Welcome to Sage Audio. Today let’s talk about How to Mix with Free Plugins. But first,
If you have a mix that you need mastered,
send it to us to receive a free mastered sample of it with the link in the description.
Balancing Low End
For this mix, the first thing I want to do is balance my low frequencies,
since I have a lot of them. To do this I’m going to use an EQ on my Drum Loop, 808, and synth,
and attenuate aspects where they aggressively overlap.
On the drum loop, I’m going to attenuate 47Hz where the 808 is going to be - I’ll
also attenuate this frequency on the 808 since it’s a bit too strong, and gradually reduce
the harmonics of this frequency to reduce the psychoacoustic amplification of this fundamental.
For the synth, I’ll use a gradual 6dB/octave high pass,
attenuate the fundamental, and some harmonics as well.
Let’s take a listen to how this reduces masking and overbearing frequencies in the lows.
Controlling Low-End Dynamics
The next thing I want to focus on is the dynamics of my lows - so I’ll compress
the 808 and synth using the drum loop as the external side chain.
This way whenever the kick of the drum loop hits, the 808 and synth are reduced, making more room.
This is similar to what we did the last chapter, but instead of equalizing to create room,
we reduce the overall amplitude with compression to make room. Let’s listen to it.
If you’re enjoying the video, hit the like button; it helps us bring you more videos
Equalizing the Vocal with MEqualizer
With the low end more balanced, let’s start focusing on the vocal, first by gradually
attenuating lows with a 6dB/Octave low pass, and then dipping some mids. I’m also going
to subtly increase 3.5kHz to add clarity and presence to the vocal, making it stick out.
Let’s listen to how this makes the vocal clearer, and more prominent.
Bringing the Vocal to the Front
With a compressor, I’m going to expand and compress the vocal to get as much detail out of it
as possible. Using MCompressor, I’m going to set a 1ms attack, 1ms release, and then select custom
shape, with which I’ll increase the level of the quietest details, before soft-knee compression.
Lastly, I’ll increase the output to make up for the attenuation. The fast attack
and release are causing more signal to be captured by the compressor, which is then
made up for via the output, while the low-level expansion is bringing quieter details forward.
Let’s listen to it.
Only a small percentage of people that watch our videos are subscribed, so if
you’re enjoying the video consider subscribing. It’s free and you can always change your mind.
Saturation on Low-End Instruments
Saturation is a great way to fill out a sound, and also create space amongst multiple instruments
by emphasizing different harmonics. For the drum loop I’ll decrease the 2nd harmonic, but
increase the 4th, while for the 808 I’ll do the opposite - further separating the 2 instruments.
For the synth, I went in a different direction and emulated FET saturation
with the free plugin PreFET. Let’s listen and notice how the lows become more complex
but don’t conflict with one another.
Saturation on Vocal
When saturating a vocal, we can use harmonics to achieve specific characteristics - for this vocal
I decided to emphasize the 2nd order harmonic, to make it have a warm and full sound. I then
blended in the effect with the wet/dry and lowered the output to compensate for amplification.
Let’s listen and notice how the vocal is fuller.
Saturation on Supporting Instruments
Next, I took a look at the supporting instruments - first I equalized them by reducing their lows
and emphasizing high frequencies to add clarity. Then I saturated, meaning I drove frequencies
that I amplified with the EQ into the saturator - giving the instruments a more unique timbre.
For the saturation, I simply did what sounded best, but made sure to vary
their harmonics so they didn’t overlap and lose their identity. Let’s take a listen.
If you're enjoying the channel, use the search box to watch more of our videos.
Sound Delay on Supporting Instruments
To affect my stereo image I used the Voxengo plugin Sound Delay,
and changed the routing to dual mono. Then on both of my supporting instruments,
I delayed one channel by 5 to 10ms to cause phase cancellation
and subsequent stereo widening - placing the instruments far left and right.
I found this made the instruments more interesting, but more importantly,
gave them some space by moving them out of the busy center image. Let’s take a listen.
Slapback and Reverb on Vocal
For the time being, I’m done with the instrumental, so let’s look at the vocal - using
2 instances of Valhalla Supermassive, I’ll first double the vocal with a quick,
1/64 note delay, and then reverberate it with a 1/16th note reverb.
The plugin can be a little difficult to use, so I started with the preset
WaveDelay on the vocal then altered the mode, mix amount, delay length, and more.
Similarly, I started with Reverb2000 and changed the settings to better fit the song.
Let’s listen to how the delay thickens the vocal, and the reverb stylizes it.
Drum, INST, and Vocal Bus Processing
Next, I’m going to create busses where I can process similar groups of instruments - I’ll
start with a drum bus, then an instrumental, and then create a vocal bus. On these buses,
I used the Slate Digital Fresh Air plugin, which brightened the sound of each.
I find that using this plugin on these signals separately instead of
on the master output benefits the sound and gives me more control.
Then I blended the levels of the busses with the channel faders. Let’s take a listen.
Demo Mastering with Free Plugins
Last up I’m going to create a quick demo master in case I need to show someone the
track - I’ll first insert RareSE by Analog Obsession on my stereo output. With it, I’ll
switch to mid-side more and de-link the channels, before attenuating the side’s low frequencies.
This will make the kick and bass more mono,
and center - then I’ll boost some of the highs to cause high-frequency stereo expansion.
Lastly, with this plugin, I’ll subtly boost the kick on the mids, and some of the presence.
For a limiter, I’ll use LimiterOne by
CISDSP Factory and reduce the threshold to enable limiting and auto-make-up gain.
Let’s listen to the track and enable these 2 settings,
and notice how it creates a decent demo master.
If you have a mix that you need mastered, send it to us to receive a free mastered sample of it
with the link in the description. Thank you so much for watching.