Welcome to HowFixit and today I will show you how to replace a fan on a GeForce GTX
1060 graphics card To disassemble the graphics card, you will
need only one Phillips screwdriver or Phillips 2.0 if you using the HowFixit screwdriver set
You will also need an antistatic brush and thermal grease.
In the description, I left links to all the necessary tools and spare parts.
Remove the screws on the back side of the graphics card.
Turn over and remove the top panel with fans.
Put the graphics card aside, it is no longer needed.
Remove the screws that are located between the fan blades.
This connector is quite difficult to disconnect, so it’s better not to pull on the wire,
there is a risk that you can tear the wire from the connector, you can use tweezers to open it
By this part number FDC10H12S9 you can buy a compatible fan of your manufacturer graphics card
In the description under the video, left a link where to buy a new fan for the Palit
GeForce GTX 1060 DUAL graphics card Now go to
the reverse assembly.
That's all, I hope this video was useful for you, you were on HowFixit and see you next time