Use a flat screwdriver.Slide the filter cover clips.
Use a drive socket No.10. Use a Ratchet wrench.Unscrew the air filter housing fastener.
Dismantle the air filter pipe.
Use a drive socket No.8. Use a Ratchet wrench. Remove the engine cover.
Disconnect the high voltage wires from the spark plugs. Use a flat screwdriver.
Note the correct procedure for connecting high-voltage wires to spark plugs.
Use a drive socket No.10. Use a Ratchet wrench. Unscrew the ignition coil fastening screws.
Disconnect the ignition coil plugs. Use a flat screwdriver.
Use a spark plug socket ı16. Use a Ratchet wrench.
Remove the spark plugs with a spark plug wrench and place them on a work surface in the order of installing in the engine.
Apply a thin layer of special grease on the thread surface of new spark plugs.
Install the ignition coil straight down.
Connect the plugs to the ignition coil. Connect the high voltage wires to the spark plugs.
Use a drive socket No.10. Use a Ratchet wrench. Tighten the ignition coil fastening.
Install the plastic engine cover. Use a drive socket No.8. Use a Ratchet wrench.
Install the air filter pipe.
Screw the filter housing fastening bolts. Use a drive socket No.10. Use a Ratchet wrench.