- Yeah, what?
(balls shooting)
(inaudible)
- Welcome back to "What's Inside."
Today,
we have these awesome Nerf guns.
- These guns are really powerful.
This is a Nerf Zeus MXV-1200.
The reason why we like this gun
is because it's showed that it shoots
up to 30 miles an hour.
We're going to open this on up
and see if we can have ourselves a little battle.
We brought our friend Easton here.
Let's open this box
and have a little fun with this thing
before we take it apart
and see how these things work.
- Let's go.
(upbeat music)
- Let's see who can shoot it the farthest.
(shooting noises)
- So there's Lincoln's ball,
here's Easton's.
Lincoln's went further by fifteen feet.
I measured it out,
75 feet,
kind of into the wind a little bit.
That's pretty impressive what this
little squishy ball can do.
I'm going to see how powerful these guns really are.
Go ahead, boys.
(gun motor sound)
Watch with the groin shots.
(laughter)
- Summer battles are fun,
but winter battles are even more fun.
(laughter)
(screams)
- We're going to see how far into the snow this bullet
will go if you shoot it into it.
(gun motor)
- Whoa, that's deep.
- That's pretty deep.
I can't even see it.
- Where did it go?
- Get it out of there.
Oh, there it is.
- I stepped on it.
- It does take batteries.
A lot of batteries.
There all back here in the back.
You have six C batteries that go in there
and so that's what powers it
and gets it to work.
You put those in,
you screw it on,
then this is where the bullets all come out of
this plastic area.
As you can see,
it comes out of there
and it has a spring that loads it.
One of the cool things about it is it has this window
right here.
This right here is what gets spinning,
that's what that noises that you hear.
When that spins,
the bullet,
when you pull the trigger,
it goes into that
and it shoots it out at that high speed,
it just propels the bullet through.
I want to try to cut it
and see if it can still work
and cut out a bunch of parts to it.
(uptempo music)
(hammer banging)
Ah ha.
That's how we do it.
Ah ha.
Modified gun,
check that out.
I cut the top off
and modified it.
What I want to do,
I want it to still work with these batteries.
Let's see.
Put these guys back in.
- That will be so cool if it works.
- Man,
that's what I'm hoping for, yeah.
- Yeah,
can I shoot?
Not me.
(shoots gun)
Ok,
yep, it works.
- Yes.
What should we do next?
- Cut this part out.
Like this.
- Down in here so we can see how it works.
That's a good idea.
Alright,
I will give it a shot.
Check this out.
Check that out.
- Whoa.
- I did not expect to see that much stuff in there.
On that side.
- Whoa, that's a lot just for a gun.
- This side has a little gate that opens up.
Turns out,
that's where all the wires come in that kind of cut
into that chip board right there.
My suspicion is,
it's not going to work anymore.
It doesn't work.
I'm curious, though,
is it both the top and the bottom.
Oh,
it's just the top.
I don't know if you can see that in there,
but if you look in the top,
just as you spin it,
this wheel right here is still spinning,
but this one down below is not spinning anymore.
Watch this,
I'm going to shoot Lincoln,
let's see how powerful it really is.
(gun noises)
(laughter)
- What in the world?
- Look how weak it is.
- It barely comes out.
- It still works.
Kind of,
not really.
Not going to win you any fights in a gun battle,
but at least we know what's inside of this thing.
For the red gun,
we're going to do it a more of a sensible way,
not really the what's inside way
where we cut stuff open.
- Yeah.
- I unscrewed all the screws,
there's about 15 of them on here.
There they go,
the last remaining ones.
Let's just take it apart
and see how it looks inside.
- Whoa
- Look at that.
Check that out.
There's the inside of the gun.
Split right in half down the middle
and this shows the two different motors that are on there.
The ball is down inside of there,
you can see where it shoots through.
Here's where the battery goes up on the top.
In order to get this gun to work,
first thing you have to do is pull on this right here.
You can see what that does.
We had a lot of fun with this from the summer
the fall,
now the winter.
it's sad to see this one go.
At least we have this one we can put back together.
We had a good time with it,
i hope this was insightful for you.
There were a lot of you that recommended
that we cut open a Nerf gun.
A lot of them said,
"Don't just take it apart with the screws,
actually cut the thing open."
So,
we gave you a little bit of both.
We cut it open
and we took it apart to see what's inside.
- If you have suggestions of what we should cut open next,
leave them in the comments below.
- Make sure to follow us on Instagram.
To make sure that you keep up to date
with the things that we're up to
and what we're cutting open next.
(uptempo music)