Welcome to 2019 Blade show. I'm going to be going through some of the new reveal
products that Spyderco is showing here at the Blade show. The first one I'm going
to go through is called the Harrier - the Harrier - was an older design. One of
our original Byrds was the Harrier stainless model wooden handles much
different in its design. So this one comes with screw together construction
it's a g10 handle but the the design concept of it was to be in that middle
size between the Meadowlark and the Cara cara. The Meadowlark and Cara Cara are
some mainstays in our bird line and this is a nice middle size to it and so it's
going to have a lot of the features at the Meadowlark and Caracara have. It's
going to have a nice four finger choil it's going to have an easy back to close
with one hand. You can also open it with one hand with that nice byrd commit
hole. The full flat grind it's got a screw together construction with the
four-way clip. The g10 on the Harrier 2 is a little bit more aggressive than you
find on the Cara Cara and Meadowlark. A little bit coarser it's got a full back
spacer so that you have some nice weight. Stainless back spacer it's all the way
through and then it has some nested liners that that clip screws into. So
it's going to give you a lot of value. 8CR13MOV chinese-made the Harrier 2.
great addition to the bird line and along those same lines of that middle
size we have the endela coming out. the endela is like the middle size between
the Endura and delica so if you know the Endura and Delica which are again some
mainstays for Spyderco made in Japan. That endela is right in the
middle and so this one has a lot of the same features you see on the endura and
delica. It's got a great guard in the front so you're not going to slide up on
it the ergonomics are wonderful on the endure and delica and same on the
endela comes with a bi-directional texturing and a four-way clip screw
together construction full flat grind the tips a little bit rounded out here
so you get a little bit more strength and its construction and working ability
it's wonderful in vg-10 and so the Endela is gonna bring a nice
middle size to that endure and delica family and so we're excited for the
endela. staying along that same line of light weights we've gone to a new police
for lightweight this is going to start in VG10 I'm sure that there'll be other
Steel's that come with it comes with a great forefinger Troy you're gonna see
you get a lot of handle there it's gonna fit the hand great you can choke up on
it you can back back down on it the locks nice and secure it's got a got
great jimping for both the four finger choil and the thumb the construction on
the lock is wonderful and as far as its strength and its functionality its
four-way clip and screw together construction the Spyderco bi-directional
texturing that fullback spacer that goes all the way down it but for working
ability and a little bit larger knife that police four is going to be a great
addition to our lightweight series and then we're taking me and the dragonfly
to and we're making a few different blade shapes to this one this is going
to come with a wharnclife and an Ernie Emerson opener version the wharnclife
we're very proud of our wharneclifes as far as how flat and the edge angles
and the sharp tip the way that the blade fits in there if you're a wharneclife
fan Spyderco makes wonderful wharneclifes this comes with that reversible
deep pocket wire clip bi-directional texturing this one is right at about two
and a half inches it's got the forefinger finger choil so that you can get all
four fingers on a two and a half inch folder that's one of the things that
makes the dragonfly so popular that two and a half inches it's a great easy
carry it's easily functionable you can get all fingers on it it's got a great
lock for strength to get a knife this functional on a small package gets
complicated but then with that Ernie Emerson opener this also works great so
that tip up grabs well if you're looking for a smaller knife for that emerson
opener this is this is a great find especially with that lanyard right up
there at the top if you want to use one of those for the draw as well but this
is a fun carry if you're looking for that emerson opener and a two and a half
inch folder. and then along the emerson opener we are going to have a cara
cara emerson opener and again with this emerson opener it's got a lot of hook
there it's gonna find its way on the pocket it's gonna open easily and it's
going to be a nice quick draw it's gonna have the same features as the Caracara
the bi-directional texturing to screw together construction the four-way clip
the full flat grind the by the floor finger choil
a lot of those attributes that just make a Spyderco a great carry piece and so
the emerson open emerson opener Cara cara is also coming as well and then again
we're still staying on some light weights here this is the lightweight
sage. it's a sage 5 compression lightweight so
it's got the nice compression lock there with this one you're gonna get liners
that go all the way around this full profile but nested and it's on both
sides so it's the liner goes all the way down through past all the screws and
back up and around on both sides nested and keeping it thin which is going to
give it a little bit a good weight and give it a great action it's also got a
deep pocket wire clip nice lanyard hole s30v but if you're looking for a another
compression lock and a lightweight package which there aren't many of them
the sage 5 is going to be a great addition to the pocket as well these are
some of the newer knives that we're revealing here at blade show I also am a
big Bali-Yo fan so we have the Bali-Yo wing that's where the the body wings out
a little bit it's got some slots in there so that you can grab the slots for
some better purchase with the bali-Yo the weight is drawn to the end the weight is
turned into ring so you can use the Rings for tricks and for balance that
has clips so that you can easily clip it to the pocket those clips are also
removable if you need to get them out of the way to use the pen you just screw
out the end you typically write like this but the the new colors and the new
shape of the ball yo wing is fun so this is soon to come out to we're gonna be
expanding our culinary line here at Spyderco so we're gonna be making some
more Japanese models but we're also going to be making some new American
models so this is an American kitchen knife that we're producing this is
coming in 50,000 BD1N is going to give you great corrosion resist
it's going to stay sharp a long time we're really excited for this thin Biddy
one end when you start to get into these blade Steel's getting this thin gets a
little challenging so the bd1n get you that edge gets it thin we're gonna make
it with a pointed version and a blunt version and so you can go with either
either one and then when you do choose a tip or a blunted version they come in
also a uniform serration or kind of that two or three steps duration
I'm preferring depending on which style you want to cut with so they both come
tipped and blunted plane and serrated they come in green black red and yellow
as you can see here another one of the things that we're excited about is these
handles these handles are molded right on to the blade your seam lines the
cleanliness and they handle is excellent in its quality it's not going to be
coming off it's not going to be deteriorating on you it's got great
grip for the hand it's really nice and light also with this Z cut that's what
we are calling them as Z cuts it does bring that that edge down so you can get
a little bit closer on the on the cutting board or whatever you're cutting
it fits the the table a little bit better so we are launching into the
culinary line with the Z cuts as one of the additions to the Spyderco brand and
I hope you can enjoy some of these american-made kitchen knives I hope you
enjoyed some of the product we're revealing here at blade show and thanks
for spending a few minutes with me