hello my name is Jason Johnson and thank you for watching my videos I hope
they're helpful for you and if you have any questions or feedback you can leave
a comment below and I do appreciate the interaction that you provide or if you
have questions I'll try to get back with you as quick as possible
okay well this video is going to be how do you update your iOS on a switch or a
router in packet tracer I am using packet tracer 7-0 if you go in here and
do that I'm using the 7 7 X version here and let's just say for example that
we're working with our packet tracer and I go in here and I want to put a new
switch in and I'm gonna do it 29 60 and I go in here and I check this and I look
at my command line and it's booting up I noticed that it's got the 12 X or it's
got the 12.2 iOS version well I want the newer version on there I want the 15 X
so what I'm gonna do is I can just go ahead and leave this switch up and
running and I'm just gonna minimize that there well what I'm gonna do is I'm
gonna come in here to end devices I'm gonna click on generic here on the
servers and I'm gonna drop a generic server out here and the great thing
about packet tracer is if we go ahead and click on that server and click on
services and then go down here to TFTP services the TFTP service you'll notice
that we've got some different files on this TFTP server and the service is
turned on so we can connect to it and do that but if I scroll down I'm gonna see
some 29 sixties here and I'm gonna see 3 versions here and I'm gonna see the 15 X
version here and I want to be able to put that on my switch so what I'm gonna
do is I'm gonna open up a notepad and if you've noticed here I've already typed
it in so save some time here but I do 229 60 - landbase k9 - MZ dot 150 - 2
dot se 4 dot bi in so I'm just going to type that in there's not a real easy way
to copy and paste that I was or what wish there was but I'm just gonna type
that in I'm gonna minimize that for now and now I'm gonna come over here to my
desktop area I'm gonna go to my IP configuration I have to put an IP
address because we need to connect to that service and so I need an IP address
on there so I'm just gonna do 192.168.1 we'll just do that one i2 168
10 we'll leave that as a slash 24 because we don't need to get fancy with
our subnetting and we don't need this service anymore so we're just gonna go
and close that window down and then we're going to connect these two with an
ether with a copper we're on our etern ed here so we'll go fastethernet zero on
that side and we'll just do the fastethernet 0/1 on that side and if we
fast-forward time our line comes up and it's running and now we are ready to go
in and put our IP address on our switch so we want to come in here to our
command line and we're gonna go ahead and here we're gonna say enable and then
we're gonna do config so we can get into configuration and
then we're gonna configure our interface vlan1
and so we're configuring our VLAN interface one now and we're gonna put
our IP address on here so and let me wipe this out so we can see that here so
we're gonna do IP address and we're gonna do 192.168 and we have to have it
in the same subnet so we're in do ten dot let's just go input not one on this
one even though it's not a gateway we're gonna we have just a switch on there and
then we have to put our subnetting on there so our slash 24 so those can see
each other so that's zero we're gonna do no shutdown so that it changes to a
state of up and then we're gonna do exit and now what we can do is if I we can we
should we might want to ping ping that just to make sure that that's up we
could do that if we're gonna check that so we could ping 192.168.1 and we can
see if it's gonna be able to ping that and get that get that through so it's
gonna take it a second the first time and then we've got a reply back so we
had to build the Ark table there and so we can ping that again and just make
sure yep it's going through so now we can see that we can see the server or
the server can see the switch so now what we're gonna do is we're gonna go
into the switch and we're going to update that iOS okay so now we're gonna
come in and we're going to copy that file over from the TFTP server so we're
just gonna come in here we're gonna enable our privilege zigzag mode and
then we're going to do a copy and we know make sure that see we can do a copy
that's our command we're gonna do a copy TFTP : flash : press enter and it's
gonna give us the address of the name of the remote host and that's 192.168 10
dot ten it's gonna ask us for our source file name and this is why we copied it
down because instead of just we're just gonna copy and paste this this time and
so we're just gonna paste that in there
we're gonna press ENTER and then we're just gonna ask is that the destination
file that we want to go to and we're gonna confirm that yes and it's gonna
copy it and obviously on a regular switch it's gonna take a little bit more
time you know things work a little bit packet tracer speeds things up a little
bit for you and we're gonna check and make sure that it copied correctly so
we're gonna do a dir and certainly we have our directory there we've got our
twelve version we've got our fifteen version and we're gonna enter a config T
mode so we're gonna be a configuration we're gonna type boot system and we're
gonna paste our name in there again paste that file name in there so we're
gonna paste that in there press ENTER and that put that in there and now we're
gonna copy our runnin over to our we're gonna copy our runnin over to our
startup and configure it yeah there we go hold on I gotta back out of
configuration mode here let's back out one more there we go
so copy run start and it's gonna ask us if that's the right one we're gonna say
yes and we should be able to exit that so let's do a reload I'm gonna proceed
with a reload and if everything worked right there it goes its loading 15 X and
when that boots up that should give us the 15 X version that we can work with
and there we go and almost there and hey we got this video done under 10 minutes
which was my goal and that should show us there so now we can go in and we can
do enable we can do show version and now we can look at our version and we've got
the 15 X on there see software version 15 and that's how you update your iOS
version on our 2960 switch and the packet tracer 7x version and that should
work going forward but if not I'll do videos in the future that update that so
hope you enjoyed the video I hope it was helpful make sure you subscribe to my
channel cuz I do appreciate that make sure you share my videos because I
appreciate that too and if you've got any feedback leave those in the car
that's below I hope you have a great day