all right all done climbing on brushes on the ground and it do some saw
maintenance why the guys clean up the brush everything I need is right here in
this little pouch good system on your belt if you need it on the top of the
Timbeline sharpener I have a top saw ultimate chainsaw tool so first thing I
do on my cutting system is chains loose loosen up the bar nut use a large
screwdriver get the right chain tension
that's about right a little more time I pull off the whole housing use the bar
groove clean-out tool to clean out the groove of the bar and get all the
sawdust out of here like using the small screwdriver in the topsaw to clean out
the oiling hole to make sure it's oiling properly clean this whole system
out and once I've done all that cleaned it out tighten my chain the top saw next
step in the cutting system is using the timber line sharp and other things great
if you want to wear a pair of gloves using this thing so as the bar is
pointing towards you this thing slides right over the top things very clever
then you're gonna put this crank handle in here bring it up to the tooth slide
it in there and then this is going to rocker back and forth so what you
want to do on this rocker is kind of split the difference
so as this rockering tighten it up tighten this up it's about right pull
out the sharpener quarter turn brings out tooth forward that's how much metal
you're going to take off you stay on there pretty tight the center one
actually grabs the chain and keeps it vertical put your sharpener right in
there
sharpen up a pencil that's it a to sharp pull it up put my
gloves on here pull this thing forward
I'm going to slide it to the next tooth this is so clever is on the next tooth
that's actually going the opposite way so slide the sharpener in there always
going clockwise tooth is sharp pull it up next to let's open it up next tooth a
couple cranks always want to go clockwise on this thing that's it so
that's it for the whole cutting system use the topsaw, pull the housing off
clean it all up clean up the oil holes and put it back on make sure you have a
nice tension chain tension use a Timberline chainsaw sharpener you go through this
whole chain I don't know a couple minutes it's perfectly sharp this is
this is the set screw so if you want to take off more metal you bring this
forward then you don't touch this again follow the teeth so they all the exact
same size that way you always get a really good straight cut topsaw and
Timberline all you need