It's Friday fool and you need this tool
Welcome back to another glorious episode of it's Friday fool. You need this tool
My name is Kyle Voss and on Fridays
I bring you a tool a tool that I use here in this shop or that I have featured on this channel
Now this week's tool well
Yeah
So
last couple videos
Working on the bibster. I've had a couple questions about this tool
I havent a feature before and really I haven't shown it in the shop just because
Well, I just got it
And that is a nother metal shear so I've done a couple metal shears on the channel in the past
But I've not done this style metal shear. This is like a reciprocating metal shear
Versus first is something like this. I've done a video
I've done a Friday video. Uh-huh
I've done a Friday video on this particular shear in the past and the way this one works is the actual teeth on either side
are
They don't move they just stay the same and then it has this jaw that kind of cut double cuts
So you get this waste piece that comes off of this
There are definite advantages between the two against each other
So there's some advantages this one has that this one doesn't there's some advantages. This one has that this one doesn't
Which is probably why I got both
So we'll start off with this one
The advantage of this one is that it is faster than this one this one rock and roll's much faster than this
Not much faster. It's a little bit faster than this one. It's kind of a little more
Brainless like you don't necessarily have to be as meticulous
As you would on this one this want to also cut curves better
So you can kind of work your way around
Much better than this one. This one will cut a curve
Very slowly, but good luck trying to gaining you kind of sharp cuts sharp
bends sharp curves
now the advantage of this one over this one is that
This one can cut right down the center of a panel and it's not going to affect either side of the panel
negatively
Whereas this one you can't do that what you're going to have is when you cut with this one
The panel on the left hand side will be fine
be untouched unaffected and the piece that comes off the right hand side is going to be curled and
warped
and really what you want to do when you're cutting panels with this is you kind of want to set it up to where your
waste piece
Comes off the right side all the time
Then it's it's pretty thin because it'll allow it to kind of curl and free itself up and get out of your way much easier
if he tried to cut down the center panel, you'd fight it first of all and
Secondly, it would kind of ruin or mess up the right side of that panel wouldn't really be usable
You'd have to flatten that thing back out. So that is one disadvantage to this one over
this one
They both have their place for sure. I
Recommend you get both
If you want to see the video of this one, I will put you a little thingamajig right there
You can go check this one out
and
Yeah, there you go, this is the true power brand version of this which is probably like the generic the cheaper version
I'll drop you some links into the description as always, dude
You can go check these out
If you need a fast shear if you're shearing off, you know
She metal and you need to you need to make stuff happen. This is a great one to have as long as those things
I mentioned as long as those things I mentioned aren't needed as far as cutting down the center panels and that sort of thing
Basically, that piece goes up and down
and cuts almost like scissors
It's best way to describe it. Alright guys. There you go
the true power
metal shear
This week's tool
As always thank you for joining me I'll see you guys some more this week, it's Friday fool