my guys Kirk and Jay here with Kirk Giordano plastering today I'm going to show you some
intricate detailed laughing I've had about ten questions all involved different things were
doing so this is going to get a bit complicated we had lighten up and turned the weed man off
for a minute we were rocking out with him just so we could point this out real quick here's what we
got guys we got a lot of Windows we've got a fancy house that sees all the bridges this we're so high
up in the air you can see San Francisco Golden Gate if I had my eyes out of twenty-year-olds
eyes I'd be able to see San Mateo anyway let me show you what we're doing here guys because a
lot of you keep calling me and say hey where do we put these screens at well this one here they
broke it all out now generally back here we got a screed so we just stuck our screed on that screed
and over here we have a screed it should be above the concrete guy so I just used these two screens
as a guide there's a couple areas where we have this so that's number one because folks always
ask me where do you put the screens Kirk OH weep screed then we're going to put our paper on top
of here and go and lift this and go under here I'll show you some other things because we do
get I got a lot of we're busy on this particular job so okay say take for example this door here
another another thing folks asked me is well how do you get the paper under the paper well notice
I just use this as a guide I put my knife here and went straight down so I got a straight cut
on this paper now what I do is what I already did this but to prove a point to you guys where
you say how do you get your paper underneath the paper put it say 'under like like so here
squeeze it in far as you can under the existing up and down up and down tack it down oh okay I
already have a piece here but just to prove a point that you guys asked me take a knife
utility knife okay new blade this is a brand new blade take it follow the door you don't
gotta look at it boom and that's done now what we do is we take this here and we push it back
here does it matter if this papers beat up no because we already watertight it here so what
I'll generally do is tack this beat-up stuff here give you an idea and does this matter no
because we have two layers all the way under here now what I'll generally do is take my
hammer tacker and if it gets stuck like that we just take it out or a hammer then we push this
wire back just like this guy and what I'm about to show you is actually quite easy and here we
did the same thing with the screech I get this ladder out of the way okay no you guys say well
gee do I need new wire what kind of wired I do I use okay yeah say for example this wire here hey
notice we got lucky there it equals to the door however over here you can zoom in here
Jacob you folks that asked me this question well the wire doesn't quite reach do I have to go and
find that wire now we keep I keep a ton of wire on my truck just like this because well unfold
it cut it put it in there or you can go to the corner aid now why doesn't everybody use corner
aids for this because Y is cheaper corner aids are about five six bucks apiece but if you got
the cash and you want to save some time you could use corner aid you could use three point
four mesh you could use any kind of wire as long as it's furred properly so for example
now guys you put this piece of wire right here this saves a lot of time you can see
it over here now this clean edge here gives me a chance to put my polyurethane caulking
around here so let's move on guys sure quite a few things here this here they had styrofoam
mold of course they took it off we put this one back together to prove a point I'm gonna answer
another thing - this is like I say quite the complicated video or a complicated job anybody
know what kind of texture this is man this is a fine acrylic finish it's not as smooth as you can
get next to a smooth coat here's what I wanted to tell you guys okay this styrofoam molds and
a lot of people say what should i do Kirk should I save them and if so how well I recommend it to
the fella who did the work here I said G save the molds and he said well how do you how can
we do that I could invest in a sawzall and some thirteen dollar blades that go through masonry
you'll go through about five that's about 50 bucks in blades and you actually take that blade and you
start here and you work your way all you're doing is you're cutting through some masonry stick it
adhere products so it'll cut right through here and if you know what you're doing you can just
avoid the window and cut these off save these but he didn't save them so he's looking at about $800
because it's a small order special order anybody know what kind of a finish is on this particular
mold I mean either no actually it it looks I did something like this about 15 years ago it comes
in a can I think its flex all and you spray it if you spray it on just styrofoam it something
in there the acetone or something just shrinks it up like a raisin so that's what they did on
this and these are just regular styrofoam molds that are pre coated then we put a color finish on
them also guys always say these molds if you can and you think gee whiz I'm gonna spend 50 bucks
on Saul blades this guy's gonna spend $800 plus about six hours to try to find these molds and
we're gonna install them anyway guys I thought I'd point out a whole bunch of stuff that's
going on here we still got a scratch to brown it put the molds on and do the acrylic finish
one more thing since I'm on the acrylic finish I don't know if the camera will show this but I
had told the fella I said well I can do as well as the next guy and we can put an acrylic finish
to this point here all the way to the front and he says well what do you mean the next guy said
well this wall was done by a separate person he said how can you tell that I said because there's
a color difference this won't show it right there but right here can you see that color difference
it's a tint off this is a different tint than this as a different person who applied this too because
I can see it I can see the tint so in other words they already changed this window anyway they're
changing all the rest of these just to upgrade but they had some really beautiful fancy windows
to begin with when we get to the stage where we're doing the styrofoam we'll show you how to do that
stuff too I think anyway my name is Kirk before you folks asked me all these tedious questions
I thought we'd take time off turn the radio down for a second and just explain it because we can
my name is Curt Jason on the camera we thank you for watching and as you're all see you guys on
the next one once again folks we thank you for watching and I really enjoy all your comments
if you guys like this video please click the like button down below and also if you enjoy
what we do subscribe to our channel so we can keep making these videos for you my name is Kirk
and Jay we thank you for watching and from the entire giordano family we'll see on the next one