- [Instructor] In this video,
we're gonna dig a little bit deeper into distillation,
and in particular, we're gonna learn how to construct
and interpret distillation curves.
So let's say we're trying to distill roughly 50 milliliters.
That is 50% methyl acetate and 50% propyl acetate.
If you don't know what methyl acetate or propyl acetate are
not a big deal, but what's interesting
is the difference in their boiling points.
The boiling point of methyl acetate is 56.9 degrees Celsius.
While the boiling point of propyl acetate is a lot higher,
101.5 degrees Celsius.
And so you can imagine,
as we have this fractional distillation setup,
we're going to be able to separate these quite readily
because of those differences in boiling point.
So what you do, you have the solution,
you begin to heat it up.
Now you're going to have to heat it up
to the boiling point of the mixture,
which is going to be someplace in between
these two boiling points.
It's probably going to be 70-something degrees Celsius.
Now once you get this thing boiling,
you're going to start having a lot more vapors form.
Now those vapors are going to be a combination
of methyl acetate and propyl acetate.
Because methyl acetate has a lower boiling point
than propyl acetate,
a disproportionate number of those vapors
are gonna be methyl acetate.
And then, because this is fractional distillation,
that mixture of vapors is going to have multiple cycles
of condensing and then revaporizing.
And as we get higher and higher,
every time you condense and then revaporize,
those revaporized vapors are going to have
even a higher proportion of methyl acetate.
And what you see
as you gradually increase the temperature here,
you're going to have this condensation ring,
and you can view that as the boundary
between where it's hot enough for enough vapors to form
and where it's not hot enough
for enough vapors to form and they condense.
And so when this temperature is having fairly low readings,
maybe right at the beginning,
you're not going to be generating a lot of distillate.
You're not really gonna be generating a lot of distillate
until this condensation ring gets pretty close
to where the bulb of this thermometer is,
and those vapors can start entering
into this condensation tube.
And now you can imagine by the time
that the ring gets up here, that means that the vapors,
the mixture of vapors,
have had multiple cycles of condensation and vaporization,
which is equivalent to multiple simple distillation cycles.
So by the time the vapor ring gets up here,
we're going to have mainly methyl acetate vapors.
And the temperature here,
the boiling point of the vapors up here,
are gonna be roughly the boiling point of methyl acetate.
But that's the point
at which you start seeing a lot of those vapors
being able to enter into the condensation ring
and get condensed,
and we're starting to produce a lot of distillate.
So right at around 56.9 degrees Celsius, roughly,
we now start producing a lot of distillate.
Now you can imagine the whole time we're doing this,
you have to slowly increase the temperature of the mixture.
Why is that?
Well, as we start losing
more and more methyl acetate vapors,
then the boiling point of the solution is going to increase.
As we said, this original solution's about 50 milliliters.
So once you get about 20-something milliliters
of your methyl acetate distilled,
you are not going to be able to produce
a lot more distillate at that temperature.
You're gonna have to keep increasing that temperature
until the bulb here gets to the temperature
of the boiling point of propyl acetate.
So the temperature of the bulb keeps increasing.
You're not seeing a lot of new distillate,
maybe a little bit more form,
and you are getting more and more of the propyl acetate.
So this especially is going to be a mixture of vapors.
You're kind of getting the last of the methyl acetate,
but you're getting an increase amount of propyl acetate.
But once you're hot enough
at the boiling point of propyl acetate,
so about 101 degrees Celsius,
then you start producing a lot more of your distillate.
And this is essentially the condensing vapors
of propyl acetate.
And so if you wanted to separate these two,
what you would do is, in this first phase,
when you see this plateau
and you're seeing a lot of this volume happen
at the boiling point of methyl acetate,
you could have one little tube here or one little jar,
and then you can swap them in this phase.
Before you raise the temperature too much,
you can then collect the condensation
of the propyl acetate.
Now you can also go the other way around.
People will oftentimes present to you a distillation curve
that looks something like that.
And they might say, okay,
what were the boiling points of the constituents there?
And you'd say, okay, well the lower boiling point substance,
I can see that right over here.
We were able to get a lot of distillate
when the bulb right over here was at that temperature,
so that must be the boiling point of substance one.
And you might even be able to identify it
if you know the boiling point of different substances.
And then you would identify this plateau
as the boiling point of substance number two.
So some of you all might be thinking,
this is all good and well for fractional distillation,
but what would simple distillation curve actually look like?
Well, remember, in simple distillation,
you don't have multiple cycles
of condensation and revaporization,
which is equivalent to multiple cycles
of simple distillation.
So when you're hot enough for the vapors to get up here,
it's gonna be less pure methyl acetate.
It's going to be a combination of the two.
It still will be disproportionally methyl acetate,
but the boiling point of that combination of mixtures
is going to be higher.
So what happens
is that you start getting significant distillate
at a higher temperature
and the whole notion is just a little bit more gradual
when you're doing simple distillation versus fractional.
And you could imagine if someone were to present
a simple distillation curve like this,
it's much harder to pick out the boiling points
of the various substances, because at any given point,
you have more of a mixture of vapors
than you do when you're doing fractional.