take this boat to the lake after you pick it up, after the dealer has
installed the Blades, and actually cycle through the cycles on the Power-Pole
two or three times to make sure both of them come up evenly, and
back down evenly at the same time.
Occasionally you will have this.
Occasionally, the brackets will actually be installed between the motor mount and the
transom of the boat.
In that case, what you try to do is line everything
up.
If it doesn't line up, sometimes you'll actually have to drill a
hole in the boat.
Use 3M 50-100 silicone sealant to keep water from intruding
into the boat itself.
Sometimes actually, Power-Poles are mounted right here in the back of the
transom.
In that case, you want to make sure you have an effective
watertight fit here as well.
We don't recommend that because then there's more stress on the transom.
What we like to do is put it right in between the jack plate and the motor itself.
Wireless remote system does come with this.
That was the other thing we wanted to go over with you.
You can use your wireless remote, or you can do
a manual switch, or a foot switch.
You can install a foot switch on your bow.
You want to just put it around your neck, or in your side storage box,
that way you can just go up or down with the poles itself.
You do not want to leave this in your pocket, just in case
you fall in the lake.
What might happen is this, this gets wet, fries the unit
itself, unless you actually have a manual switch on the side of your console
location.
Leave this in the truck, get ready to go, pull it out, put
it in the storage box, and you're ready to roll.
Come see us at Limit Out Performance Marine for your power pole installs,
we'd be glad to take care of you.
Take care.