Hello folks Kirk and jason with Kirk Giordano plastering today we're going to show you how to
get behind in this column now the homeowner and the contracts to cheat Kirk how you going to get
behind this column I said well I'm gonna bring a spatula I'm gonna put the mud on the spatula and
put it in there and say really I said no man I'm just kidding I'm gonna show you guys how
are we getting here because I've been asked this question quite a few times and I got the columns
they're close to the wall or how do you get him back of Pilar's columns where that you don't have
very much space I'll show you about five different ways guys because I can do it with almost any tool
necessary I was thinking about taking my boot off to show you with my shoe but I thought that'd be
really obnoxious so right now what we're doing is putting this thing together we're running out of
daylight it's cold and I'm thinking man we just got a little bit of time left before it gets dark
so we're trying to wrap it up but I left this one pillow here at end of the day stuff I'll show you
guys okay how do you get behind here now we got eight inches behind here we got we're gonna go
from both sides that's how we're going to get behind it now I could use a 16 inch chop or I
can use a 20 inch try I could use my handy dandy patty-cake treatment trial I mean that that work
I could use a margin trial I could use almost any tool there is guys I'll show you first with a 16
inch chop now 16 inches you see where we have our rivet here so what do we have we have four inches
right from this rivet here to the top now say for example I put a little bit of mud here I go
four inches on this side four inches four inches see that and I just it's one step at a time guys
four inches just like that and you do both sides okay or if I want to go even further this one is
about an extra half-inch because it's a 20 inch trial now same same thing applied I will put it
on here and go inside now I'm gonna hit this from both sides now I'm hitting this side and
I'm going all the way in there and the reason I got my Darby stuck on the wall there is to show
you guys another way to do it too I'll get to that in a minute okay that looks that'll that'll
do one side like this and if you're not certain cheers not enough mud well put some more start
at the bottom work your way up put another hock full to hot Falls does it matter but you've got
to fill it up when I'm done that's supposed to be one inch between here instead instead of the
three we have we have the solid inch here and we got to put a solid inch back here there should be
about an inch give or take a little bit not a big deal so again we're putting it on and this is only
one side I'm not going to show you the other side because that's I'd have to stop what I'm
doing here and walk over there okay now that's the wall that's the easy part how do you get
though the pillar here which you can't see I'll show you alright if I'm going to use say if I'm
gonna use my 16 inch chop because what imma do guys I'm gonna use the backside and where this
rivet is that's where I stop I'm gonna put it here tap it tap it why because the centrifugal motion
it stays on guys it stays on but if I don't tap it what happened well don't tap it slides off so you
hit it tap it that'll hold on to it a little bit tighter okay now that we held onto a little bit
tighter this is slow guys there's a slow going and you have to stop at the rivet so just to show you
guys tap put it here come up tap put it here come up this is pretty slow it's pretty messy good day
I put this pillar next to the wall yeah that'd have been too easy okay tap it a couple times
and just keep going up just like this all right now if I wasn't going to use this the 16 and I
go with the 20 it's actually easier because now I'm using this rivet as a template I'm coming up
tap here and the rivet stops it the rivet hits the this rivet here hits the corner age you tap
it you come here and go up if I'm going to use a margin child which you can use a margin child two
guys but it's just too slow a margin child you're going real slow and of course these margin shots
come in 2 inches 4 6 10 12 so I got long ones to go and put it here and the same applies guy yeah
if for example you're putting it on a margin child you're putting it on the margin child and you put
too much when you you put say like you can't go crazy if you put too much you got to turn the
bone it falls off before you can get it there you just put a little bit tap it now it's going
to stay the center vehicle more movement while it's on there it'll go but if you stop say you
go and you stop you go too slow what happened okay you see how that's that's sticking on there right
there but if you don't if there's water on this trial it's gonna slide right off right now I got
a good mix okay you come put it here and get it on there you tap it tap it tap it and that
what's that tapping motion do I get in there it holds it on there a little bit tighter so that
I can get in there there another way to do this actually is about 10 or 15 different ways I'll
show you two more now this particular trial here wet it so it'll slide right off now I'm
gonna put more and I got tap it a couple times slide it in there go up slide it in there go up
it's kind of time-consuming but I don't know of any other way to get it in there now this
Darby here we are I have Darby's on my truck about five or six of these now what I have is
one Darby without a handle so this handle is gone and what I do is I slide this in there
and I take J hey throw a bunch of mud back here he throws a bunch of mud on here like like so I
mean there's so many different ways to do this guy's I mean get and you just bring it up that
is another way to get the mud in that tight little crevasse anyway I thought I'd show you because the
contractor was saying cheat Kirk I don't see how you're gonna get behind there and I said
whoa I wouldn't have to get behind now if you put the pillar to the wall we're gonna finish this up
that is what it's going to look like when we're done we're still I haven't even floated that wall
right there but again we are we're still trying to get this done before before dark we got about
an hour or left anyway thought I'd show you that because a lot of you guys say gee how do you do
this and how do you do that well that's just how we do it there's a lot of different ways anyway
guys my name is Kirk juice and under camera we thank you for watching and as usual we'll see
on the next one once again folks we thank you for watching and I really enjoy all your comments if
you guys like this video please click the like button down below and also if you enjoy what we
do subscribe to our channel so we can keep making these videos for you my name is Kirk
and Jason we thank you for watching and from the entire giordano family we'll see on the next one