Bundys Garage Bundy here
Today Im working on
a vise Im actually
refurbishing it Im painting it
from blue to yellow
dont kknow if you guys can see that
maybe the very edge of it
on the jaws here they have
teeth I want to take the teeth off
to be able to primer this and paint it
the problem Im having is I cannot
get the these screws loose
its basically a big standard screw
so what I tried doing is going in there
the ones on the other jaw came out
very easily.
And as I turn this nothing happens
so I took a hammer here.
And as Im tapping the end of the hammer
Im trying to rotate the screw with the screwdriver
but nothing.
So what I figured Id do is Ithink this would be a
good time to test penetrating oil.
Ive used different
types of penetrating oils in the past.
And what Ive read
Online is that you can actually combine equal parts of
ATF and Acetone and that is, people are saying that is
the best penetrating oil that you can make
or buy not buy that you can make.
Typically I use Liquid Wrench you see it right there.
But uh Im actually gonna try this today.
Thought this would be a perfect, perfect time to test to
test the Acetone and Automatic Transmission Fluid.
So I went to Oreillys Igot me a handheld oiler with a
spout.
And what Im gonna do is fill this shot glass
up three (3) times with Acetone and fill it up three (3)
times with ATF mix it in here.
And then spray Liquid
Wrench into one of these Acetone and ATF into one of
these.
I dont know wait an hour maybe less and see
which bolt breaks free.
So to do this lets see how can
I mark it so you guys can see, I know I will mark it with
some yellow paint that im using you know what
I will actually use some of this primer.
So Ill mark it with
some primer Ill mark this one with primer.
And that will designate ATF and Acetone.
Hopefully you guys can see that, I sprayed just a tad
there.
Alright lets fill this thing up with 50 50 Acetone and
50/50 ATF.
On the article I read it does not specify what
type of ATF it just says ATF.
So theres one shot, do the
next shot, probably be easier if I go like that.
Feels like
Im doing shots of Tequila or something.
Lets do four (4)
A shot in the US is 1.6 ozs.
OK get the Acetone.
Just
like penetrating oil, ATF sure has a distinctive smell to it
dosent it.
One (1), Two (2), Three (3), Four (4), put
the cap back on that.
OK
Bring in the the cap for this, the oiling mechanism, screw
that on.
Shake that around, its gotta be pretty thin by now
Lets see if this is, cool, ok thats tall enough
Hope you guys can see this, so the time is 6:30PM
Put the ATF and Acetone into this one, and put the Liquid
Wrench Penetrating Oil into this one.
Ok
Like I said we will wait about an hour.
Go have some chowits actu
Come back and see if I can break these bolts loose
This one is Acetone and ATF
This one is Liquid Wrench Penetrating Oil
Alright Gentlemen its been a little bit longer than an hour
its actually been about a week
So if you remember we put Acetone and ATF into this one
Liquid Wrench Penetrating Oil into this one
and the amazing this is, Acetone and ATF actually broke
this one loose the Liquid Wrench Penetrating Oil
did not do anything for this one.
So noting happened with the penetrating oil on this one
and ill show you right now.
Turning this one a little bit
There, see
Ill do this one right here
Turning it
Nothing, Nothing at all.
So as you can see
Conclusion to this, little short video
Acetone and ATF are probably the most effective
cheapest penetrating oil you can make
its a mix of 50/50 half Acetone Half ATF
I saw ChrisFix do one with uh same exact ATF as this
one except it was synthetic and he counted the
threads
So it works it truly does work
This one right here I cant get loose
So uh like always if you have found these videos
helpful please Subscribe
Questions, Comments, Concerns you can emails me at
bundysgarage@gmail.com
And like always
I'll Keep'em Rollin' for You