I'm Constanza.
I'm from Buenos Aries, Argentina.
And I'm a frontend developer at an E Commerce country from South America.
I'm part of Chica its program, we are women and we host meetups and create a platform
for displaying with women and nonbinary Devs to give them more visibility.
But now I'm here to talk about life, robots, and cats!
Three of the most popular things on the Internet, right?
We're going to see in this presentation with life and designing and it's main part.
Building the building process and potential use cases of home automation.
So, when I was a 4yearold child my family made me clean up my bedroom, put the toys
away in boxes and do the dishes.
And sometimes sweep the patio.
By then I was so angry because all I wanted to do was to play with my friends and toys.
Right?
So, I
used to have this dream that was about creating robots that could help me with these chores
I had.
But then I grew up.
And I still have chores even more than before.
And now I have two cats.
Orson and Heckl.
And sometimes they had to be they had to wait for me to be fed.
Needless to say, I rarely get home early.
If I give them the day serving in the morning, they ate it by noon and when I get home at
night, they're hungry.
So, I needed to figure out a way to give them their serving twice a day.
Right?
Okay?
And so, now I know that's why I decided to build this.
I know nowadays there are a lot of options that fill our needs.
But some are expensive, and I can't afford them.
That's the reason why I built the pet feeder.
So, then I started Googling similar projects that could guide me in the development.
I saw a lot of the examples.
Most of them were built, and the structure was just for one cup.
However, what I needed was something that could feed both cats at the same time.
Because I don't have much space in my home and because it's cheaper than having two machines,
right?
So, I knew that I will need a dispenser as a container.
Several motors to move the container legs.
And a microcontroller to run program.
But I didn't know which one.
Because there are a lot of it in the market.
So, I had to decide if I will use a Raspberry Pi or an Arduino or something else.
For some reason I thought that a Raspberry Pi would be the best option due to how easy
to work is its operating system.
So, someone lent me a Raspberry Pi which I had to configure it from scratch as well.
And I decided to use JavaScript develop the feeder because I'm learning to program with
this language.
So, I made research and found a platform called Johnny 5 that allows you to work in robotic
systems with JavaScript.
But before using Johnny 5, I installed RasPiO which is a plugin that allows you to use Johnny
5 in the Raspberry Pi.
I used packages for run for all of this stuff.
I used NodeJS.
So, the configure of RasPiO and Johnny 5 is pretty easy.
You just have to start it and acquire the module in your JS file.
I'd never built something like that and my knowledge on the subject was new.
All I know from movies that there are conventions for connecting the wires.
So, all I wanted to do was not to burn my house because it would be terrible.
So, after the setup of the Raspberry Pi, the first thing I tried was to turn on tiny lights.
And to my surprise, it worked.
So thank you.
[ Applause ] So, I got into the world of several motors
and I tried to make one work.
But that part wasn't that easy.
As I was suspecting.
So, the Raspberry Pi has a lot of pins to put the wires.
But you can't use any.
I connected wires to different pins on the server motor.
It didn't work until I found out that there are some things that need to be connected
to a specific pin.
For example, controlling the server module place.
So, to do that you need to connect to a PWN which is a pulse with modulation pin.
And the Raspberry Pi has just four of them.
So, I connected to a wire.
GPO18.
And the other wires must be connected to a 5volt pin and a ground pin.
So, during the process I learned that not all server modules are the same.
Some of them turn 45 degrees.
Others, 180 degrees.
And there's some with continuous rotation.
I used all of them until I found the one I needed.
Okay.
You know that you must consider the weight of what you want to move.
So, I had to try several modules for different weights.
My house was full of servers.
But I chose the one that can receive 3.2 kilos.
So, I'm sorry.
[ Laughter ] Yes, that was a problem.
Because I can't stop I can't make it stop the server modules.
And so, the food overflowed a lot of times all over the table.
That drove my cats crazy.
So, in fact, they heard the sound of the food getting out of the feeder and came running
to me and started meowing and at first it was very funny.
Okay.
But it turns out that to move a server motor with continuous rotation, you need to move
the blade clockwise.
So, it’s necessary to set the top speed of the server blades when you want to stop.
So, I set the feeder to give them the food twice a day.
For that I used an npm package.
You just have to set the minutes.
Every 15 minutes.
And then the hours.
That's it.
They eat at 8:15 and 9:15 p.m.
So, thanks to that, I left the pet feeder running.
And thanks to that, I realized that the feeder wasn't working properly because it was letting
out the food every hour.
So, they were crazy.
Yes.
They wanted to eat all the food they can see.
I'm sorry.
So, for I spent a lot of time trying to figure out what was the problem.
And I found out that the library, the package wasn't working properly.
So, I replaced that package for another one.
And everything was all right.
So, the feeder was almost done.
But one day my cats got up really, really early.
Like 5 a.m.
And they started mewing loudly.
I was a little bit sleepy.
And tried to get up and fill their bowls.
But I knew that if I didn't get up, they would keep crying.
And so, that was the point where I thought that I should include a new feature.
Send an email from the comfort of my bed and go back to sleep.
So, I started looking for other packages.
And by the time I felt like this little cat sticking its nose in every package, his tongue.
Until I got the right one for this project.
So, to then develop this new feature, I found this package that allows you to set up the
configuration.
It was very easy to include this package in my project.
And in this case, I wanted the feeder to start working only if I was the immediate sender.
So, this was the feeder before it became a robot.
And after a lot of time developing and testing yeah.
The feeder is called Sascha.
I finished it with this final structure.
That's awesome.
With the help of my friend because there are a lot of things that I can't do.
So, we included those.
Before that it was just one tube.
I want to say this separation of those two is made by was made by that.
So, I can say that the dream that I had when I was a child came true.
[ Applause ] So, I'm building Sascha and getting all these
made me know I wanted to do more projects involving robotics.
That there are a lot of potential use cases of home automation that I would love to implement
like controlling nonsmart things like lights or the airconditioner.
Or controlling the temperature of the room.
So, I think that it's you can build this feeder just with a little JavaScript knowledge.
It's not too complicated.
And it's a nice activity to teach you how to code.
Even if there are parts that involve not coding like building the structure and gluing pieces,
et cetera, why is it a nice activity to code?
You can teach conditionals and setting up packages and the microcontroller so you can
introducing beginners to the art of setting up their computers.
I don't know much JavaScript because I started learning to program like two years ago.
But I'm sure that there are amazing projects to be built and to be shown.
Maybe those projects can inspire others other people to the things to facilitate chores
or change how they interact with their home just with a little bit of code.
So, that's all I have.
[ Applause ]