Hi, DIYers.
This is Michael from AlarmGrid, and today I'm
going to show you how to pair your Schlage Z-Wave Door
Lock with your Honeywell Lyric Alarm System.
Now, the advantage to pairing your Schlage Z-Wave Door
Lock with your Honeywell Lyric Alarm System
is that you will be able to control
the lock from the panel, you will be able to lock
and unlock the door, and if the panel is monitored
and you have access to Total Connect 2.0,
it will get pushed over to that service,
and you will be able to control it remotely from your phone,
from a web browser.
You can include it with Total Connect 2.0 smart scenes
and pair it with other Z-Wave devices
to have them activated automatically
based on a set schedule or predetermined system events.
It is a very handy feature.
And we have two Schlage Z-Wave Door Locks here.
We are going to be working with the top one today.
They both look very nice, very clean,
polished looking door locks, fit in with any modern decor.
If you have an older looking home,
this has more of a rustic look.
We think they both look quite great.
They can be a bit finicky when pairing with the panel.
But once you get them paired, they
are usually pretty reliable.
So it is just a matter of completing the initial pairing
process, which is actually very simple.
So I'm going to turn our attention to the Lyric Alarm
System here.
OK, so we are at the Lyric panel now.
And what we are going to do, we are
going to put it into exclusion mode
to clear the device from the network.
That will wipe out any residual Z-Wave network data,
so we can make a clean pair with the panel.
You always want to do this when pairing a Z-Wave device.
So we are going to go to Automation,
and then we are going to press the Down arrow.
We are going to press Tools, and we are
going to go to Exclude Devices.
Remember, we want to do this before including the device.
And now, we are going to turn our attention to the Schlage
Lock.
OK, so now we have our keypad pulled up on the Schlage Z-Wave
Door Lock.
And we are going to enter in the programming code, which
we actually had to open up the lock.
I'm going to show you that real quick.
We had to remove these screws to access the inside
to get to the sticker.
And there is a programming code on there,
it is a six-digit code.
And what you want to do is you want
to actually write down this code and store it somewhere safe.
We have ours here.
We are going to store it somewhere safe, because we
are responsible individuals.
So we need to get the keypad to reappear
here, which can take a second.
OK, so what we want to do is we want
to enter in the programming code plus the number zero.
So our programming code is 925979 and then 0.
And then, if you turn our attention to the Lyric System,
you will see that an unknown device has
been excluded from the network.
That is actually the Schlage Z-Wave Door Lock.
And now we will be able to pair it with the network.
So we are going to go back to the Lyric here.
And we are going to press the Return arrow
to go back to the Z-Wave menu.
And this time, we are going to go to Include Devices.
And now, we are going to do the same pairing process
that we did for exclusion on the Schlage Z-Wave Door Lock
to pair it this time.
So we pull up the keypad.
We enter in our programming code, 925.
It didn't like that, so we are going
to try again here, 925979 and then 0.
And the device has been found on the Lyric System, that
would be the Schlage Z-Wave Door Lock, so it has been
successfully paired the system.
We are just going to click Done here.
And we don't have to press Include
down there, that would just put the system back
into inclusion mode.
It has already been paired.
We don't have to do it again.
So we are going to press Back.
And if we go to Locks, we can see
that Lock 242 is the Schlage Z-Wave Door Lock.
And we are just going to demonstrate it real quick.
And we are going to press lock.
And you can see that the Schlage Z-Wave Door
Lock is working properly.
So we have successfully paired it with the Lyric System.
If you found this video helpful, please like the video below,
give it a thumbs up.
Remember to subscribe to our channel to get updates
on future videos.
And if you have any questions about the Schlage Z-Wave Door
Locks or the Honeywell Lyric Alarm System,
or if you are interested in monitoring service,
please email us at support@alarmgrid.com.
Hope you enjoyed the video.
Thanks.