My Name is Ahmad Shamshiri and I am presenting this tutorial from Canada.
Hi, welcome to tutorial form Robojax. in this video I'm going to introduce and how to use
this prototyping shield for Arduino. so this can go directly installed on
Arduino it can be installed directly on Arduino attached you have also a mini
breadboard that you can put your component here and make your life easy
or if you are permanently putting some component that needs constant
programming so you can solder them here and leave it on the board so you can
just program and do the other work that you want to do with this. what do we have
and why this is useful? first you can put your mini breadboard and majority of
the project that needs fewer components this will makes your life easy. so you
can do it directly here on the board as simple as that and this is their sensor
so not only we have all the original ports of Arduino we will have extra
ports here for example these are all 5 volts so you have multiple 5 volts if
you need it so you don't have to create another array of 5 volts here and these
are all of these or ground so you have 5 pins of ground 5 pings of 5 volts, plus
the 5 volt that we have here so that's the first thing the second thing the
reset button is also here so you don't have to worry about the location of the
reset button that you have so the reset button is moved and that's easily
accessible. then we have a push button here and we have two LEDs that are
available so this this push button has a pin here that you can solder a wire and
leave it to be connected to any of these pins so you can put it long enough to be
plugged in and also we have two LEDs here LED 1 and LED 2 here is a wire
they have already resistors so you don't have to do anything you just need their
already connected to the ground so you just need to connect the wires from here
and then put a wire and then according to your program connected so for example
this LED be connected with this wire here just
solder it from this side and then it's ready to be connected to any port that
you wish so that led will be turned on when when these pin go HIGH the same
thing for this led we have their pin here so you just plug it in and then
program it so 2 LED with a resistor makes your life very easy and removes a
lot of clutter of multiple connections. this reset button I just checked it in
terms of connectivity this side of really this button is already connected
to the ground and this side you can connect it here so this would be ready
so whenever you press it this wire will be grounded so when you push it
will be grounded. it comes with us with this mini breadboard it has double
sided adhesive so if you are not planning to use this maybe just remove
the adhesive and stick it here so permanently it will not move this area
also you can put a lot of other component beside attaching this and also
this is for the ICs that if you have surface mount I see you can just put it
and solder it. if you are planning to put some surface mount IC here the pins
here that it has 7 here and 7 here and total or 14 as you can see here pin 1 2
3 & 4 or here up to 7 and then we have 7 here up to 14 so but the pins are
connected like that so if I just touch this and you see one is connected here
and then pin 2 is connected here and 3 is connected here pin 4 is connected
here when 5 is connected here pin 6 is connected here and pin 7. so it's sourced
1 2 3 4 5 6 7 and here we have also the pins up to 14 so this is if this is 1 2
3 4 5 6 that's 7 and that's 8 9 10 so when it is
connected here and 9 is connected here so 8 9 10 11 12 13 14 is the last one
here.well if you need to attach some other header beside this one and if you
need another one male or female you have a room here to put it but on one side
not on both sides so you can move this here solder your header here or the
header can be soldered here. thank you for watching this was introduction to
prototyping shield for Arduino I definitely recommend this product for
your projects please thumb up 👍 the video and also share it if you subscribe I
appreciated
Subtitle Typed and corrected by Ahmad Shamshiri on April 17, 2020 in Canada.
Unfortunately 2,196,109 have been confined infected with Corona Virus as of Today in the world.
149,024 have died so far from COVID19. This is very sand I hope this is over soon.
I did my part to help you learn. Now it is your turn to subscribe and type something in the comments.
Thank you for not skipping the ads and keep watching them. This will help me a lot.