hey guys ERSBIT here samsung galaxy s20 ultra let's make this device new again we are going
to start by heating the device around the edges on the back after that use a metal tool to go
under the back cover and start to create some gap between the back cover and the frame of the
device add your second tool inside the small gap that you created you do not have to use
exclusively metal tools while doing this repair i have done it multiple times with the small
plastic tools that comes with the replacement kit so use your tools to help you cut the glue around
the edge of the device similar to most of my back cover replacement you can use the same methodology
that i use on those videos the only thing different here is that we are not going to reuse
this back cover the glue behind the back cover of this device is really thick and really strong so
use some heat if you need it because it will make your life easier while replacing this back cover
you can use some duct tape to protect yourself by applying the duct tape on the back cover
it will help you prevent the dispersion of the broken glasses everywhere you need to use your
tools on all side of the device before you will be able to remove the broken back cover entirely
use your tool to work your way around one side of the device and start to pull the back cover a
little bit to test if it's ready to pull itself fully back over removed not so fast we need to
remove a small sensor attached to the back cover this small sensor is your external microphone
and it is a critical part not so critical but it helps you record while you're filming with your
main cameras you can use some duct tape again to catch all the small particles of glasses
around the cameras that's what i am doing right now because you're going to have some
particle of glass if your camera glass has been broken and one of your cameras is being exposed
this is a good method to remove all the dust also while doing this repair this is the new back
cover that i am going to install on my device it looks similar but be careful you need to transfer
anything that you do not see on the new back cover remove the protective film so let's remove all the
camera lens coverings these have been put here to prevent the camera lenses to get some dust after
that we need to remove this small covering for the external mic and this kind of fiber like covering
since the back cover came without it i would say it is not mandatory but if you have the
capacity to remove it and install it on your new back cover you can do it it won't hurt anything
time to install the external mic on the new back cover and then you need to apply some pressure
all around the camera bump to make sure it sticks firmly to the back cover if you find these repair
videos helpful subscribe to our channel and share our content to the world before we install the
back cover on the frame of the device apply some pressure all around the tape that you see remove
the protective film on the back of the back cover and we are ready to install the new back cover
so align your back glass with the frame of the device try to not put too much pressure because
in this stage we are just aligning the back cover with the frame of the device and take your time
to look at all the side of the device to make sure the back cover has been aligned perfectly with the
frame of the device so when you're satisfied with the alignment make sure that you start applying
some pressure all around the device on all four corners of this device that will help your back
glass stick firmly to the frame of this device so after we need to test the wireless charging
to make sure that the back cover was installed properly and everything is working as it is
supposed to so i am testing my earpods and as you can see they are charging so we did a great job
the next step i applied some clamps on all corners of this device to keep applying some pressure on
the back cover for about three minutes that's it only three minutes you can remove all those clamps
and inspect your device for any misalignment thank you guys for watching subscribe like and share