Use a combination spanner No.16 Use a drive socket No.15 Unscrew the stabilizer link upper fastening
Use a drive socket No.12. Use a Ratchet wrench. Disconnect the brake hose holder from the shock absorber strut
Use a flat screwdriver. Disconnect the ABS sensor cable fastener
Use a combination spanner No.17. Use a drive socket No.21. Unscrew the lower fastener of the shock absorber strut
Disconnect the steering knuckle from the shock absorber strut
Use a flat screwdriver. Unscrew fixing bolts of the protective cover
Use a combination spanner No.18. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount
Use a combination spanner No.17. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount
Before installing a new shock absorber you should pump it manually 3-5 times
Use a combination spanner No.17. Use a HEX bit No.H6. Screw the top fastening of the shock strut mount
Tighten the shock strut top mount. Use a combination spanner No.18. Use a HEX bit No.H6
Install the protective cap onto the shock absorber strut mount
Tighten fixing bolts of the protective cover
Install the steering knuckle on the shock strut and tighten it. Use a combination spanner No.17. Use a drive socket No.21
Connect the brake hose fastener to the shock absorber strut. Use a drive socket No.12. Use a Ratchet wrench
Connect the ABS sensor cable fastener
Tighten the stabilizer link upper fastening. Use a combination spanner No.16. Use a drive socket No.15