What's up guys, welcome to another video here. My name is Jonathan from mixnotes.tv.
I have a Youtube channel, you can go check that out if you want. Regardless, I'm here
to show you a little trick with the drum buss to sort of break down what I do. I get a lot
of questions about drum compression, and if I need huge drums, do I need to use tons of
compression and slam the drum buss and stuff.
I've got a track here that's very dramatic, I'll play it here for you in a second. I'm
going to break down a couple plug-ins that I use on my drum buss, and hopefully you guys
pick up some tips and tricks.
Anyways, let's get into it, the track sounds like this.
[music]
Alright, so really big, super dramatic, real spacey. Here is on the chorus, the solo drums.
[drums]
Right. So, got my drum buss here. We've got an EQ, I've got one compressor, and I have
a tape emulation plug-in. So, that's obviously the finished product. If I bypass everything,
you get this.
[drums without processing]
Right. Still really big. I will say as far as compression goes on kicks and snares and
stuff, I don't really use tons. I mean, obviously with a track like this, I've got multiple
kick drums, multiple snares, claps, percussion stuff.
I run a lot of stuff in parallel, and I use a lot of 1176s because I like them. So things
that will get smashed extremely hard are these parallel compression busses for snares and
kicks, and then they sort of get blended up. But other than that, nothing is really going
beyond 3-4 dB of compression, but I just wanted to make a little side note there.
Anyways, back to the drum buss. First thing we do, Pro-Q2 EQ from FabFilter, everyone
is ranting and raving about this thing because it's awesome, and this is what I do to the
drums. I do a little high passing. 37, just to clean up some of the super subby subby
stuff. It's not a hip-hop track, so I don't need anything down there.
Not a ton of stuff down there, but at the same time, there's a lot of kind of pillowy
sort of sub stuff if that makes sense. I usually find success with notching out a little 300-400
somewhere. In here, I've got 338. Then I'll also shelf on the top end around 10k. Keep
in mind, all these moves are really subtle. These are a dB and a half, 2 and a half dB
here... So let's do an A/B here on the EQ moves.
[drums, before and after processing with Pro-Q2]
Right. In that 338 dip does a lot of what you're hearing. Let me bypass this band. I'll
turn this on and off.
[drums play, before and after 338Hz dip]
Right. And then the top end, you just get a little bit of that air for the cymbals and
whatnot. The real kind of ticky clicky stuff from the sticks and snares.
[drums play, before and after high shelving EQ]
Right. Again, subtle moves. So that's our EQ, nothing crazy.
Then I go to Shadow Hills Compressor. I dig this thing, but I only really dig the discrete
side of it, and I also use it in dual mono. I don't know, that may just be me being crazy.
I'm not a real technical guy, I just kind of mix by feel and emotion and all that, but
I feel like in dual mono, it gives each side of the stereo field – especially with drums
like this – they're not always completely symmetrical all the time, so it sort of gives
the compressor freedom to compress and move as it needs to between the left and right
speaker.
With that said, you can check out the settings here, and I'll play it and I'm just going
for a little point, and again making the drums a little tighter, a little more aggressive.
Not a ton of compression.
[drums with compressor]
So that's with. I'll bypass it. This should be level matched fairly close.
[drums with no compressor]
Things just get a little more punchy. I think my ratio is around 3:1. The recovery time
is pretty quick, attack time is pretty slow, so it's got time to let those transients through
and give you the punch and the front end you want.
So, that's compression land.
Then I used this Studer from UAD. This is one of my personal favorite tape plugs. And
again, I've got it set up where it's fairly darkish. Again, TP9 tape, 7.5 calibration,
7.5 IPS, not really running it too hard. Check it out, it sounds like this.
[drums]
If you guys want to check out the biasing controls, that's how I have them set up.
[drums]
And, yeah. I mean, that's it. There's not a lot to a lot of this stuff. A lot just comes
from using the right samples and just gain staging and balancing the tracks to sound
huge when they need to, as compared to other tracks and sounds, so.
Anyways, I hope this was helpful to you. Again, you can check out my YouTube channel, there
will be a link below. Mixnotes.tv, I've got a bunch of stuff over there.
I'll play this with the track one more time and get out of here.
[song]