What’s happening ladies and gentlemen,
this is Minh from Architecture Inspirations,
today I’m going to show you some lighting tips & tricks
in Enscape 2.3 for Sketchup.
Let’s get started.
First, I’m going to change the time of day to night time
so we can see the full effects of the lights.
To start creating lights for Enscape,
First, click this button here to launch Enscape Objects
This toolbar contains several types of Objects
including Proxy, which I covered in a previous video.
But more importantly, the different types of lights
that you can use to illuminate your model
You can click on one of these light sources
to start creating it.
I’ll start with the simplest type of light, the Sphere light
I can create a Sphere Light by clicking on this icon here,
and now I can choose where I want to place it.
Enscape has a 2-click system
that helps you place your light very easily.
First you can click on a point of reference,
From there, you can move to another location
and click again to finalize it.
Pretty easy huh?
After I’ve created it,
I can set the Strength of the light
using the Luminous Intensity slider here.
The reason why you can’t see much of a difference here
is because Auto Exposure is turned on.
So I’m gonna go to the General Tab
in the Settings window, and turn that off
Now when you adjust the lights,
you will the real effect of the Intensity.
You can also adjust the Exposure Brightness here
to brighten up your scene as well.
If you have a lot of the same lights in your model,
then you can make duplicates of that light
by copying and pasting it,
or by using the move tool
and tap Ctrl to activate Copy Mode.
When you create these copies,
you can adjust the strength for one of the lights,
and the others will be adjusted as well.
A better way is to place the lights
inside components like this.
That way, when you add it to one instance,
it will also be added to all of the other instances.
Similar to the previous method,
any changes you make to this light,
will also affect the others.
The Sphere light also have the option
of adjusting the Light Source Radius
This will control the size of the light source in meters;
this is only visible in reflections such as on a mirror.
The look of the light in reflections
also depends on the roughness of that material;
the higher the roughness, the bigger the area becomes
which makes it more blurry and less visible.
That’s why for this scene,
it doesn't make much of a difference,
so I’m going to leave the radius as 0.
The next light on the list is spot light.
Unlike the sphere light,
the spot light can be placed with 4 clicks,
but it still follows the same 2-click system.
The first two clicks will determine the origin of the light,
the other two clicks is to determine the light's direction
After it’s created,
you can click this point on the arc
to adjust the beam angle,
which you can also change using this slider here.
And here you can change the strength of the light
When using Spot Lights,
you also have an option to use an IES file.
Which has a lighting profile that is
more realistic than the typical spot light.
Note that sometimes the IES light
is not symmetrical rotationally.
If that’s the case,
then you can rotate the light by clicking on this handle,
and move the mouse to the left or right to rotate it.
Rectangular lights and disk lights
are categorized as area lights
I want to place it in the center of this opening
to simulate the light coming from the other room.
First I’m going to click on the midpoint of this opening,
now I can use it as a reference
to move to the other point.
Between the first and second click,
you can use the arrows on your keyboard
to lock to a certain axis.
The Up arrow will lock to the blue axis
The Left arrow will lock to the Green axis
and the Right arrow will lock to the Red axis
I’m going to use press Up and lock to the Blue axis,
then go down here and across to the other midpoint
then finally click here to create the light
right in the center of the opening.
From there I can use the last two clicks
to choose the direction of the light.
Now I can use these points
to adjust the width and length of the light
But you can see that this is not scaling it from the center
So I’m going to press Ctrl Z to undo it.
And adjust the size of the light using these sliders instead.
This way, the light will be scaled from the center.
Note that you if you exit out of Edit Mode,
you always go back by double clicking the light
to adjust the origin and direction of it.
Finally, I’m going to adjust the strength here.
The Last light on the list is Linear Light.
I’m going to use the Linear Light
to place it outside and above this opening.
So I’m going to first click on the midpoint of this window,
and move up a bit, then place the light there.
Now I can adjust the Length of the light
using this slider here,
and adjust the strength of it here.
If you look closely, half of the light is inside the wall,
this might cause some issues in the rendering,
so I’m going to move it out a bit like so.
There we go, that’s better
You can also rotate the linear light
by first clicking on one of these dots,
and then drag the mouse left and right to rotate it.
However, this does not provide
accurate rotation to a specific degree.
For a more accurate rotation,
you can rotate lights using SketchUp’s native tools.
Also notice that the placement of your linear light
will affect where the light shines:
the light along the length are soft,
while the light on each end of the fixture
are somewhat more focused.
Now let’s get back to our model.
If you want to add color to your light,
first create a color material,
then go to that light and paint it like so.
Now any adjustments you make to that material
will be reflected in the realtime render.
Pretty cool huh?
Finally, you can use Emissive materials
to create a lit light bulb effect
You can do that by turning on self illumination
in the material editor
or by adding the keyword Emmissive
in the material’s name.
Now I can adjust the intensity of it here,
and I can also add a color for the light here.
And those are all the tips for lighting
in Enscape 2.3 for Sketchup.
Leave a like if you found the video helpful,
comment below what you want to see next,
stay inspired guys, and I will see you,
next time