Hello guys, welcome to Tenorshare channel.
Do you know how annoying it is when you see your iPod touch stuck on Apple logo?
You must be very frustrated when you have some spare time to listen to some music, while
your iPod touch just ruins your mood.
What’s worse, if you don’t have backups and some important pictures and other data
are erased…
OK stop there, you don’t need to experience that.
In today’s video I will guide you to gain a basic understanding of the issue and provide
three methods in detail to fix the problem without losing any data.
Possible Reasons that Leads to iPod touch Stuck on Apple Logo
When updating iPod, the update may fail to complete.
In such a case, when you try to restart your iPod, it will get stuck on the Apple logo
and becomes disable to restart.
Some iPod users will have a jailbreak in order to gain more control over their devices.
If the process cannot finish normally, iPod is likely to experience a death screen where
the device gets stuck on the Apple logo or a white screen.
Hardware problems may likely cause your iPod’s inability to start and end up getting the
device stuck on the Apple logo.
You may also meet the issue especially when the backup process runs into some unexpected
problems and fails.
Now that you have known the reasons of the issue, let’s go ahead to fix it.
Fix 1: Force Restart (No Computer) You can force restart manually.
For iPod touch 7th generation, press and hold the power and volume down button at the same
time, release them when Apple logo appears.
For iPod touch 6th generation and earlier, take my iPod touch 6th generation for instance,
it’s press and hold the power and home button at the same time, release them when Apple
logo appears.
However, sometimes this method fails, so we will move on to a better method.
Fix 2: Repair iOS with ReiBoot Before you start, you will need to download
ReiBoot from tenorshare.com first.
The link could be find in the description Below.
Launch ReiBoot, connect your iPod to your computer.
Press and hold the power and home button simultaneously, keep holding the power and home button until
you see the connect to computer icon.
Next, go to the iOS System Repair section, tap start.
Choose standard repair, it says that the repair can fix the stuck on Apple logo issue without
losing any data.
That is what we need.
So click standard repair now.
Then ReiBoot will provide you with proper and latest firmware for your device.
Hit download to continue.
Once finished, we can start repairing.
Make sure your iPod stays connected and wait for the process.
When it completed, your iPod will be back to normal.
Fix 3: Update iPod using iTunes You can also use iTunes to fix the issue.
Launch iTunes, connect your iPod to your computer.
Then put your iPod into recovery mode as we mentioned just now.
Press and hold the power and home button simultaneously, keep holding the power and home button until
you see the connect to computer icon. iTunes will then detect it and tell you to
update or restore.
We need to choose update at this point, because restore will erase the data in your device.
So we click update, then choose update again to confirm.
iTunes will start downloading the firmware.
Once it completed, you can proceed to update.
If for some reason the update fails, iTunes will suggest you to restore.
However, this will cause all your data loss during the process.
So you might need to back up first before choosing restore.
Well done.
You won’t feel worried when your iPod touch gets stuck on Apple logo next time.
You may use any methods you like to fix the problem.
If you find this video helpful, don’t forget to give us a thumb up.
I will appreciate it if you subscribe.
Thanks for watching.
See you in the next video.